Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Overpower
Action 2023

Overpower

52%
Playable Your system meets minimum requirements.

Performance

1080p (Full HD)

Low 1080p Measured
65 FPS
Ultra 1080p Measured
31 FPS

1440p (2K / QHD)

Low 1440p Measured
58 FPS
Ultra 1440p Measured
28 FPS

4K (Ultra HD)

Low 4K Measured
49 FPS
Ultra 4K Measured
24 FPS
26.3ms Frame Time
39ms Input Latency
1440p Best Resolution

Requirements Check

Processor
Required 37,513
Your CPU 48,995
Graphics Card
Required 27,382
Your GPU 1,184

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 24 28 31 49
1440p QHD 28 34 36 58
1080p Full HD 31 38 41 65

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 38
1920x1080 Low 65
1920x1080 Medium 41
1920x1080 Ultra 31
2560x1440 High 34
2560x1440 Low 58
2560x1440 Medium 36
2560x1440 Ultra 28
3840x2160 High 28
3840x2160 Low 49
3840x2160 Medium 31
3840x2160 Ultra 24

Performance Analysis: Overpower on Your System

Measured FPS Breakdown

The recorded data for Overpower with the Intel Core Ultra 5 245 and Intel Arc B370 shows a clear pattern: playable frame rates are only achieved at the lowest settings on 1080p, while higher resolutions and presets fall short of the 60 FPS threshold. The GPU, with a 3DMark Steel Nomad DX12 score of 1184 and a 5th percentile ranking among all GPUs, is the dominant limiting factor, as evidenced by the steep FPS drops when resolution and settings are increased.

At 3840x2160 (4K), the results are consistently below playability. At High settings, the average FPS is 28. Dropping to Medium yields an average of 31 FPS, with a minimum of 26 and a maximum of 35. Low settings improve the average to 49 FPS, but this still falls well short of the 60 FPS target. Ultra settings are the most demanding, producing an average of just 24 FPS. No preset at this resolution reaches the playable threshold.

At 2560x1440 (1440p), the situation improves slightly but remains unplayable across the board. High settings deliver an average of 34 FPS. Medium settings produce an average of 36 FPS, with a recorded range of 31 to 42 FPS. Low settings push the average to 58 FPS, which is close to but still below the 60 FPS threshold. Ultra settings average only 28 FPS. The data shows that even at the lowest quality settings, 1440p cannot maintain a consistent 60 FPS.

At 1920x1080 (1080p), the results finally show one playable configuration. Low settings achieve an average of 65 FPS, clearing the 60 FPS bar. High settings average 38 FPS, while Medium settings average 41 FPS with a range of 34 to 47 FPS. Ultra settings average 31 FPS. The gap between Low and Medium settings, a jump of 24 FPS, indicates that the GPU struggles significantly with the additional load. The difference between High and Ultra is smaller, at 7 FPS, suggesting diminishing returns at the top end of the settings range.

Across all resolutions, the scaling is consistent: Low settings are dramatically faster than Medium, while the jump from High to Ultra yields a smaller absolute FPS loss. This behavior points to a GPU that is severely bottlenecked by shader and texture work, rather than by raw fill rate or memory bandwidth, given the system-shared memory configuration.

FAQ

Q: What is the best playable setting for this PC at 1080p?

A: The only setting that clears the 60 FPS threshold is Low, with an average of 65 FPS. All other presets at 1080p, including Medium at 41 FPS, High at 38 FPS, and Ultra at 31 FPS, fail to reach the playable threshold.

Q: Can this system run Overpower at 1440p?

A: No. The best result at 2560x1440 is 58 FPS on Low settings, which is below the 60 FPS playable threshold. Medium, High, and Ultra presets all average below 40 FPS.

Q: How does the Intel Arc B370 compare to similar GPUs?

A: The GPU's average benchmark score is 1184. Its nearest rivals are the ATI Mobility Radeon HD 5570 with a score of 1186 (0.2% slower), the ATI Radeon HD 5770 with a score of 1190 (0.5% slower), the AMD Radeon HD 7650M with a score of 1192 (0.7% slower), and the AMD FirePro M2000 with a score of 1168 (1.4% faster). The Arc B370 sits in the bottom 5% of all GPUs.

Q: What is the frame rate range on Medium settings at 1080p?

A: On Medium settings at 1920x1080, the measured average FPS is 41, with a minimum of 34 and a maximum of 47. This range shows significant frame pacing variance, making it feel less stable than the average suggests.

Q: How does the CPU's performance compare to its nearest rivals?

A: The Intel Core Ultra 5 245 has an average benchmark score of 48995, placing it in the 90th percentile of all CPUs. Its closest competitors are the AMD Ryzen 7 PRO 5755G at 49196 (0.4% higher), the AMD Ryzen 9 7900 at 49228 (0.5% higher), the Intel Xeon Gold 5318H at 48698 (0.6% lower), and the Intel Core i5-14600K at 48618 (0.8% lower).

Q: Is there any resolution where Ultra settings are playable?

A: No. At every resolution tested, Ultra settings produce average frame rates well below 60 FPS: 31 FPS at 1080p, 28 FPS at 1440p, and 24 FPS at 4K.

Best Settings per Resolution

For 1920x1080, the most demanding preset that maintains an average of at least 60 FPS is Low, with a recorded average of 65 FPS. This is the only configuration across all resolutions and settings that meets the playable threshold.

