Instant compatibility check with FPS benchmarks and optimization tips
Thief
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Your GPU supports ray tracing.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 31 | 35 | 42 | 57 |
| 1440p QHD | 52 | 56 | 72 | 96 |
| 1080p Full HD | 80 | 83 | 110 | 141 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Thief on Your System
The AMD Ryzen 5 7600 and NVIDIA GeForce RTX 2060 pairing delivers a split result in Thief, with strong performance at 1080p, solid playability at 1440p with adjusted settings, and no playable options at 4K. For a game released in 2014, this combination still requires careful settings selection at higher resolutions due to the RTX 2060's 6 GB VRAM and mid-range compute power. The data shows that Thief remains demanding enough at Ultra settings to push this combo below the 60 FPS threshold at both 1440p and 4K.
Measured FPS Breakdown
At 1920x1080, the combo performs well across all presets. Low settings produce an average of 141.1 FPS, Medium yields 109.5 FPS, High reaches 83.1 FPS, and Ultra drops to 80.1 FPS. The gap between High and Ultra is small, only 3 FPS, which indicates that the GPU is not the limiting factor at 1080p when both presets are considered. Every preset at 1080p clears the 60 FPS playable threshold by a wide margin, with the lowest average being 80.1 FPS at Ultra.
Moving to 2560x1440, the averages fall noticeably. Low settings still deliver 95.9 FPS, which is a comfortable margin above 60. Medium drops to 72.2 FPS, still playable. High falls to 56.3 FPS, below the threshold, and Ultra reaches only 52.2 FPS. The transition from 1080p to 1440p costs roughly 24 FPS at Low settings, 37 FPS at Medium, 27 FPS at High, and 28 FPS at Ultra. The data indicates that the RTX 2060's 192-bit memory bus and 336.0 GB/s bandwidth are sufficient for Low and Medium, but not for the heavier presets at this resolution.
At 3840x2160, the combo cannot maintain playable framerates on any preset. Low settings average 57.1 FPS, just short of the 60 FPS threshold. Medium drops to 42.3 FPS, High to 34.9 FPS, and Ultra to 30.6 FPS. The scaling from 1440p to 4K is severe, with Low losing 38.8 FPS, Medium losing 29.9 FPS, High losing 21.4 FPS, and Ultra losing 21.6 FPS. The RTX 2060's pixel rate of 80.64 GPixel/s is clearly overwhelmed at 4K, even on the least demanding preset.
CPU and GPU Roles
For this game, the GPU is the dominant factor at every resolution, but the CPU becomes relatively more important as resolution drops. At 4K, the framerate is almost entirely GPU-bound, as evidenced by the narrow range between Low and Ultra: 57.1 FPS versus 30.6 FPS, a 26.5 FPS spread. The Ryzen 5 7600's single-core performance, measured at 999 in 3dmark single thread and 1852 in Cinebench R23 single core, is more than adequate to feed the RTX 2060 at 4K.
At 1440p, the CPU starts to show its headroom. Low settings reach 95.9 FPS, which is close to what the GPU can deliver when pixel load is reduced. The Ryzen 5 7600's 6 cores and 12 threads, with a boost clock of 5.10 GHz, keep the minimum framerates stable even when the GPU is under pressure at Ultra (52.2 FPS). The CPU's 32 MB shared L3 cache helps maintain consistent frame delivery in Thief's dense city environments.
At 1080p, the CPU's role becomes more visible. Low settings hit 141.1 FPS, which is high enough that the Ryzen 5 7600's thread scheduling and cache latency start to matter. The CPU's Cinebench R23 multicore score of 12735 indicates strong multi-threaded capability, but Thief's engine, released in 2014, likely leverages fewer threads. The single-thread score of 1852 suggests the CPU can handle the game's main thread without bottlenecking the RTX 2060 at 141 FPS.
The scaling between presets reveals the GPU bottleneck. At 1080p, going from Low to Ultra costs 61 FPS (141.1 to 80.1), while at 4K the same preset change costs 26.5 FPS. This inverse relationship confirms that the GPU is saturated at higher resolutions, leaving less headroom for preset scaling. The RTX 2060's 6 GB GDDR6 memory and 6.451 TFLOPS FP32 performance are the limiting factors, not the CPU.
FAQ
Q: Can this combo run Thief at 60 FPS on Ultra settings?
A: Only at 1920x1080. The measured average at 1080p Ultra is 80.1 FPS, which clears the 60 FPS threshold. At 2560x1440 Ultra, the average drops to 52.2 FPS, and at 3840x2160 Ultra, it falls to 30.6 FPS.
Q: What is the best preset for 1440p gaming?
A: Medium settings at 2560x1440 produce an average of 72.2 FPS, which is the highest preset that stays above 60 FPS. Low settings reach 95.9 FPS, but Medium offers the best balance of visual quality and performance.
Q: Is the Ryzen 5 7600 holding back the RTX 2060 in Thief?
A: The data indicates no CPU bottleneck. At 1080p Low, the combo reaches 141.1 FPS, which is high enough to stress the GPU. The CPU's single-thread score of 1852 in Cinebench R23 and 3dmark single-thread score of 999 are sufficient for this game's engine.
