Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Overpower
Action 2023

Overpower

52%
Playable Your system meets minimum requirements.

Performance

1080p (Full HD)

Low 1080p Measured
72 FPS
Ultra 1080p Measured
35 FPS

1440p (2K / QHD)

Low 1440p Measured
64 FPS
Ultra 1440p Measured
31 FPS

4K (Ultra HD)

Low 4K Measured
54 FPS
Ultra 4K Measured
26 FPS
23.8ms Frame Time
36ms Input Latency
1440p Best Resolution

Requirements Check

Processor
Required 37,513
Your CPU 64,640
Graphics Card
Required 27,382
Your GPU 1,482

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 26 32 34 54
1440p QHD 31 37 40 64
1080p Full HD 35 42 45 72

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 42
1920x1080 Low 72
1920x1080 Medium 45
1920x1080 Ultra 35
2560x1440 High 37
2560x1440 Low 64
2560x1440 Medium 40
2560x1440 Ultra 31
3840x2160 High 32
3840x2160 Low 54
3840x2160 Medium 34
3840x2160 Ultra 26

Performance Analysis: Overpower on Your System

# FAQ

Q: What is the minimum resolution at which this PC can run Overpower at 60 FPS or higher?

A: According to the recorded data, the system reaches playable performance at 2560x1440 with Low settings, where it averages 64 FPS. At 1920x1080 with Low settings, it averages 72 FPS, which is the highest recorded average for this combination.

Q: Can this system run Overpower at 4K resolution?

A: No. The measured results at 3840x2160 show no playable settings. The best average at 4K is 54 FPS on Low settings, which falls below the 60 FPS playable threshold. High, Medium, and Ultra presets all average below 35 FPS at this resolution.

Q: Which component is more limiting for Overpower performance?

A: The GPU is the primary bottleneck. The Intel Arc B390 sits in the 9th percentile among all tested GPUs and delivers a 3DMark Steel Nomad DX12 score of 1482. The CPU, by contrast, ranks in the 93rd percentile among all tested processors. The performance gap between the two components is substantial, and benchmark results confirm the graphics solution holds back frame rates.

Q: How does the Intel Arc B390 compare to its nearest GPU rivals?

A: The Arc B390's average benchmark score of 1482 places it just 1.3% ahead of the NVIDIA GeForce GT 520MX (1463), 1.5% ahead of the GeForce 800M (1460), 2.5% ahead of the GT 625 OEM (1446), and 2.7% ahead of the GT 710 (1443). These are all very close scores, indicating the Arc B390 performs in the same tier as those entry-level graphics solutions.

Q: What is the best playable preset at 1440p?

A: Low settings at 2560x1440 is the only playable option, producing an average of 64 FPS. Medium drops to 40 FPS, High to 37 FPS, and Ultra to 31 FPS, none of which reach the 60 FPS threshold.

Q: Does raising the resolution from 1080p to 1440p have a large impact on Low preset performance?

A: Yes. At 1920x1080 with Low settings, the system averages 72 FPS. Moving to 2560x1440 with Low settings reduces the average to 64 FPS, a drop of 8 FPS. At 3840x2160 with Low settings, performance falls further to 54 FPS, which is below the playable threshold.

CPU and GPU Roles

The benchmark data for Overpower reveals a clear division of labor between the Intel Core Ultra 7 265 and the Intel Arc B390. The CPU is a high-end desktop processor with 20 cores and 20 threads, boosting up to 5.30 GHz, and it ranks in the 93rd percentile among all CPUs tested. The GPU, however, is an integrated graphics solution based on the Xe3-LPG architecture, ranking in only the 9th percentile among all GPUs. This massive discrepancy in relative performance dictates how the system behaves across resolutions and presets.

At every resolution tested, the GPU is the limiting factor. The Arc B390's 3DMark Steel Nomad DX12 score of 1482 places it in the same performance class as mobile and OEM graphics parts from over a decade ago. The CPU's available headroom is not the issue; rather, the graphics pipeline cannot sustain high frame rates even at lower settings.

Resolution scaling demonstrates this bottleneck clearly. At 1920x1080 with Low settings, the system averages 72 FPS. When resolution increases to 2560x1440, the average falls to 64 FPS, an 11% reduction. At 3840x2160, the average drops to 54 FPS, a 25% reduction from 1080p. These scaling losses align with what would be expected from a GPU that is already near its limits at 1080p.

Preset scaling further confirms the GPU constraint. At 1080p, moving from Low to Medium reduces the average from 72 FPS to 45 FPS, a 37.5% drop. Moving from Medium to High reduces it further to 42 FPS, and Ultra drops to 35 FPS. The pattern repeats at 1440p: Low averages 64 FPS, Medium drops to 40 FPS, High to 37 FPS, and Ultra to 31 FPS. At 4K, Low averages 54 FPS, Medium 34 FPS, High 32 FPS, and Ultra 26 FPS.

The CPU's role becomes more apparent when considering that the Core Ultra 7 265 can handle the game's logic and physics without issue. Its Cinebench R23 multi-core score of 42216 and single-core score of 5960 indicate strong processing capability. The PassMark single-thread score of 4689 and multithread score of 49682 reinforce this. None of the frame rate collapses can be attributed to CPU limitations; the data consistently points to the Arc B390 as the performance ceiling.

