Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Overpower
Action 2023

Overpower

84%
Great Match Your system meets recommended requirements.

Performance

1080p (Full HD)

Low 1080p Measured
110 FPS
Ultra 1080p Measured
53 FPS

1440p (2K / QHD)

Low 1440p Measured
98 FPS
Ultra 1440p Measured
47 FPS

4K (Ultra HD)

Low 4K Measured
84 FPS
Ultra 4K Measured
40 FPS
15.6ms Frame Time
23ms Input Latency
4K Best Resolution

Requirements Check

Processor
Required 37,513
Your CPU 79,097
Graphics Card
Required 27,382
Your GPU 20,556

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 40 49 52 84
1440p QHD 47 57 62 98
1080p Full HD 53 64 69 110

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 64
1920x1080 Low 110
1920x1080 Medium 69
1920x1080 Ultra 53
2560x1440 High 57
2560x1440 Low 98
2560x1440 Medium 62
2560x1440 Ultra 47
3840x2160 High 49
3840x2160 Low 84
3840x2160 Medium 52
3840x2160 Ultra 40

Performance Analysis: Overpower on Your System

The Intel Core i9-14900K paired with the Intel Arc B570 presents a mixed bag for Overpower, an action title released in 2023. This combination lands at rank 2987 out of 3713 tested combos, placing it in the lower third of all tested systems. The benchmark data reveals a setup that can handle the game at 1080p and 1440p with some compromises, but struggles at 4K. The following analysis breaks down the measured performance, optimal settings, and how this combo stacks up against alternatives.

Measured FPS Breakdown

The measured FPS data shows a clear pattern across all three resolutions: the Arc B570 is the limiting factor, and the Core i9-14900K's high multi-threaded performance cannot overcome the GPU's frame rate ceiling. At 1920x1080, the combo starts at 110 FPS average on Low settings, which is the highest average recorded for this pairing. Moving to Medium drops the average to 69 FPS, with a minimum of 59 FPS and a maximum of 79 FPS. High settings at 1080p yield 64 FPS average, while Ultra falls to 53 FPS average. The gap between Low and Medium is 41 FPS, indicating a significant performance cliff as texture quality and effects ramp up.

At 2560x1440, the averages drop noticeably. Low settings still produce a solid 98 FPS average, but Medium falls to 62 FPS with a minimum of 52 FPS and a maximum of 71 FPS. High settings at 1440p average 57 FPS, which is below the 60 FPS playable threshold. Ultra at 1440p drops further to 47 FPS average. The delta between Low and Medium at this resolution is 36 FPS, slightly smaller than at 1080p but still substantial. The 1440p High result is particularly telling: it is only 7 FPS behind the 1080p High result, suggesting the GPU is hitting a compute limit rather than a memory bandwidth limit.

The 3840x2160 results are the weakest. Low settings average 84 FPS, which is playable, but Medium drops to 52 FPS with a minimum of 44 FPS and a maximum of 60 FPS. High settings average 49 FPS, and Ultra averages 40 FPS. The step from Low to Medium at 4K is a 32 FPS drop, and the step from Medium to High is only 3 FPS, showing diminishing returns as the GPU saturates. The minimum FPS of 44 at 4K Medium indicates that frame pacing will be inconsistent, even if the average is close to playable.

Across all settings, the pattern is consistent: Low is always comfortably above 60 FPS at every resolution, while Ultra is always below 60 FPS. The 14900K's raw CPU power, evidenced by its 39399.5 Cinebench R23 multi-core score and 58674 Passmark multi-thread score, does not translate into higher frame rates because the Arc B570's 11.52 TFLOPS FP32 throughput and 380.0 GB/s memory bandwidth become the bottleneck.

Best Settings per Resolution

For each resolution, the most demanding preset that stays at or above 60 FPS average is as follows:

  • 3840x2160: Low settings is the only playable preset, averaging 84 FPS. Medium falls to 52 FPS, which misses the 60 FPS target. The data shows no other 4K preset clears the threshold.
  • 2560x1440: Medium settings is the best playable option, averaging 62 FPS. This preset has a minimum of 52 FPS, so expect occasional dips below 60, but the average is sustainable. High settings at 57 FPS is just below the threshold.
  • 1920x1080: High settings is the best playable preset, averaging 64 FPS. Medium also clears the bar at 69 FPS, but High offers better visual quality for only a 5 FPS average cost. Ultra at 53 FPS is not playable.

The takeaway is that this combo requires a settings compromise at every resolution. At 4K, you must use Low to stay smooth. At 1440p, Medium is the ceiling. At 1080p, High is the ceiling. The 60 FPS threshold is the defining constraint; no preset above these specified levels reaches it.

FAQ

*Q: Can this PC run Overpower at 4K with High settings?*

A: No. The measured average FPS at 3840x2160 High is 49 FPS, which is 11 FPS below the 60 FPS playable threshold. The only playable 4K setting is Low, which averages 84 FPS.

Q: What is the best visual quality I can get at 1440p while staying playable?

A: Medium settings at 2560x1440 is the best playable option, averaging 62 FPS. High settings average 57 FPS, which is below the threshold. The Medium preset has a minimum of 52 FPS, so frame dips are possible.

