Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Thief
Stealth 2014

Thief

83%
Great Match Your system meets recommended requirements.

Performance

1080p (Full HD)

Low 1080p Measured
185 FPS
Ultra 1080p Measured
151 FPS

1440p (2K / QHD)

Low 1440p Measured
169 FPS
Ultra 1440p Measured
135 FPS

4K (Ultra HD)

Low 4K Measured
138 FPS
Ultra 4K Measured
82 FPS
6.5ms Frame Time
10ms Input Latency
4K Best Resolution

Requirements Check

Processor
Required 37,499
Your CPU 24,964
Graphics Card
Required 27,801
Your GPU 79,842

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 82 85 113 138
1440p QHD 135 138 151 169
1080p Full HD 151 155 170 185

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 155
1920x1080 Low 185
1920x1080 Medium 170
1920x1080 Ultra 151
2560x1440 High 138
2560x1440 Low 169
2560x1440 Medium 151
2560x1440 Ultra 135
3840x2160 High 85
3840x2160 Low 138
3840x2160 Medium 113
3840x2160 Ultra 82

Performance Analysis: Thief on Your System

The AMD Ryzen 5 7500F paired with the NVIDIA GeForce RTX 5090 delivers exceptional performance in Thief, with benchmark results showing average frame rates well above the 60 FPS threshold at every tested resolution and preset. This combination ranks 252nd out of 3,720 tested configurations, placing it in the top 7% of all systems evaluated for this title.

Similar Performance Alternatives

The CPU and GPU each have closely matched rivals based on aggregate benchmark scores. For the AMD Ryzen 5 7500F, the nearest competitor is the Intel Core i7-11850H, which scores 24,935 versus the 7500F’s 24,964 average — a delta of just 0.1%. The AMD Ryzen 5 8400F trails by 0.2% with a score of 25,005, while the Intel Core i7-13620H is 0.2% behind at 24,911. The Intel Core 5 210H completes the group at 24,872, a 0.4% deficit. These four processors deliver essentially identical multi-threaded performance in synthetic workloads, meaning any of them would produce nearly the same frame rates in Thief when paired with the same GPU.

On the graphics side, the RTX 5090’s average benchmark score of 79,842 places it near the NVIDIA Tesla P100 PCIe 16 GB, which scores 79,605 — a 0.3% gap. The Tesla P100 PCIe 12 GB is 0.6% behind at 79,396, while the AMD Radeon RX 6850M XT sits 1.1% lower at 78,940. Interestingly, the AMD Radeon Pro Vega 64X scores higher at 80,959, putting the RTX 5090 1.4% behind that particular workstation card. These deltas are small enough that in real gaming scenarios, differences would be imperceptible. The RTX 5090’s percentile ranking of 92 among all GPUs confirms its position near the top of the performance hierarchy, though the nearest rivals show that a handful of specialized or workstation-oriented cards can match its aggregate throughput.

CPU and GPU Roles

The benchmark data reveals how the balance between CPU and GPU shifts across resolutions in Thief. At 1920x1080, the RTX 5090 is clearly not the limiting factor — the CPU’s role becomes more prominent. The frame rate spread from Low to Ultra at this resolution is 185.4 FPS down to 151.4 FPS, a 34 FPS range. This relatively modest spread indicates that even at Ultra settings, the system is not fully GPU-bound; the Ryzen 5 7500F’s six cores and 12 threads provide sufficient headroom to keep frame rates high, but the GPU’s massive compute resources are partially underutilized at this resolution.

Moving to 2560x1440, the GPU begins to assert more influence. The Low preset delivers 168.6 FPS, while Ultra drops to 135.1 FPS — a 33.5 FPS spread that remains similar in absolute terms. However, the overall frame rates are lower than at 1080p, showing that the increased pixel count is starting to tax the graphics card. The RTX 5090’s 32 GB of GDDR7 memory and 1.79 TB/s bandwidth are more than adequate for this resolution, but the rendering load grows proportionally with pixel count.

At 3840x2160, the GPU becomes the dominant factor. The Low preset yields 138.2 FPS, but Ultra falls to 81.8 FPS — a 56.4 FPS spread that is significantly wider than at lower resolutions. This dramatic scaling demonstrates that 4K resolution places substantial demands on the graphics pipeline, and the RTX 5090’s 104.8 TFLOPS of FP32 compute is being pushed much harder. The CPU’s influence diminishes at this resolution; the Ryzen 5 7500F’s single-thread score of 3,218 in Cinebench R23 is more than sufficient to keep up with the GPU’s frame output. The data indicates that at 1080p and 1440p, the CPU matters more relative to the GPU, while at 4K, the RTX 5090’s raw rendering power dictates performance.

FAQ

*Q: Can this system run Thief at 4K with maximum settings?*

A: Yes. At 3840x2160 with Ultra settings, the combination produces an average of 81.8 FPS, which clears the 60 FPS playable threshold by a comfortable margin.

Q: How does the RTX 5090 compare to its nearest rival in synthetic benchmarks?

A: The RTX 5090 scores 79,842 on average, which is 0.3% ahead of the NVIDIA Tesla P100 PCIe 16 GB and 0.6% ahead of the Tesla P100 PCIe 12 GB. It trails the AMD Radeon Pro Vega 64X by 1.4%.

Q: What is the highest frame rate achieved by this combo?

A: The maximum average FPS recorded is 185.4 at 1920x1080 with Low settings. At 2560x1440 Low, the average is 168.6 FPS, and at 3840x2160 Low, it is 138.2 FPS.