For 2560x1440, no preset achieves the 60 FPS target. The closest is Low settings with an average of 58 FPS, which narrowly misses the mark. Medium, High, and Ultra all fall further behind, with averages of 36, 34, and 28 FPS respectively.

For 3840x2160, no preset achieves the 60 FPS target either. Low settings provide the highest average at 49 FPS, followed by Medium at 31 FPS, High at 28 FPS, and Ultra at 24 FPS. The data indicates that even the lowest quality settings at 4K are too demanding for this combination of hardware.

Similar Performance Alternatives

Based on the nearest rivals in the database, the CPU and GPU each have close performance counterparts that would likely produce very similar frame rates in Overpower.

For the Intel Core Ultra 5 245, the benchmark data shows it is virtually tied with several other processors. The AMD Ryzen 7 PRO 5755G scores 49196, which is 0.4% higher, and the AMD Ryzen 9 7900 scores 49228, which is 0.5% higher. On the other side, the Intel Xeon Gold 5318H scores 48698, 0.6% lower, and the Intel Core i5-14600K scores 48618, 0.8% lower. In a game like Overpower, where the GPU is clearly the bottleneck, these small CPU differences would likely be imperceptible. The CPU, with its 90th percentile ranking, is not the limiting factor.

For the Intel Arc B370, the nearest GPU rivals are all significantly older parts with similar scores. The ATI Mobility Radeon HD 5570 scores 1186, just 0.2% above the Arc B370's 1184. The ATI Radeon HD 5770 scores 1190, 0.5% higher, and the AMD Radeon HD 7650M scores 1192, 0.7% higher. The AMD FirePro M2000 scores 1168, which is 1.4% lower. These alternatives would behave almost identically in Overpower, meaning they would also struggle to exceed 60 FPS at 1080p on Low settings and would fail at higher presets or resolutions. The Arc B370's 5th percentile ranking underscores how far behind modern discrete GPUs it sits.

CPU and GPU Roles

The benchmark results make it clear that the GPU is the decisive component in this pairing for Overpower. The Intel Core Ultra 5 245 is a strong processor, ranking in the 90th percentile of all CPUs, with a Cinebench R23 multi-core score of 32924 and a single-core score of 4648. Its PassMark single-thread score of 4394 reinforces that it has ample processing power for gaming workloads. The CPU is not holding back performance.

The Intel Arc B370, however, is an integrated graphics solution with a 25 W TDP and system-shared memory. Its 3DMark Steel Nomad DX12 score of 1184 places it in the 5th percentile of all GPUs, and its nearest rivals are all legacy parts from over a decade ago. This extreme disparity between CPU and GPU capability means that the Arc B370 is the sole bottleneck in Overpower.

The resolution scaling confirms this. When moving from 1080p Low (65 FPS) to 1440p Low (58 FPS), the frame rate drops by 7 FPS, a modest 10.8% decrease. Moving from 1440p Low to 4K Low (49 FPS) results in another 9 FPS drop, a 15.5% decrease. These are relatively small penalties for a 4x increase in pixel count, which is typical of a GPU that is already saturated at lower resolutions. If the CPU were the limiting factor, the resolution scaling would show much larger frame rate differences.

The settings scaling tells a similar story. At 1080p, moving from Low to Medium costs 24 FPS (65 to 41), which is a 36.9% drop. This indicates that the GPU is severely taxed by the additional shader and texture work in the Medium preset. The jump from High to Ultra costs only 7 FPS (38 to 31), suggesting that the Ultra preset adds effects that are less demanding relative to the already-strained GPU. The CPU, which would handle physics and AI calculations, is not causing these drops; rather, the GPU's limited execution units are the constraint.

At higher resolutions, the GPU's weaknesses become even more pronounced. At 4K, even the Low preset averages only 49 FPS, meaning the GPU cannot maintain 60 FPS regardless of settings. This is a pure GPU limitation; the CPU's performance is essentially irrelevant at this point. The data supports a clear conclusion: for Overpower, the Intel Arc B370 is the binding constraint, and the CPU has more than enough headroom to support any of the tested configurations.

The Verdict

The data answers the question directly: can this PC run Overpower? Yes, but only in a narrow set of circumstances. At 1920x1080 with Low settings, the system achieves an average of 65 FPS, clearing the 60 FPS playable threshold. This is the sole configuration that meets the standard.

At 2560x1440, the system cannot sustain 60 FPS on any preset. The closest is Low settings at 58 FPS, which is 2 FPS short of the threshold. At 3840x2160, the results are worse, with Low settings averaging 49 FPS and all other presets falling below 35 FPS.

The verdict by resolution is unambiguous. For 1080p, the only playable setting is Low, and the recorded average at that setting is 65 FPS. For 1440p, there are no playable settings. For 4K, there are no playable settings.

The Intel Core Ultra 5 245 is more than capable for this game, with a 90th percentile CPU ranking and benchmark scores that put it in the same class as the AMD Ryzen 9 7900 and Intel Core i5-14600K. The Intel Arc B370, however, is a 25 W integrated GPU with system-shared memory, and its performance in Overpower reflects its 5th percentile GPU ranking. The combination of a high-end CPU and a low-end GPU produces a system that is strictly limited by graphics performance.

For players who want to experience Overpower, the only viable path is to run the game at 1920x1080 on Low settings, accepting the 65 FPS average as the ceiling. Medium settings drop the average to 41 FPS, which is likely to feel stuttery and inconsistent given the 34 to 47 FPS range. Higher resolutions are simply not an option with this hardware. The system can run the game, but it does so with significant visual compromises.