Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Overpower
Action 2023

Overpower

89%
Great Match Your system meets recommended requirements.

Performance

1080p (Full HD)

Low 1080p Measured
125 FPS
Ultra 1080p Measured
60 FPS

1440p (2K / QHD)

Low 1440p Measured
111 FPS
Ultra 1440p Measured
54 FPS

4K (Ultra HD)

Low 4K Measured
95 FPS
Ultra 4K Measured
46 FPS
13.9ms Frame Time
21ms Input Latency
4K Best Resolution

Requirements Check

Processor
Required 37,513
Your CPU 84,003
Graphics Card
Required 27,382
Your GPU 23,021

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 46 55 59 95
1440p QHD 54 65 70 111
1080p Full HD 60 72 78 125

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 72
1920x1080 Low 125
1920x1080 Medium 78
1920x1080 Ultra 60
2560x1440 High 65
2560x1440 Low 111
2560x1440 Medium 70
2560x1440 Ultra 54
3840x2160 High 55
3840x2160 Low 95
3840x2160 Medium 59
3840x2160 Ultra 46

Performance Analysis: Overpower on Your System

Intel Core Ultra 9 290K Plus paired with the Intel Arc B580 presents an interesting study in bottleneck dynamics for Overpower. The CPU is a top-tier desktop part, scoring in the 96th percentile among all tested CPUs, while the GPU sits in the 68th percentile. This gap suggests the graphics card is the primary limiting factor in most scenarios, a hypothesis the measured frame rates across resolutions and presets largely support. The data indicates a system that can handle the game comfortably at 1080p and 1440p with high settings, but struggles to maintain a steady 60 FPS at 4K unless settings are dropped significantly.

Similar Performance Alternatives

For the CPU, the Intel Core Ultra 9 290K Plus is flanked by very close competitors. The Intel Core Ultra 9 285K is the nearest match, with an average benchmark score of 83,807, just 0.2% lower than the 290K Plus’s 84,003. This indicates that in CPU-bound scenarios, users would experience nearly identical performance. The AMD EPYC 4584PX (83,090, 1.1% slower) and AMD EPYC 9135 (82,980, 1.2% slower) are also within a hair's breadth, though these are server-class parts. On the other side, the AMD EPYC 7F72 scores 85,072, which is 1.3% higher, suggesting it holds a slight edge in multi-threaded workloads.

On the GPU side, the Intel Arc B580’s average benchmark score of 23,021 places it in a peculiar group. The AMD Radeon RX 580 2048SP (23,061) is virtually tied, being just 0.2% faster. More surprisingly, the NVIDIA GeForce RTX 2080 (22,895) is 0.6% slower, and the NVIDIA GeForce RTX 3080 (23,172) is only 0.7% faster. This indicates that for this game, the Arc B580’s rasterization performance is in the same league as these older or higher-tier cards, despite architectural differences. The NVIDIA P106-100 (23,249) is 1% faster, rounding out a group where the performance deltas are all under 1.5%, meaning any of these GPUs would behave similarly in Overpower, with the CPU likely dictating the final frame rate.

CPU and GPU Roles

The benchmark data reveals a clear shift in system bottleneck as resolution and settings change. At 1080p, the CPU’s high single-thread and multi-thread scores (7,303 in Cinebench R23 single-core, 51,731 in multi-core) are more than sufficient to feed the GPU. The frame rate scales meaningfully with GPU load: from 125 FPS at Low to 60 FPS at Ultra. This 65 FPS drop between Low and Ultra settings at the same resolution is a strong indicator that the GPU is the limiting factor, as the CPU’s workload does not increase proportionally with graphics settings.

At 1440p, the trend continues. The average FPS at High (65) is only 7 FPS lower than at 1080p High (72), showing a modest performance hit from the resolution increase. This suggests the CPU can still keep up, but the GPU is working harder. The gap between Low (111 FPS) and Ultra (54 FPS) at 1440p widens to 57 FPS, again pointing to the GPU as the primary constraint.

When moving to 4K, the GPU becomes the overwhelming bottleneck. At 4K High, the average FPS drops to 55, just below the 60 FPS playable threshold. The scaling from 1440p High (65 FPS) to 4K High (55 FPS) is a 15% reduction, which is substantial. The difference between Low (95 FPS) and Ultra (46 FPS) at 4K is a 49 FPS spread, the largest of any resolution. This data implies that at 4K, the CPU is largely idle, waiting on the Arc B580 to render frames. The CPU’s role is diminished to the point where its 24 cores and 5.80 GHz boost clock provide no tangible benefit over a much weaker processor.

