Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Overpower
Action 2023

Overpower

84%
Great Match Your system meets recommended requirements.

Performance

1080p (Full HD)

Low 1080p Measured
110 FPS
Ultra 1080p Measured
53 FPS

1440p (2K / QHD)

Low 1440p Measured
98 FPS
Ultra 1440p Measured
47 FPS

4K (Ultra HD)

Low 4K Measured
84 FPS
Ultra 4K Measured
40 FPS
15.6ms Frame Time
23ms Input Latency
4K Best Resolution

Requirements Check

Processor
Required 37,513
Your CPU 48,995
Graphics Card
Required 27,382
Your GPU 20,556

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 40 49 52 84
1440p QHD 47 57 62 98
1080p Full HD 53 64 69 110

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 64
1920x1080 Low 110
1920x1080 Medium 69
1920x1080 Ultra 53
2560x1440 High 57
2560x1440 Low 98
2560x1440 Medium 62
2560x1440 Ultra 47
3840x2160 High 49
3840x2160 Low 84
3840x2160 Medium 52
3840x2160 Ultra 40

Performance Analysis: Overpower on Your System

The Intel Core Ultra 5 245 and Intel Arc B570 combination lands in the 2987th position out of 3713 tested combos for Overpower, placing it in the lower third of the overall performance distribution. The data shows this pairing clears the 60 FPS playable threshold at 1080p and 1440p, but only at specific settings, with 4K requiring a significant compromise to remain fluid.

How This Combo Ranks

At rank 2987 out of 3713 combos, this system sits in the 80.4th percentile of all tested configurations, meaning roughly one in five setups performs worse. The CPU contributes strongly to this standing, as the Core Ultra 5 245 holds a 90th percentile ranking among all processors, while the Arc B570 GPU sits at the 65th percentile among graphics cards. The disparity between those two percentile scores suggests the GPU is the limiting factor in most scenarios.

The combination’s overall position reflects what the individual component benchmarks predict: a capable mid-range CPU paired with an entry-level graphics card. The Core Ultra 5 245’s average benchmark score of 48995 places it within 1% of several close rivals, showing that processor performance is competitive with other mainstream options. However, the Arc B570’s average score of 20556 lands it in a cluster with mobile and older desktop parts, indicating that graphics throughput will constrain frame rates more than CPU capability in this pairing.

Within Overpower specifically, the measured frame rates confirm this bottleneck dynamic. The system achieves its highest average FPS of 110 at 1080p Low, but drops to 53 at 1080p Ultra—a 51% reduction driven almost entirely by GPU workload increases. At 4K, the spread widens further, from 84 FPS at Low to 40 FPS at Ultra, a 52% performance swing that the CPU alone cannot compensate for.

Best Settings per Resolution

At 3840x2160, the only settings that maintain an average above 60 FPS are Low, which delivers 84 FPS. Medium drops to 52 FPS average with minimums of 44 and maximums of 60, while High produces 49 FPS and Ultra falls to 40 FPS. The verdict data confirms Low as the best playable setting at this resolution.

For 2560x1440, Medium is the highest preset that stays playable, averaging 62 FPS with a minimum of 52 and maximum of 71. Low runs at 98 FPS, but High dips to 57 FPS and Ultra to 47 FPS, both below the 60 FPS threshold. The system has more headroom at this resolution, but the jump from Medium to High costs 5 FPS on average, pushing it under the playable line.

At 1920x1080, High is the best playable setting, averaging 64 FPS. Medium runs at 69 FPS, Low at 110 FPS, and Ultra drops to 53 FPS. Notably, the difference between Medium and High at 1080p is just 5 FPS, while High to Ultra costs 11 FPS, suggesting that the Ultra preset introduces effects that disproportionately tax the Arc B570’s 10 GB memory buffer and 160-bit bus.

CPU and GPU Roles

The benchmark data reveals a clear shift in component responsibility as resolution increases. At 1080p, the Core Ultra 5 245 has enough headroom to keep frame rates CPU-bound at lower presets, evidenced by the 110 FPS Low result. The gap between Low and Ultra at 1080p is 57 FPS, which indicates the GPU becomes the primary constraint as settings rise.

Moving to 1440p, the scaling pattern changes. Low runs at 98 FPS, but Medium drops to 62 FPS—a 36 FPS reduction for one preset step. This steep decline suggests the Arc B570’s memory bandwidth (380.0 GB/s) starts to become a limiting factor at this resolution. The CPU’s 102.4 GB/s memory bandwidth and 14 cores are sufficient for the workload, but the GPU’s 10 GB GDDR6 buffer fills quickly with higher-quality textures.

