Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Overpower
Action 2023

Overpower

52%
Playable Your system meets minimum requirements.

Performance

1080p (Full HD)

Low 1080p Measured
65 FPS
Ultra 1080p Measured
31 FPS

1440p (2K / QHD)

Low 1440p Measured
58 FPS
Ultra 1440p Measured
28 FPS

4K (Ultra HD)

Low 4K Measured
49 FPS
Ultra 4K Measured
24 FPS
26.3ms Frame Time
39ms Input Latency
1440p Best Resolution

Requirements Check

Processor
Required 37,513
Your CPU 64,640
Graphics Card
Required 27,382
Your GPU 1,184

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 24 28 31 49
1440p QHD 28 34 36 58
1080p Full HD 31 38 41 65

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 38
1920x1080 Low 65
1920x1080 Medium 41
1920x1080 Ultra 31
2560x1440 High 34
2560x1440 Low 58
2560x1440 Medium 36
2560x1440 Ultra 28
3840x2160 High 28
3840x2160 Low 49
3840x2160 Medium 31
3840x2160 Ultra 24

Performance Analysis: Overpower on Your System

Intel Core Ultra 7 265 and Intel Arc B370, as a paired system, deliver a very narrow band of playable performance in Overpower. The recorded data shows that this combination only crosses the 60 FPS threshold at 1080p with the Low preset, while every other resolution and preset combination falls short of that mark. This is a configuration where the integrated graphics solution is the clear limiting factor, and the CPU’s substantial compute headroom cannot compensate for the GPU’s modest output.

Similar Performance Alternatives

The nearest rivals for the Intel Core Ultra 7 265 place it in a tightly contested performance tier. The AMD EPYC 4464P sits marginally ahead with an average score of 64823, which is 0.3% higher than the Core Ultra 7 265’s average of 64640. The Intel Core Ultra 7 265F is effectively a twin, scoring 64438, a 0.3% deficit. The AMD EPYC 9124 is 0.7% behind, with a score of 64202, while the AMD EPYC 7343 posts 65104, which is 0.7% ahead. These deltas are all within a single percentage point, meaning that in CPU-bound scenarios, swapping among these parts would produce nearly identical frame pacing and physics simulation results in Overpower.

The GPU side tells a different story. The Intel Arc B370, with an average benchmark score of 1184, sits at the 5th percentile among all tested GPUs. Its nearest rivals are all legacy or low-power parts: the ATI Mobility Radeon HD 5570 scores 1186 (0.2% ahead), the ATI Radeon HD 5770 scores 1190 (0.5% ahead), the AMD Radeon HD 7650M scores 1192 (0.7% ahead), and the AMD FirePro M2000 scores 1168 (1.4% behind). The implication for Overpower is straightforward: the Arc B370’s rendering throughput is comparable to a generation of GPUs that predate modern action-game requirements. Users coming from any of those older parts would see similar frame rates, and the modern CPU attached to this iGPU does not alter that outcome.

CPU and GPU Roles

In this pairing, the GPU is the dominant constraint at every resolution tested. The CPU is a high-end desktop part with a 93rd percentile ranking among all CPUs, but the Arc B370’s 5th percentile GPU ranking means the rendering pipeline is saturated long before the processor is stressed.

The scaling data reveals how heavily the GPU limits performance. At 1080p, moving from Low to Medium drops the average frame rate from 65 FPS to 41 FPS, a 24 FPS penalty. Going from Medium to High reduces it further to 38 FPS, and Ultra falls to 31 FPS. At 1440p, the same preset ladder yields 58 FPS at Low, 36 FPS at Medium, 34 FPS at High, and 28 FPS at Ultra. At 4K, the numbers compress further: 49 FPS at Low, 31 FPS at Medium, 28 FPS at High, and 24 FPS at Ultra.

Resolution scaling shows a consistent pattern. At Low settings, dropping from 4K to 1080p raises the average from 49 FPS to 65 FPS, a 16 FPS improvement. At Medium, the same resolution drop improves from 31 FPS to 41 FPS. At High, the improvement is from 28 FPS to 38 FPS. At Ultra, it goes from 24 FPS to 31 FPS. The fact that even at 1080p Ultra the system only reaches 31 FPS indicates that the GPU’s raw pixel throughput is exhausted regardless of resolution. The CPU’s role is essentially passive: it provides enough headroom to avoid bottlenecking, but it cannot push the frame rate higher once the GPU is at its limit.