Q: Does the Ryzen 5 7500F bottleneck the RTX 5090 in this game?

A: The data shows no evidence of a CPU bottleneck. At 1080p, the frame rate scales from 151.4 FPS at Ultra to 185.4 FPS at Low, indicating the GPU is still the primary performance driver even at lower resolutions where CPU load is relatively higher.

*Q: How does this combo rank among all tested systems for Thief?*

A: It ranks 252nd out of 3,720 tested combinations, placing it in the top 6.8% of all configurations evaluated for this game.

Q: What is the frame rate difference between Medium and Ultra at 1440p?

A: At 2560x1440, Medium produces 150.5 FPS on average, while Ultra produces 135.1 FPS — a 15.4 FPS difference. Both are well above the 60 FPS threshold.

How This Combo Ranks

The combination of the AMD Ryzen 5 7500F and NVIDIA GeForce RTX 5090 achieves rank 252 out of 3,720 tested configurations in Thief. This places the system in the 93rd percentile of all combinations, meaning only 251 setups perform better. The ranking reflects the synergy between the CPU and GPU — the 7500F’s Zen 4 architecture with a 5.00 GHz boost clock provides strong single-thread performance, while the RTX 5090’s massive 32 GB frame buffer and 512-bit memory bus handle the game’s texture-heavy scenes without strain.

The top 6.8% positioning is notable given that Thief is a 2014 title with modest system requirements by modern standards. The ranking indicates that this hardware combination is not merely adequate but exceptionally overqualified for the game’s demands. The CPU’s percentile ranking of 77 among all processors and the GPU’s percentile of 92 among all GPUs both contribute to this high placement. The measured frame rates at every resolution and preset exceed 60 FPS, with the lowest recorded average being 81.8 FPS at 4K Ultra. This consistency across the entire settings spectrum is what separates this combo from lower-ranked configurations that might struggle at higher resolutions or preset levels.

The Verdict

This PC can run Thief at every resolution and preset combination tested, with all average frame rates exceeding the 60 FPS playable threshold. At 1920x1080, the system delivers between 151.4 FPS (Ultra) and 185.4 FPS (Low), making it more than capable of driving high-refresh-rate displays. At 2560x1440, performance ranges from 135.1 FPS at Ultra to 168.6 FPS at Low, again comfortably above 60 FPS. Even at 3840x2160, the most demanding scenario, the system maintains 81.8 FPS at Ultra settings and 138.2 FPS at Low. The verdict by resolution confirms that all four settings — Low, Medium, High, and Ultra — are playable at every resolution. The best settings per resolution are Ultra at all three: 151.4 FPS at 1080p, 135.1 FPS at 1440p, and 81.8 FPS at 4K. This hardware combination leaves substantial performance headroom, ensuring smooth gameplay even in the most graphically intense sequences.

Best Settings per Resolution

At 1920x1080, the most demanding preset that stays at or above 60 FPS is Ultra, achieving an average of 151.4 FPS. This is the highest quality setting available and still delivers more than double the playable threshold. At 2560x1440, Ultra also remains the best choice, with an average of 135.1 FPS — a 22.6 FPS reduction compared to 1080p Ultra, but still far above the 60 FPS target. At 3840x2160, Ultra continues to be the optimal preset, producing 81.8 FPS on average. This represents a 53.3 FPS drop from 1440p Ultra, illustrating the substantial cost of 4K rendering. However, the RTX 5090’s raw power ensures that even the heaviest settings remain playable. The scaling from 1080p Ultra (151.4 FPS) to 4K Ultra (81.8 FPS) shows a 46% performance reduction, which is expected given the 4x increase in pixel count. Players seeking maximum visual fidelity can select Ultra at any resolution without dropping below 60 FPS.

Measured FPS Breakdown

The complete frame rate data for this combination in Thief is as follows:

At 1920x1080, the system achieves 185.4 FPS on Low, 169.6 FPS on Medium, 154.6 FPS on High, and 151.4 FPS on Ultra. The difference between Low and Ultra is 34.0 FPS, indicating that the GPU’s rendering load increases by approximately 22% when moving from the lowest to highest preset.

At 2560x1440, performance measures 168.6 FPS on Low, 150.5 FPS on Medium, 138.3 FPS on High, and 135.1 FPS on Ultra. The spread from Low to Ultra is 33.5 FPS, nearly identical to the 1080p spread in absolute terms, but the percentage difference is larger due to lower baseline frame rates.

At 3840x2160, the results are 138.2 FPS on Low, 112.6 FPS on Medium, 85.1 FPS on High, and 81.8 FPS on Ultra. The Low-to-Ultra spread widens significantly to 56.4 FPS, showing that the 4K resolution amplifies the performance cost of higher settings. The transition from Medium to High at 4K incurs a 27.5 FPS penalty, while the High-to-Ultra step costs only 3.3 FPS, suggesting diminishing returns at the top end.

Comparing across resolutions at the same settings, 1080p Ultra (151.4 FPS) drops to 1440p Ultra (135.1 FPS), a 16.3 FPS reduction, then to 4K Ultra (81.8 FPS), a further 53.3 FPS reduction. The 4K to 1440p gap is more than three times larger than the 1440p to 1080p gap, consistent with the pixel count scaling. All 12 measured configurations exceed the 60 FPS threshold, with the lowest margin being 21.8 FPS at 4K Ultra.