Q: Is the Intel Core i9-14900K bottlenecking the Intel Arc B570?

A: No CPU bottleneck is evident in the data. The Core i9-14900K has a 95th percentile ranking among all CPUs, with a Passmark single-thread score of 4697 and a Cinebench R23 single-core score of 2262.5. The FPS differences between resolutions and settings are consistent with GPU limitations, not CPU limitations.

Q: How does the Arc B570's performance compare to its nearest rivals?

A: The Arc B570's average benchmark score of 20556 is within 0.5% of all its nearest rivals. It is 0.1% ahead of the NVIDIA GeForce RTX 3070 Mobile, 0.1% behind the Intel Arc A750, 0.4% ahead of the NVIDIA Quadro M4000M, and 0.5% behind the AMD Radeon R9 M390X. These are effectively identical performance levels.

Q: Is the 1080p Ultra preset completely unplayable?

A: Yes. The 1920x1080 Ultra preset averages 53 FPS, which is 7 FPS below the 60 FPS threshold. The data shows no minimum or maximum FPS for this preset, but the average is definitive.

Q: What frame rate can I expect at 4K Low settings?

A: The 3840x2160 Low preset averages 84 FPS. This is the highest average of any 4K preset and is the only 4K setting that clears the 60 FPS playable threshold.

How This Combo Ranks

This combination ranks 2987 out of 3713 tested combos for Overpower, placing it in the 20th percentile of all tested systems. This is a low ranking, driven almost entirely by the GPU. The Intel Core i9-14900K is a top-tier CPU with a 95th percentile ranking among all CPUs, but the Arc B570's 65th percentile ranking among all GPUs holds the combo back. The rank of 2987 means that over 80% of tested combos achieve better performance in this game.

The disparity between CPU and GPU performance is stark. The CPU's Passmark multi-thread score of 58674 is exceptional, but the GPU's Passmark G3D score of 14195 is merely mid-range. In Overpower, the frame rate scales directly with GPU load, as shown by the 110 FPS at 1080p Low versus 40 FPS at 4K Ultra. The combo's rank reflects this GPU-bound reality. For context, the CPU's nearest rivals, such as the Intel Core i9-14900KF (0.3% lower average score) and the AMD EPYC 7413 (1.2% higher average score), would not change the ranking because the GPU remains the bottleneck.

Similar Performance Alternatives

Based on the nearest rivals for both components, several alternative pairings would produce nearly identical frame rates in Overpower.

On the CPU side, the Intel Core i9-14900KF has an average benchmark score of 79371, which is 0.3% lower than the 14900K's 79097. This is a negligible difference, so swapping to the KF variant would yield the same FPS in this game. The Intel Core Ultra 9 290HX Plus (score 79574, 0.6% lower) and the AMD EPYC 7413 (score 80041, 1.2% higher) are also within 1.2% of the 14900K's performance. Any of these CPUs paired with the Arc B570 would produce essentially identical results, as the GPU is the limiting factor.

On the GPU side, the Arc B570's nearest rivals are all within 0.5% of its average score of 20556. The NVIDIA GeForce RTX 3070 Mobile (score 20534, 0.1% higher) would perform virtually identically. The Intel Arc A750 (score 20582, 0.1% lower) is the closest match and would be the most direct swap. The NVIDIA Quadro M4000M (score 20480, 0.4% higher) and the AMD Radeon R9 M390X (score 20662, 0.5% lower) are also effectively identical in raw compute. However, these are mobile or older workstation parts, so driver optimization for Overpower could skew results slightly, but the benchmark data suggests frame rates would be within 1-2 FPS of the Arc B570.

A combo using the 14900K with an Arc A750 would be the most logical alternative, as the A750's score is nearly identical. Similarly, pairing the 14900KF with the Arc B570 would be a drop-in equivalent. The data does not support any alternative combo producing meaningfully higher FPS.

The Verdict

Can this PC run Overpower? Yes, but with significant settings compromises. The verdict by resolution is clear: at 3840x2160, the only playable setting is Low, which averages 84 FPS. At 2560x1440, Medium settings average 62 FPS, making it the best playable preset. At 1920x1080, High settings average 64 FPS, which is the best visual quality this combo can maintain above 60 FPS.

The 60 FPS threshold is the hard limit. Every preset above these levels falls below 60 FPS: 4K Medium (52 FPS), 4K High (49 FPS), 4K Ultra (40 FPS), 1440p High (57 FPS), 1440p Ultra (47 FPS), 1080p Ultra (53 FPS). The Core i9-14900K is more than capable, but the Arc B570's 10 GB GDDR6 memory and 380.0 GB/s bandwidth are simply not enough to push higher settings at playable frame rates.

For a practical recommendation: if you own or plan to build this combo, target 1080p High or 1440p Medium for the best balance of visual fidelity and smoothness. Avoid Ultra settings entirely, as they consistently miss the 60 FPS target. At 4K, you are limited to Low settings, which is playable but visually basic. This is a functional gaming PC for Overpower, but it is far from optimal, and the ranking of 2987 out of 3713 confirms that most other combos will deliver a better experience.