The presence of a 20-core, 20-thread Arrow Lake processor with a 5.30 GHz boost clock and 30 MB of L3 cache is irrelevant to the outcome in Overpower at these settings. The measured frame rates are entirely consistent with a GPU-bound scenario, where the Arc B370’s 6.144 TFLOPS FP32 throughput and 20 ROPs govern the final image presentation.

FAQ

Q: Can this system run Overpower at 4K?

A: No. The recorded data shows no playable settings at 3840x2160. The highest average frame rate at 4K is 49 FPS on Low, which is below the 60 FPS playable threshold. Medium, High, and Ultra produce 31, 28, and 24 FPS respectively.

Q: What is the best playable setting at 1080p?

A: The only playable configuration is 1920x1080 with the Low preset, which averages 65 FPS. Medium drops to 41 FPS, High to 38 FPS, and Ultra to 31 FPS, all below the threshold.

Q: How does the CPU compare to its nearest rivals?

A: The Intel Core Ultra 7 265 has an average benchmark score of 64640. The AMD EPYC 4464P is 0.3% faster at 64823, and the AMD EPYC 9124 is 0.7% slower at 64202. The Intel Core Ultra 7 265F is 0.3% slower at 64438, and the AMD EPYC 7343 is 0.7% faster at 65104.

Q: Is the Arc B370 competitive with other GPUs in the database?

A: No. It ranks at the 5th percentile among all GPUs. Its nearest rival, the ATI Mobility Radeon HD 5570, scores 1186, which is 0.2% higher. The ATI Radeon HD 5770 scores 1190 (0.5% higher), and the AMD Radeon HD 7650M scores 1192 (0.7% higher). Only the AMD FirePro M2000 is slower, at 1168 (1.4% lower).

Q: Does lowering the resolution to 1440p make the game playable?

A: No. At 2560x1440, the highest average is 58 FPS on Low, which misses the 60 FPS threshold. Medium runs at 36 FPS, High at 34 FPS, and Ultra at 28 FPS.

Q: What frame rates can be expected at Medium settings across resolutions?

A: At 1080p Medium, the average is 41 FPS with a minimum of 34 FPS and a maximum of 47 FPS. At 1440p Medium, the average is 36 FPS with a minimum of 31 FPS and a maximum of 42 FPS. At 4K Medium, the average is 31 FPS with a minimum of 26 FPS and a maximum of 35 FPS.

The Verdict

This PC cannot run Overpower at a consistently playable level for most configurations. The verdict by resolution is clear: at 3840x2160, there are no playable settings; at 2560x1440, there are also no playable settings. Only at 1920x1080 does the system find a single playable preset, and that is Low, which achieves an average of 65 FPS.

The gap between the playable configuration and the next step down is large. At 1080p Medium, the frame rate collapses to 41 FPS, which is 19 FPS below the playable threshold. At 1440p Low, the system reaches 58 FPS, which is tantalizingly close to 60 FPS but still misses it. At 4K Low, the average drops to 49 FPS. The data indicates that this system is suitable only for players willing to accept 1080p Low as their sole playable option, and even then, the margin above the threshold is a slim 5 FPS.

Best Settings per Resolution

At 3840x2160, no preset reaches 60 FPS, so there is no recommended setting. The closest option is Low at 49 FPS, but it remains below the playable threshold.

At 2560x1440, no preset reaches 60 FPS. Low is the best performer at 58 FPS, but it still falls short.

At 1920x1080, the best settings are Low, which delivers an average of 65 FPS. This is the only resolution and preset combination in the entire dataset that clears the 60 FPS playable threshold. Medium at 1080p produces 41 FPS, High produces 38 FPS, and Ultra produces 31 FPS, all of which are unplayable by the database’s standard.

How This Combo Ranks

In the database’s overall rankings for Overpower, this combination of Intel Core Ultra 7 265 and Intel Arc B370 ranks 3427 out of 3713 tested combos. That places it in the bottom 8% of all configurations tested for this game. The rank reflects the GPU’s severe limitation: a 5th percentile graphics solution paired with a 93rd percentile processor does not produce a balanced system for an action title like Overpower. The CPU’s high compute scores are effectively neutralized, and the final outcome is determined almost entirely by the Arc B370’s modest 6.144 TFLOPS of FP32 throughput and its 25 W TDP, which is characteristic of an integrated graphics part rather than a discrete gaming solution. Players seeking higher frame rates in Overpower would need to look at configurations with a more capable discrete GPU, as this CPU-GPU pairing leaves no headroom for higher presets or resolutions.