Q: Why is 4K not playable on any preset?
A: The RTX 2060 cannot deliver 60 FPS at 3840x2160 on any settings. The best result is 57.1 FPS at Low, which is 2.9 FPS short of the playable threshold. The GPU's 192-bit memory bus and 6 GB VRAM are the primary constraints.
Q: How does the RTX 2060 compare to its nearest rivals in this context?
A: The RTX 2060's average benchmark score is 15290, which is nearly identical to the NVIDIA GeForce GTX 580 (15283, 0% delta), the AMD Radeon 680M (15270, 0.1% delta), the RTX 3050 OEM (15199, 0.6% delta), and the AMD Radeon RX 7600 (15171, 0.8% delta). These small deltas mean the RTX 2060 sits in a cluster of similar-performing GPUs.
Q: What framerate can I expect at 1080p High settings?
A: The measured average is 83.1 FPS, which is well above the 60 FPS threshold. This preset is a strong choice for 1080p because it stays above 80 FPS while offering better visual quality than Medium (109.5 FPS) or Low (141.1 FPS).
How This Combo Ranks
The AMD Ryzen 5 7600 and NVIDIA GeForce RTX 2060 combination ranks 2925 out of 3720 tested combos in Thief. This places it in the lower third of all tested configurations, which is expected given the RTX 2060's age and the game's demands at higher resolutions. The CPU itself is not the limiting factor: the Ryzen 5 7600 sits at the 78th percentile among all CPUs, with an average benchmark score of 26324. Its nearest rivals include the AMD Ryzen 9 6900HX (26274, 0.2% delta), AMD Ryzen 7 7435HS (26402, -0.3% delta), Intel Core i9-11900KF (26212, 0.4% delta), and AMD Ryzen 5 8540U (26187, 0.5% delta). These tiny deltas mean the 7600 is effectively tied with these chips in general compute.
The GPU holds the combo back in the rankings. The RTX 2060 ranks at the 58th percentile among all GPUs, with an average benchmark score of 15290. Its nearest rivals are the GTX 580 (15283, 0% delta), Radeon 680M (15270, 0.1% delta), RTX 3050 OEM (15199, 0.6% delta), and Radeon RX 7600 (15171, 0.8% delta). In Thief specifically, this GPU-level performance translates to the measured framerates, which are playable at 1080p and 1440p with settings adjustments, but not at 4K.
The rank of 2925 out of 3720 means roughly 78% of tested combos outperform this pairing in Thief. That is consistent with a GPU that was end-of-life as of the data collection and a CPU that is current-generation. The CPU's strong standing (78th percentile) does not compensate for the GPU's mid-range position (58th percentile) in this game's GPU-heavy workload.
The Verdict
This PC can run Thief, but the answer depends heavily on resolution. At 1920x1080, all four presets (Low, Medium, High, Ultra) clear the 60 FPS threshold, with the lowest average being 80.1 FPS at Ultra. This is a fully playable experience at maximum settings.
At 2560x1440, playability is conditional. Low (95.9 FPS) and Medium (72.2 FPS) are above 60 FPS, but High (56.3 FPS) and Ultra (52.2 FPS) fall short. The verdict data lists Low and Medium as playable settings, with Medium being the best playable preset at 72.2 FPS.
At 3840x2160, no preset is playable. The closest is Low at 57.1 FPS, which misses the 60 FPS threshold by 2.9 FPS. Medium (42.3 FPS), High (34.9 FPS), and Ultra (30.6 FPS) are all significantly below playable. The verdict data confirms an empty playable settings list for 4K.
For a practical recommendation: use this combo for 1080p gaming with all settings maxed out, or for 1440p gaming with Medium settings. Avoid 4K entirely if you require 60 FPS.
Best Settings per Resolution
At 3840x2160, there are no playable settings. The best average is 57.1 FPS at Low, which misses the 60 FPS threshold. The verdict data shows no best settings and no average FPS at best for this resolution, confirming that no preset achieves playable performance.
At 2560x1440, the best playable preset is Medium, with an average of 72.2 FPS. This is the most demanding preset that stays at or above 60 FPS. Low settings reach 95.9 FPS, but Medium provides better visual quality while maintaining a 12.2 FPS margin above the threshold.
At 1920x1080, the best playable preset is Ultra, with an average of 80.1 FPS. All four presets are playable, but Ultra offers the highest visual quality while still delivering a 20.1 FPS margin above 60 FPS. The scaling from Medium (109.5 FPS) to High (83.1 FPS) to Ultra (80.1 FPS) shows diminishing returns, but the Ultra preset remains comfortably playable.
For users prioritizing framerate over visuals, 1080p Low (141.1 FPS) or 1440p Low (95.9 FPS) are the highest-refresh options. For balanced quality and performance, 1080p Ultra at 80.1 FPS or 1440p Medium at 72.2 FPS are the recommended choices. The data does not support any playable configuration at 4K, so users with 4K displays should either lower resolution or upgrade the GPU.