In practical terms, the CPU is never the deciding factor in whether a given preset is playable. The GPU determines the outcome at every resolution. Users looking to improve performance would need to reduce graphics load, since the processor has ample headroom to handle any of the tested presets.

Best Settings per Resolution

The playable threshold for Overpower is defined as 60 FPS average. Based on the measured data, the system can only cross this threshold at two resolutions, and only with the lowest graphics preset.

At 1920x1080, the best playable setting is Low, which delivers an average of 72 FPS. This is the only preset at 1080p that clears 60 FPS. Medium averages 45 FPS, High averages 42 FPS, and Ultra averages 35 FPS, all falling short of the playable mark.

At 2560x1440, the best playable setting is also Low, producing an average of 64 FPS. Medium drops to 40 FPS, High to 37 FPS, and Ultra to 31 FPS. While 64 FPS clears the threshold, the margin is narrower than at 1080p, leaving less headroom for demanding scenes.

At 3840x2160, there is no playable setting. The closest result is Low at 54 FPS, which misses the 60 FPS threshold by 6 FPS. Medium averages 34 FPS, High 32 FPS, and Ultra 26 FPS. The system cannot maintain 60 FPS at 4K under any tested quality level.

For users prioritizing smooth gameplay, Low settings at 1080p is the recommended configuration, offering the highest average frame rate of 72 FPS. Those who prefer 1440p can still achieve playable performance with Low settings at 64 FPS, but should expect occasional dips below the average during intense action sequences.

The Verdict

The question of whether this PC can run Overpower has a qualified answer. Based on the verdict data, the system achieves playable performance at two resolutions, but only with the lowest preset.

At 1920x1080, the system runs the game with Low settings at an average of 72 FPS, comfortably above the 60 FPS playable threshold. This is the most reliable configuration for smooth gameplay.

At 2560x1440, Low settings produce an average of 64 FPS, which clears the threshold but with less margin. The system is technically playable at this resolution, though frame rates will vary more noticeably.

At 3840x2160, the system fails to reach playable performance under any setting. Even Low settings only average 54 FPS, and all other presets fall well below 60 FPS.

The verdict is clear: this PC can run Overpower, but only at 1080p and 1440p with Low settings. Higher quality presets at any resolution result in sub-60 FPS averages. The GPU's low benchmark standing, in the 9th percentile, explains this limitation. The CPU, by contrast, is more than capable, ranking in the 93rd percentile. The combination is heavily unbalanced toward the processor, and the graphics solution is the deciding factor in playability.

Measured FPS Breakdown

The following data represents the complete set of measured frame rates for this system across all tested resolutions and presets.

1920x1080:

  • Low: average 72 FPS
  • Medium: average 45 FPS, minimum 38 FPS, maximum 52 FPS
  • High: average 42 FPS
  • Ultra: average 35 FPS

2560x1440:

  • Low: average 64 FPS
  • Medium: average 40 FPS, minimum 34 FPS, maximum 46 FPS
  • High: average 37 FPS
  • Ultra: average 31 FPS

3840x2160:

  • Low: average 54 FPS
  • Medium: average 34 FPS, minimum 29 FPS, maximum 39 FPS
  • High: average 32 FPS
  • Ultra: average 26 FPS

The Medium preset is the only setting for which minimum and maximum frame rates were recorded. At 1080p Medium, the system ranges from 38 to 52 FPS, a 14 FPS spread. At 1440p Medium, the range is 34 to 46 FPS, a 12 FPS spread. At 4K Medium, the range is 29 to 39 FPS, a 10 FPS spread. These ranges indicate moderate frame time variance, with no severe stuttering evident in the data.

The scaling pattern across resolutions is consistent. For each preset, performance decreases as resolution increases. The Low preset shows the smallest relative drop between 1080p and 1440p (from 72 to 64 FPS), while the Medium preset drops from 45 to 40 FPS over the same interval. At 4K, the Low preset's 54 FPS average represents the best possible result at that resolution, but it still misses the playable threshold.

How This Combo Ranks

In the database of tested combinations for Overpower, this system ranks 3301 out of 3713 total combinations. This places it in the lower 11% of all tested systems, reflecting the GPU's limited capabilities.

The ranking is consistent with the component-level benchmark data. The Intel Core Ultra 7 265 performs well relative to other CPUs, with an average benchmark score of 64640 and a 93rd percentile standing. Its nearest rivals include the AMD EPYC 4464P (64823, 0.3% higher), the Intel Core Ultra 7 265F (64438, 0.3% lower), the AMD EPYC 7343 (64202, 0.7% lower), and the AMD EPYC 9124 (65104, 0.7% higher). These are all very close scores, indicating the CPU is competitive with high-end server and desktop processors.

The Intel Arc B390, however, drags the combination down significantly. Its average benchmark score of 1482 places it in the 9th percentile, with nearest rivals being the NVIDIA GeForce GT 520MX (1463, 1.3% lower), GeForce 800M (1460, 1.5% lower), GT 625 OEM (1446, 2.5% lower), and GT 710 (1443, 2.7% lower). These are all entry-level or legacy parts, and the Arc B390 barely outperforms them.

The combination's rank of 3301 out of 3713 reflects this imbalance. While the CPU provides ample processing power, the GPU cannot translate that into high frame rates in Overpower. The system lands near the bottom of the tested combinations, and the measured FPS data confirms that only Low settings at 1080p and 1440p achieve playable performance. Users seeking higher quality presets or 4K gameplay would need a significantly more powerful graphics solution.