Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Overpower
Action 2023

Overpower

52%
Playable Your system meets minimum requirements.

Performance

1080p (Full HD)

Low 1080p Measured
65 FPS
Ultra 1080p Measured
31 FPS

1440p (2K / QHD)

Low 1440p Measured
58 FPS
Ultra 1440p Measured
28 FPS

4K (Ultra HD)

Low 4K Measured
49 FPS
Ultra 4K Measured
24 FPS
26.3ms Frame Time
39ms Input Latency
1440p Best Resolution

Requirements Check

Processor
Required 37,513
Your CPU 84,003
Graphics Card
Required 27,382
Your GPU 1,184

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 24 28 31 49
1440p QHD 28 34 36 58
1080p Full HD 31 38 41 65

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 38
1920x1080 Low 65
1920x1080 Medium 41
1920x1080 Ultra 31
2560x1440 High 34
2560x1440 Low 58
2560x1440 Medium 36
2560x1440 Ultra 28
3840x2160 High 28
3840x2160 Low 49
3840x2160 Medium 31
3840x2160 Ultra 24

Performance Analysis: Overpower on Your System

Measured FPS Breakdown

The recorded data for Overpower on this Intel Core Ultra 9 290K Plus and Intel Arc B370 configuration shows a system that is heavily constrained by the graphics processor. Across all three tested resolutions, the frame rates decline consistently as visual quality increases, and the gap between Low and Ultra presets is substantial.

At 1920x1080, the configuration delivers its strongest results. The Low preset produces an average of 65 FPS, which is the only recorded setting that clears the 60 FPS playable threshold. The High preset drops to 38 FPS average, a 27 FPS reduction from Low. Medium sits slightly above High at 41 FPS average, with recorded minimum and maximum values of 34 and 47 FPS respectively. The Ultra preset falls to 31 FPS average, which is less than half of the Low preset figure.

Moving to 2560x1440, every preset loses performance compared to the 1080p results. Low averages 58 FPS, just shy of the playable threshold. High averages 34 FPS, Medium averages 36 FPS with a minimum of 31 and a maximum of 42, while Ultra averages 28 FPS. The scaling from 1080p to 1440p at Low settings costs 7 FPS, while at Ultra settings the cost is only 3 FPS, indicating that the GPU is already saturated at lower resolutions.

At 3840x2160, the results are the weakest. Low averages 49 FPS, Medium averages 31 FPS with a minimum of 26 and a maximum of 35, High averages 28 FPS, and Ultra averages 24 FPS. No preset at 4K approaches the 60 FPS threshold. The delta between Low and Ultra at 4K is 25 FPS, which is consistent with the pattern seen at other resolutions.

The minimum and maximum frame data, available only for the Medium preset at each resolution, shows tight frame pacing. At 1080p Medium, the spread from minimum to maximum is 13 FPS. At 1440p Medium, the spread is 11 FPS. At 4K Medium, the spread is 9 FPS. These narrow ranges suggest the frame delivery is consistent even when the average is low.

Similar Performance Alternatives

The database places this CPU and GPU combination at rank 3427 out of 3713 tested configurations for Overpower, meaning it outperforms roughly 8 percent of recorded builds. The GPU percentile versus all GPUs is 5, which puts the Intel Arc B370 in the bottom tier of the benchmark database.

The nearest rivals for the Intel Arc B370 are all older discrete and mobile parts. The ATI Mobility Radeon HD 5570 scores 1186 in 3DMark Steel Nomad DX12, which is 0.2 percent higher than the Arc B370's 1184. The ATI Radeon HD 5770 scores 1190, a 0.5 percent advantage. The AMD Radeon HD 7650M scores 1192, a 0.7 percent lead. The AMD FirePro M2000 scores 1168, which is 1.4 percent behind the Arc B370. These delta percentages are all within a 2 percent band, meaning the Arc B370 performs essentially at the same level as these legacy parts in synthetic load testing.

The CPU side is far more competitive. The Intel Core Ultra 9 290K Plus sits at the 96th percentile versus all CPUs, with an average benchmark score of 84003. Its closest rival, the Intel Core Ultra 9 285K, scores 83807, a delta of only 0.2 percent. The AMD EPYC 4584PX scores 83090, which is 1.1 percent lower. The AMD EPYC 9135 scores 82980, a 1.2 percent deficit. The AMD EPYC 7F72 scores 85072, which is 1.3 percent higher than the 290K Plus. All four rivals fall within a 2.5 percent band around the 290K Plus score, indicating that the CPU is performing at the expected level for a high-end desktop processor.

The contrast is stark: the CPU is a top-tier part that sits near the 96th percentile, while the GPU is a bottom-tier part at the 5th percentile. The overall combo rank of 3427 reflects that the GPU dominates the gaming outcome for Overpower.

CPU and GPU Roles

The benchmark data for Overpower clearly shows that the Intel Arc B370 is the limiting component in this configuration. The CPU, an Intel Core Ultra 9 290K Plus with 24 cores and 24 threads, a boost clock of 5.80 GHz, and a R23 multi-core score of 51731, is not the bottleneck at any resolution or preset.

Evidence comes from the resolution scaling. When moving from 1920x1080 to 2560x1440, the Low preset drops from 65 FPS to 58 FPS, a decline of 10.8 percent. When moving from 1440p to 4K, the Low preset drops from 58 FPS to 49 FPS, a further 15.5 percent decline. This monotonic decrease with resolution is classic GPU-bound behavior. If the CPU were the limiting factor, the frame rate would remain flat across resolutions because the CPU workload per frame does not increase with pixel count.

