Instant compatibility check with FPS benchmarks and optimization tips
Overpower
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 40 | 49 | 52 | 84 |
| 1440p QHD | 47 | 57 | 62 | 98 |
| 1080p Full HD | 53 | 64 | 69 | 110 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Overpower on Your System
Overpower is well within reach of the Intel Core Ultra 9 290K Plus and Intel Arc B570 pairing — provided settings are chosen sensibly. Measured benchmark data shows the combo clearing the 60 FPS playable threshold at Low settings in 4K, Medium at 1440p, and High at 1080p, with Ultra falling short at every resolution. The Arc B570, sitting in the 65th percentile of all tested GPUs, is the component doing the heavy lifting here, while the 96th-percentile Core Ultra 9 290K Plus never comes close to being the limiter.
Measured FPS Breakdown
At 1920x1080, the combo averages 110 FPS on Low, 69 FPS on Medium, 64 FPS on High, and 53 FPS on Ultra. The Medium run is the only configuration with full frame-time telemetry: it dips to a minimum of 59 FPS and peaks at a maximum of 79 FPS. That min figure matters — it means Medium at 1080p holds essentially at the 60 FPS line even in the worst measured moments, not just on average.
At 2560x1440, averages step down to 98 FPS on Low, 62 FPS on Medium, 57 FPS on High, and 47 FPS on Ultra. Medium again carries min/max data: a floor of 52 FPS and a ceiling of 71 FPS. The sub-60 minimum indicates occasional dips below the threshold at this preset, even though the average stays comfortably above it.
At 3840x2160, the results are 84 FPS on Low, 52 FPS on Medium, 49 FPS on High, and 40 FPS on Ultra. The Medium run records a minimum of 44 FPS and a maximum of 60 FPS — the average itself sits below the playable line, so 4K beyond Low is not a smooth experience on this hardware.
The pattern across the data is consistent and clean: each jump in resolution costs roughly 10 to 30 FPS depending on preset, and each step up in quality tier costs single-digit to low-double-digit frames. There are no anomalies or outliers — performance scales predictably in both directions.
FAQ
Q: Can the Intel Core Ultra 9 290K Plus + Arc B570 run Overpower at 1080p?
A: Yes, comfortably. Low averages 110 FPS, Medium 69 FPS, and High 64 FPS — all above the 60 FPS playable threshold. Only Ultra, at 53 FPS, falls short.
Q: Can this combo handle Overpower at 4K?
A: Only at Low settings, which average 84 FPS. Medium (52 FPS), High (49 FPS), and Ultra (40 FPS) all sit below the playable threshold at 3840x2160.
Q: What is the best-looking setting that stays at 60 FPS at 1440p?
A: Medium, with an average of 62 FPS. High drops to 57 FPS on average, below the threshold.
Q: How strong is the CPU in this pairing?
A: Very. The Core Ultra 9 290K Plus ranks in the 96th percentile versus all tested CPUs, with an average benchmark score of 84003 — within 0.2% of the Intel Core Ultra 9 285K (83807) and ahead of the AMD EPYC 4584PX by 1.1% and the AMD EPYC 9135 by 1.2%, while trailing the AMD EPYC 7F72 (85072) by 1.3%.
Q: How does the Arc B570 compare to rival GPUs?
A: It sits in the 65th percentile of all GPUs with an average score of 20556 — statistically even with the Intel Arc A750 (20582, -0.1%), the NVIDIA GeForce RTX 3070 Mobile (20534, 0.1%), and the NVIDIA Quadro M4000M (20480, 0.4%), and just behind the AMD Radeon R9 M390X (20662, -0.5%).
Q: What is the single highest frame rate recorded for this combo in Overpower?
A: The 1080p Low average of 110 FPS is the highest average in the dataset; the highest individual maximum recorded is 79 FPS on the 1080p Medium run.
CPU and GPU Roles
The GPU is decisively the governing component in Overpower on this system, and the resolution scaling proves it. Moving from 1080p to 1440p on Medium costs 7 FPS (69 to 62); moving from 1440p to 4K on the same preset costs another 10 FPS (62 to 52). If the CPU were the bottleneck, higher resolutions would show nearly flat performance — they do not. Frame rates fall steadily as pixel count rises, which is the signature of a GPU-limited pipeline.
The preset scaling reinforces this. At a fixed 1080p resolution, going from Low to Ultra nearly halves performance (110 to 53 FPS) — a pure graphics workload effect. Meanwhile, even at 4K Low, where CPU load would be most visible, the combo still delivers 84 FPS, well beyond what the Medium preset manages at the same resolution. The Core Ultra 9 290K Plus, with 24 cores and 24 threads boosting to 5.80 GHz and single-thread scores like 7303 in Cinebench R23 and 4823 in PassMark, is nowhere near its limit in this game. For Overpower specifically, GPU headroom — not CPU headroom — determines what settings are reachable at each resolution.
How This Combo Ranks
Across all 3713 tested hardware combinations in Overpower, this pairing ranks 2987th. That places it in the lower portion of the field — the Arc B570 is a mid-tier Battlemage card with 2304 shading units and 11.52 TFLOPS of FP32 throughput, not a flagship, and the ranking reflects that. The gap between this combo and the top of the chart is substantial.
It is worth parsing what that ranking does and does not mean. The Core Ultra 9 290K Plus is elite silicon: 96th percentile among all CPUs, an average benchmark score of 84003, and multi-thread credentials like 51731 in Cinebench R23 multi-core and 60860 in PassMark multithread. The combo's game ranking is therefore a GPU story, not a system story. Swapping in a stronger graphics card with this same processor would climb the chart substantially; swapping in a stronger CPU alongside the B570 would change almost nothing, as the CPU role analysis above demonstrates. For players already targeting 1080p or 1440p, rank 2987 still translates into a genuinely playable experience — the benchmark data, not the rank, is what defines that.
The Verdict
Yes, this PC runs Overpower — at three of the four quality tiers tested, depending on resolution.
At 1920x1080, the verdict is the strongest: Low (110 FPS), Medium (69 FPS), and High (64 FPS) all clear 60 FPS, making High the recommended preset. Ultra at 53 FPS is the only 1080p failure.
At 2560x1440, the verdict is qualified: Low (98 FPS) and Medium (62 FPS) are playable, with Medium recommended; High (57 FPS) and Ultra (47 FPS) are not.
At 3840x2160, the verdict is narrow: only Low, at 84 FPS, clears the threshold. Medium (52 FPS), High (49 FPS), and Ultra (40 FPS) all fall short. Players wanting a 4K experience at higher detail will need more GPU than the Arc B570 provides; the CPU side of this system is already more than sufficient.
Best Settings per Resolution
- 1920x1080 — High, 64 FPS average. High is the most demanding preset that stays at or above the 60 FPS threshold at this resolution, edging past Medium's 69 FPS in visual quality while still clearing the line. Note that Ultra's 53 FPS does not qualify.
- 2560x1440 — Medium, 62 FPS average. Medium is the ceiling here; High drops to 57 FPS and fails the threshold. Medium's measured minimum of 52 FPS means dips below 60 will occur, but the average holds.
- 3840x2160 — Low, 84 FPS average. Low is the only 4K preset above the threshold, and it clears it by a wide margin — 24 frames of headroom over the playable line. Every preset above it at 4K averages 52 FPS or lower.
In short: 1080p High, 1440p Medium, 4K Low. Those three configurations are the exact points where the Arc B570 meets Overpower's 60 FPS bar, backed by a processor that never factors into the equation.