Measured FPS Breakdown

At 3840x2160 (4K), the results are as follows:

  • Low: 95 FPS average.
  • Medium: 59 FPS average, with a minimum of 50 and a maximum of 68 FPS. This shows frame pacing is inconsistent, dipping below the playable threshold.
  • High: 55 FPS average. This is below the 60 FPS target, making it unplayable by the stated metric.
  • Ultra: 46 FPS average. The most demanding preset yields the lowest result, a significant 49 FPS drop from Low.

At 2560x1440 (1440p):

  • Low: 111 FPS average.
  • Medium: 70 FPS average, with a minimum of 59 and a maximum of 80 FPS. The minimum is right at the edge of playability.
  • High: 65 FPS average. This clears the 60 FPS threshold with a small margin.
  • Ultra: 54 FPS average. This preset fails to maintain 60 FPS.

At 1920x1080 (1080p):

  • Low: 125 FPS average.
  • Medium: 78 FPS average, with a minimum of 66 and a maximum of 90 FPS.
  • High: 72 FPS average.
  • Ultra: 60 FPS average. This is exactly at the playable threshold, meaning it is playable but with no headroom for demanding scenes.

FAQ

*Q: Can this PC run Overpower at 4K with high settings?*

A: No. The measured average FPS at 3840x2160 with High settings is 55, which is below the 60 FPS playable threshold. The only playable setting at 4K is Low, which averages 95 FPS.

Q: What is the best settings preset for 1440p?

A: According to the data, High is the best playable preset at 2560x1440, yielding an average of 65 FPS. Ultra drops to 54 FPS, which is not playable.

Q: Is the Intel Core Ultra 9 290K Plus or the Intel Arc B580 the bottleneck at 1080p?

A: The GPU is the bottleneck. At 1080p, the frame rate drops from 125 FPS at Low to 60 FPS at Ultra, a 65 FPS decline that scales with GPU load. The CPU’s performance (96th percentile) is far above the GPU’s (68th percentile), so it is not the limiting factor.

Q: How does the Arc B580 compare to an RTX 3080 in this game?

A: The benchmark scores show the Arc B580 (23,021) is only 0.7% slower than the RTX 3080 (23,172). This means in Overpower, the two GPUs would produce very similar frame rates, assuming the same CPU.

Q: What is the minimum FPS at 1080p Medium settings?

A: The minimum FPS recorded at 1920x1080 with Medium settings is 66, with an average of 78 FPS and a maximum of 90 FPS. This indicates smooth performance with no dips below the playable threshold.

Q: Does the 4K Ultra setting ever reach 60 FPS?

A: No. The average FPS at 3840x2160 Ultra is 46, with no minimum or maximum data provided, but the average is far below the 60 FPS target. The system cannot handle this preset.

Best Settings per Resolution

The most demanding preset that stays at or above 60 FPS average is as follows:

  • 3840x2160: Low is the only playable preset, averaging 95 FPS. Medium (59 FPS), High (55 FPS), and Ultra (46 FPS) all fail to meet the threshold.
  • 2560x1440: High is the best playable preset, averaging 65 FPS. Medium (70 FPS) and Low (111 FPS) are also playable, but High offers the highest visual quality while maintaining playability. Ultra (54 FPS) is not playable.
  • 1920x1080: Ultra is the best playable preset, averaging exactly 60 FPS. All presets (Low at 125 FPS, Medium at 78 FPS, High at 72 FPS) are playable, but Ultra provides the maximum visual fidelity while just clearing the threshold.

How This Combo Ranks

This specific CPU and GPU combination ranks 2788th out of 3713 tested combos in Overpower. This places it in the bottom 25% of all system configurations. Given the CPU’s high percentile (96th) and the GPU’s mid-range percentile (68th), this ranking is a direct consequence of the GPU holding the system back. In a game like Overpower, where frame rates are heavily GPU-dependent, the Core Ultra 9 290K Plus’s power is largely wasted. The ranking suggests that many other combinations, likely with a more balanced CPU and GPU pairing, would deliver better performance for this specific title. The data implies that this combo is overkill on the CPU side and underpowered on the GPU side for the demands of Overpower.

The Verdict

Yes, this PC can run Overpower, but with significant caveats depending on the resolution. At 1080p, it is fully playable at all presets, including Ultra with an average of 60 FPS. At 1440p, it is playable up to High settings, averaging 65 FPS, but Ultra falls short at 54 FPS. At 4K, the system is only playable at Low settings, averaging 95 FPS; all higher presets fail to reach the 60 FPS threshold. The verdict by resolution confirms this: 1080p allows Ultra, 1440p allows High, and 4K only allows Low. The system is a capable 1080p and 1440p gaming machine for this title, but it is not a 4K gaming solution for demanding settings.