The Technomancer

The AMD Ryzen 5 5600F and Intel Arc B570 combination delivers a playable experience in The Technomancer at 1080p and 1440p, but fails to maintain 60 FPS at 4K across all tested settings. Measured frame rates show a steep scaling curve tied directly to resolution, with the combo comfortably handling the game's maximum preset only at 1920x1080.

Measured FPS Breakdown

At 1920x1080, the system delivers its strongest results. The Low preset averages 121 FPS, which is the highest measured average across all configurations. Medium settings drop to an average of 93 FPS, with a minimum of 79 and a maximum of 107. The High preset holds an average of 80 FPS. Pushing to Ultra still keeps the frame rate above the 60 FPS threshold, with an average of 62 FPS. This means every preset at 1080p clears the playable mark, though Ultra sits only 2 FPS above the line.

Moving to 2560x1440, performance drops noticeably but remains viable for half of the settings. The Low preset averages 79 FPS, still a comfortable margin above 60. Medium settings produce an average of 61 FPS, with a minimum of 52 and a maximum of 70. The High preset falls to 52 FPS average, which is below the playable threshold. The Ultra preset manages only 41 FPS average. So at 1440p, only Low and Medium are playable, and Medium barely clears the bar.

At 3840x2160, the system struggles across the board. The Low preset averages 44 FPS, which is the best 4K result. Medium drops to 33 FPS average, with a minimum of 28 and a maximum of 39. High averages 29 FPS, and Ultra falls to 22 FPS. None of these settings reach the 60 FPS playable threshold, indicating that 4K is not a viable resolution for this combination in The Technomancer.

The data shows a consistent pattern: each resolution step down from 4K to 1440p to 1080p yields a substantial jump in average FPS. For example, moving from 4K High (29 FPS) to 1440p High (52 FPS) is a 79% improvement, and then to 1080p High (80 FPS) is another 54% gain. Similarly, the Ultra preset goes from 22 FPS at 4K to 41 FPS at 1440p to 62 FPS at 1080p.

How This Combo Ranks

The AMD Ryzen 5 5600F and Intel Arc B570 combination ranks 2972 out of 3696 tested combos for The Technomancer. This places it in the lower 19.6% of all configurations in the database. The percentile positioning reflects the game's modest hardware demands relative to modern systems — the combo is not a top-tier performer, but it is by no means the weakest tested setup.

Given that the game is an Action RPG from 2016, the rank suggests that many newer or higher-end combinations outperform this pairing. However, the actual measured frame rates show that the combo remains functional at mainstream resolutions. The rank of 2972 out of 3696 indicates that roughly 80% of tested combos deliver higher performance, but the gap is not prohibitive for 1080p gaming. The combo's ranking is more a reflection of the CPU and GPU's mid-range standing rather than an indictment of its ability to run this specific title.

CPU and GPU Roles

The benchmark data reveals that the Intel Arc B570 is the primary bottleneck at higher resolutions, while the AMD Ryzen 5 5600F becomes less relevant as resolution increases. At 1920x1080, the CPU has enough headroom to feed the GPU, allowing the Ultra preset to hit 62 FPS. The jump from High (80 FPS) to Ultra (62 FPS) at 1080p is a 22.5% drop, which is consistent with the GPU being the limiting factor at higher settings.

At 2560x1440, the GPU's workload increases significantly. The Medium preset averages 61 FPS, while High drops to 52 FPS. This 17.3% decrease from Medium to High at 1440p, versus a 14.0% decrease from High to Ultra at 1080p, indicates the GPU is struggling more as pixel count rises. The CPU, with 6 cores and 12 threads based on Zen 3 architecture, is likely not the constraint here — the frame rate scaling between resolutions points to GPU-bound performance.

At 3840x2160, the GPU is clearly overwhelmed. The difference between Low (44 FPS) and Medium (33 FPS) is a 25% drop, and between Medium and High (29 FPS) is another 12.1%. The CPU's role at 4K is minimal; even the Low preset cannot reach 60 FPS, suggesting that no amount of CPU headroom can compensate for the Arc B570's limited rasterization throughput at this resolution. The data supports the conclusion that the GPU dictates performance across all tested settings, with the CPU only mattering at 1080p where it can keep up with the GPU's demands.

Similar Performance Alternatives

The nearest rivals for the AMD Ryzen 5 5600F show that CPU performance is tightly clustered. The Intel Core Ultra 5 225 scores 36938, which is essentially identical to the 5600F's 36945 average benchmark score (0% delta). The AMD Ryzen 5 5500X3D scores 37018, a 0.2% difference, and the AMD Ryzen AI 7 PRO 450 scores 37093, a 0.4% difference. The Intel Core i9-12900T scores 37112, a 0.5% difference. These sub-1% deltas mean that swapping the 5600F for any of these CPUs would produce nearly indistinguishable frame rates in The Technomancer. The game is not CPU-sensitive enough to expose differences of less than 1% in synthetic benchmarks.

For the Intel Arc B570, the nearest GPU rivals also show tight clustering. The NVIDIA GeForce RTX 3070 Mobile scores 20534, a 0.1% difference from the Arc B570's 20556 average. The Intel Arc A750 scores 20582, a 0.1% difference in the opposite direction. The NVIDIA Quadro M4000M scores 20480, a 0.4% difference, and the AMD Radeon R9 M390X scores 20662, a 0.5% difference. Given these margins, any of these GPUs would deliver nearly identical performance in The Technomancer. The RTX 3070 Mobile and Arc A750 are the most direct equivalents, with deltas so small they fall within normal run-to-run variance. Users with these GPUs should expect the same measured FPS figures as the Arc B570, meaning 1080p Ultra at 62 FPS and 1440p Medium at 61 FPS.

Best Settings per Resolution

At 1920x1080, the most demanding preset that stays at or above 60 FPS is Ultra, with an average of 62 FPS. This is the maximum quality setting the combo can handle while remaining playable. The High preset at 80 FPS and Medium at 93 FPS also qualify, but Ultra provides the best visual fidelity within the playable range.

At 2560x1440, the most demanding playable preset is Medium, with an average of 61 FPS. This is a narrow margin above the 60 FPS threshold, and the minimum of 52 FPS indicates occasional dips below the line. The Low preset at 79 FPS is also playable, but Medium offers better quality while still averaging above 60. The High preset at 52 FPS and Ultra at 41 FPS are not viable at this resolution.

At 3840x2160, no preset reaches the 60 FPS threshold. The best average is 44 FPS on Low, which is well below playable. The verdict for 4K is that no settings are recommended, as even the lowest preset cannot maintain a consistent 60 FPS.

The Verdict

The AMD Ryzen 5 5600F and Intel Arc B570 can run The Technomancer, but the experience depends heavily on resolution. At 1920x1080, the combination clears 60 FPS on all four presets, including Ultra at 62 FPS. This is the only resolution where the full quality range is available. At 2560x1440, the combo is playable on Low (79 FPS) and Medium (61 FPS), but High and Ultra fall below the threshold. At 3840x2160, the system cannot reach 60 FPS on any setting, with the best result being 44 FPS on Low.

The data indicates that this pairing is best suited for 1080p gaming, with 1440p viable only at reduced settings. The 4K results are not playable, so users targeting that resolution should look elsewhere. The combo ranks in the bottom 20% of tested configurations, but the actual performance is adequate for its intended market segment. For a game like The Technomancer, which is not particularly demanding by modern standards, this CPU-GPU pairing delivers a smooth experience at 1080p and a passable one at 1440p with settings compromises.