The preset scaling reinforces this conclusion. At 1080p, the difference between Low and Ultra is 34 FPS. At 1440p, the difference is 30 FPS. At 4K, the difference is 25 FPS. The shrinking gap at higher resolutions indicates that the GPU is running out of raw throughput; the absolute frame rates are so low that even the preset changes have less impact.

The CPU's benchmark profile supports its role as a non-limiting component. The R20 multi-core score of 21727 and R15 multi-core score of 5214 place it among the fastest desktop chips in the database. The PassMark multithread score of 60860 and single-thread score of 4823 both confirm that computational headroom is available. The game simply does not require more CPU performance than this processor can deliver; the Arc B370 with 6.144 TFLOPS of FP32 throughput and 1280 shading units cannot keep up with the CPU's feeding rate.

At 4K Ultra, the configuration averages 24 FPS. This is not a CPU limitation; even the fastest processor in the database would produce a similar result with the same GPU. The data suggests that users seeking higher frame rates in Overpower should focus on the GPU as the primary upgrade path.

FAQ

Q: Can this PC run Overpower at 1080p?

A: Yes, but only at the Low preset. The recorded average at 1920x1080 Low is 65 FPS, which clears the 60 FPS playable threshold. The High preset averages 38 FPS, Medium averages 41 FPS, and Ultra averages 31 FPS, all below the threshold.

Q: What is the best resolution for this configuration in Overpower?

A: The only playable resolution is 1920x1080 with the Low preset, producing 65 FPS average. At 2560x1440, the best result is 58 FPS average on Low, which is below the 60 FPS threshold. At 3840x2160, no preset reaches even 50 FPS.

Q: How does the Intel Arc B370 compare to its nearest rivals?

A: The Arc B370 scores 1184 in 3DMark Steel Nomad DX12, placing it at the 5th percentile of all GPUs. Its closest rival, the ATI Mobility Radeon HD 5570, scores 1186, a 0.2 percent difference. The ATI Radeon HD 5770 scores 1190 and the AMD Radeon HD 7650M scores 1192, while the AMD FirePro M2000 scores 1168.

Q: Is the CPU or GPU the bottleneck in Overpower?

A: The GPU is the clear bottleneck. The Intel Core Ultra 9 290K Plus sits at the 96th CPU percentile with an average benchmark score of 84003, while the Arc B370 sits at the 5th GPU percentile. The frame rate drops consistently as resolution increases, which indicates the GPU is saturated.

Q: What frame rates can I expect at 1440p Medium settings?

A: The recorded data shows an average of 36 FPS at 2560x1440 Medium, with a minimum of 31 FPS and a maximum of 42 FPS. This is well below the 60 FPS playable threshold and may be noticeably choppy in action-heavy scenes.

Q: Does the 4K Ultra preset produce playable frame rates?

A: No. The 3840x2160 Ultra preset averages 24 FPS, which is less than half of the 60 FPS threshold. The best 4K result is 49 FPS average on Low, still below playable.

The Verdict

This PC cannot run Overpower at a consistently playable level for most settings. The verdict by resolution is clear: at 3840x2160, no settings are playable, and the best average is 49 FPS on Low. At 2560x1440, no settings are playable, with the best average at 58 FPS on Low. Only at 1920x1080 does the configuration find one playable preset: Low, with an average of 65 FPS.

The data shows that the Intel Arc B370 is the decisive factor. The GPU's 5th percentile ranking and its 3DMark Steel Nomad score of 1184, which is nearly identical to the ATI Mobility Radeon HD 5570, explain why the frame rates sit so low. The CPU, by contrast, is a top-tier part that does not constrain the game. The 24-core, 24-thread processor with a 5.80 GHz boost clock and a R23 multi-core score of 51731 provides far more compute headroom than the game requires.

For users who insist on playing Overpower with this hardware, the only viable path is 1080p with the Low preset. The 65 FPS average at those settings meets the 60 FPS threshold, but just barely. Any increase in resolution or preset quality will push the frame rate below the playable line. The 1440p Low result of 58 FPS is tantalizingly close but still short, and the 4K results are all far below acceptable.

The overall combo rank of 3427 out of 3713 configurations for Overpower places this build in the bottom 8 percent of tested systems. That ranking is consistent with the measured FPS data: this is a configuration for users who prioritize the CPU for non-gaming workloads, not for high-refresh-rate gaming.

Best Settings per Resolution

At 3840x2160, no preset achieves the 60 FPS threshold. The highest recorded average is 49 FPS on Low, which remains below playable. The verdict data lists no playable settings at this resolution.

At 2560x1440, the same situation applies. No preset reaches 60 FPS. The best result is 58 FPS average on Low, which falls 2 FPS short. The verdict data confirms no playable settings at 1440p.

At 1920x1080, the Low preset is the only playable option, with an average of 65 FPS. The verdict data identifies this as the best settings choice, with Low being the most demanding preset that stays at or above 60 FPS. The High, Medium, and Ultra presets all fail to reach the threshold, with averages of 38, 41, and 31 FPS respectively.

The recommendation is straightforward: run Overpower at 1920x1080 with the Low preset. This delivers 65 FPS average, which is 5 FPS above the playable threshold. There is no headroom for higher settings at this resolution, and no alternative resolution provides a playable experience. The Medium preset at 1080p, with its 41 FPS average and 34 FPS minimum, would be a significant compromise in smoothness. Users who require higher visual quality will need to consider a different GPU, as the Arc B370 cannot deliver playable frame rates at any setting above Low at 1080p.