At 4K, the GPU’s role dominates almost completely. The system goes from 84 FPS at Low to 52 FPS at Medium, a 32 FPS drop, then to 49 FPS at High and 40 FPS at Ultra. The CPU’s performance remains consistent across these tests because the frame rate ceiling is now firmly set by the GPU’s pixel rate of 200.0 GPixel/s and texture rate of 360.0 GTexel/s. The Core Ultra 5 245’s multi-threaded capabilities (32924 in Cinebench R23) are never fully exercised in this scenario.

The data shows that at 1080p, the CPU can push frame rates higher when the GPU has lighter work, but at 1440p and above, the Arc B570’s throughput determines playability. Users with this combo should prioritize GPU settings over CPU-intensive options at higher resolutions.

Similar Performance Alternatives

Looking at the CPU’s nearest rivals, the AMD Ryzen 7 PRO 5755G scores 49196, a 0.4% difference from the Core Ultra 5 245’s 48995. The AMD Ryzen 9 7900 scores 49228, 0.5% higher. The Intel Xeon Gold 5318H is 0.6% lower at 48698, and the Intel Core i5-14600K scores 48618, 0.8% below. These four processors would produce nearly identical CPU-bound performance in Overpower, meaning any swap would not change the playable settings at each resolution.

For the GPU, the NVIDIA GeForce RTX 3070 Mobile scores 20534, just 0.1% above the Arc B570’s 20556. The Intel Arc A750 scores 20582, 0.1% higher, while the NVIDIA Quadro M4000M is 0.4% lower at 20480 and the AMD Radeon R9 M390X is 0.5% lower at 20662. These four GPUs sit within a 1% performance band, so the frame rates measured for the Arc B570 would apply almost identically to any of them. The RTX 3070 Mobile is a laptop part, so it would require different system integration, but its raw score suggests similar 1080p and 1440p results.

The practical implication is that this combo’s performance profile is not unique. A system with any of these CPUs paired with any of these GPUs would deliver the same 60 FPS outcomes at 1080p High, 1440p Medium, and 4K Low. The DeltaPct values are all under 1%, which is within testing variance for most games.

FAQ

*Q: Can this PC run Overpower at 60 FPS on a 4K monitor?*

A: Only at Low settings, which averages 84 FPS. Medium drops to 52 FPS, High to 49 FPS, and Ultra to 40 FPS, so 4K requires the lowest preset to stay above the 60 FPS threshold.

Q: What is the best settings preset for 1440p gaming?

A: Medium is the highest playable preset at 2560x1440, averaging 62 FPS with a minimum of 52 FPS. Low runs at 98 FPS, but High falls to 57 FPS and Ultra to 47 FPS.

Q: How does the Intel Arc B570 compare to the Arc A750?

A: The Arc B570 scores 20556 in average benchmarks, while the Arc A750 scores 20582, making the A750 0.1% faster. In Overpower, this difference would be negligible, with both GPUs producing nearly identical frame rates.

Q: Is the Core Ultra 5 245 a bottleneck for this game?

A: At 1080p, the CPU is not a bottleneck at lower presets, as evidenced by 110 FPS at Low settings. However, at 1440p and 4K, the GPU becomes the limiting factor, so the CPU’s performance headroom is not fully utilized.

Q: What frame rate can I expect at 1080p Ultra settings?

A: The system averages 53 FPS at 1920x1080 Ultra, which is below the 60 FPS playable threshold. High settings are required for 60 FPS at 1080p, averaging 64 FPS.

Q: How does this combo rank against all tested systems?

A: It ranks 2987th out of 3713 tested combos, placing it in the lower third of configurations. The CPU is in the 90th percentile, while the GPU is in the 65th percentile, indicating the graphics card holds back overall performance.

The Verdict

This system can run Overpower at 60 FPS, but the resolution and preset options are limited. At 1920x1080, High settings deliver 64 FPS, Medium runs at 69 FPS, and Low hits 110 FPS—all above the threshold, with Ultra falling short at 53 FPS. For 2560x1440, Medium is the best playable option at 62 FPS, while Low runs at 98 FPS; High and Ultra both miss the mark. At 3840x2160, only Low achieves playability with 84 FPS, as Medium, High, and Ultra all stay below 60 FPS.

The verdict data confirms these findings: 1080p supports High, 1440p supports Medium, and 4K supports Low as the highest playable settings. The Core Ultra 5 245 provides ample CPU performance, but the Arc B570’s 65th percentile ranking limits higher-fidelity options. For users targeting 1080p or 1440p gaming, this combo delivers smooth performance with reasonable visual quality. For 4K, the system requires significant settings compromises, making it a marginal choice for ultra-high-definition play. Overall, the combo is well-suited for 1080p and acceptable for 1440p, but it is not a 4K gaming solution.