Instant compatibility check with FPS benchmarks and optimization tips
Overpower
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 26 | 32 | 34 | 54 |
| 1440p QHD | 31 | 37 | 40 | 64 |
| 1080p Full HD | 35 | 42 | 45 | 72 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Overpower on Your System
Measured FPS Breakdown
At 3840x2160, the data shows a narrow playable window that never reaches the 60 FPS threshold. The Low preset averages 54 FPS, which is the highest recorded result at this resolution. Medium drops to 34 FPS on average, with a minimum of 29 FPS and a maximum of 39 FPS. High averages 32 FPS, and Ultra falls to 26 FPS. The gap between Low and Medium is substantial, a 20 FPS average difference, indicating a steep scaling cost when moving from the least demanding preset to the next tier.
At 2560x1440, the picture improves slightly. Low averages 64 FPS, which clears the 60 FPS playable threshold. Medium averages 40 FPS, with a minimum of 34 FPS and a maximum of 46 FPS. High averages 37 FPS, and Ultra averages 31 FPS. The difference between Low and Medium here is 24 FPS, even larger than at 4K. This suggests that the Medium preset introduces rendering features that this GPU handles poorly, regardless of resolution.
At 1920x1080, Low averages 72 FPS, the only preset at any resolution to exceed 60 FPS by a comfortable margin. Medium averages 45 FPS, with a minimum of 38 FPS and a maximum of 52 FPS. High averages 42 FPS, and Ultra averages 35 FPS. The scaling from Low to Medium is 27 FPS, again showing a sharp cliff. The difference between Medium and High is only 3 FPS, while High to Ultra costs another 7 FPS. This pattern repeats across all resolutions: the Low preset is the only one that delivers smooth gameplay, and every step above it incurs a heavy performance penalty.
The recorded data does not include minimum or maximum FPS values for several presets, specifically Low, High, and Ultra at every resolution. Only the Medium preset at each resolution has complete min and max numbers. For those Medium runs, the spread is consistent: about 10 to 12 FPS between minimum and maximum. At 1080p Medium, the range is 38 to 52 FPS. At 1440p Medium, it is 34 to 46 FPS. At 4K Medium, it is 29 to 39 FPS. These ranges indicate noticeable frame pacing variation, but the averages are low enough that the experience would feel stuttery regardless.
CPU and GPU Roles
The CPU in this configuration is an Intel Core i9-14900K, a 24-core, 32-thread desktop processor with a boost clock of 6.00 GHz. Its benchmark scores are strong: it sits at the 95th percentile among all CPUs, with an average benchmark score of 79097. The GPU is an Intel Arc B390, which is an integrated graphics solution based on the Xe3-LPG architecture, built on a 3 nm process. Its average benchmark score is 1482, and it sits at the 9th percentile among all GPUs. This is a massive imbalance.
The measured FPS data makes the GPU bottleneck obvious. Across all resolutions, the Low preset delivers the highest FPS, and the gap between Low and Medium is consistently larger than the gap between Medium and Ultra. This behavior is typical of a GPU that runs out of shading throughput, texture rate, or memory bandwidth when additional effects are enabled. The Arc B390 has 1536 shading units, 48 TMUs, and 24 ROPs, with a pixel rate of 60.00 GPixel/s and a texture rate of 120.0 GTexel/s. Those numbers are modest for a modern gaming GPU, and the integrated nature of the part means it shares system memory, with bandwidth described as system dependent.
Resolution scaling also points to the GPU as the limiting factor. At 1080p Low, the average is 72 FPS. At 1440p Low, it drops to 64 FPS. At 4K Low, it falls to 54 FPS. The decline is steady but not dramatic, which is consistent with a GPU that is already near its limits even at 1080p. If the CPU were the bottleneck, we would expect much smaller FPS differences between 1080p and 1440p, since the CPU workload does not change much with resolution. Instead, the FPS drops by 8 going from 1080p to 1440p, and by another 10 going from 1440p to 4K. That is a GPU-bound scaling pattern.
The CPU's role becomes more apparent when looking at preset scaling. The i9-14900K has more than enough compute headroom for this game, as indicated by its Cinebench R23 multicore score of 39399.5 and single-core score of 2262.5. At no point in the measured data does the FPS improve when lowering resolution alone, which would happen if the CPU were holding the system back. Instead, every resolution benefits from the Low preset, and every resolution suffers at Medium and above. The GPU is responsible for the preset cost, while the CPU simply feeds it frames without becoming a constraint.
The verdict from the database is clear: this combination is severely GPU-limited. The CPU sits at the 95th percentile, while the GPU sits at the 9th percentile. In practical terms, the i9-14900K is doing almost none of the heavy lifting for this game's frame rate. The Arc B390 is the sole determinant of playability, and its performance ceiling is low.
Best Settings per Resolution
At 3840x2160, no preset reaches the 60 FPS playable threshold. The best result is Low at 54 FPS average, which is still 6 FPS short. The database lists no playable settings for 4K, and the best settings entry is null. This means 4K is not viable for smooth gameplay on this hardware, regardless of preset.
At 2560x1440, the Low preset averages 64 FPS, which clears the threshold. This is the most demanding preset that stays at or above 60 FPS. Medium averages 40 FPS, High averages 37 FPS, and Ultra averages 31 FPS, so none of those are playable. The best settings at 1440p are Low, with an average FPS of 64.
At 1920x1080, the Low preset averages 72 FPS, again clearing the threshold comfortably. Medium averages 45 FPS, High averages 42 FPS, and Ultra averages 35 FPS. The best settings at 1080p are Low, with an average FPS of 72.
The pattern is consistent: Low is the only playable preset, and only at 1440p and 1080p. The gap between Low and Medium is so large that there is no middle ground. A user cannot trade a small amount of visual quality for a small FPS hit; instead, moving from Low to Medium costs roughly one-third of the frame rate. This makes preset selection binary: either accept Low, or accept a sub-60 FPS experience.
Similar Performance Alternatives
The CPU's nearest rivals in the database are all very close in average benchmark score. The Intel Core i9-14900KF has an average score of 79371, which is 0.3 percent lower than the i9-14900K's 79097. The Intel Core Ultra 9 290HX Plus scores 79574, 0.6 percent lower. The AMD EPYC 7413 scores 80041, 1.2 percent lower. The AMD Ryzen AI Max+ 395 scores 77740, which is 1.7 percent higher than the i9-14900K. In practical terms, any of these CPUs would perform nearly identically in Overpower, since the game's frame rate is entirely GPU-bound. The differences among these CPUs are well within the noise of a game benchmark.
The GPU's nearest rivals paint a different picture. The NVIDIA GeForce GT 520MX has an average score of 1463, which is 1.3 percent higher than the Arc B390's 1482. The NVIDIA GeForce 800M scores 1460, 1.5 percent higher. The NVIDIA GeForce GT 625 OEM scores 1446, 2.5 percent higher. The NVIDIA GeForce GT 710 scores 1443, 2.7 percent higher. These are all older, low-end mobile or OEM graphics parts. The fact that the Arc B390 is grouped with them indicates that its performance class is extremely low, far below any modern discrete gaming GPU. A user considering this system should expect frame rates in line with those legacy parts, not with anything from the current discrete GPU market.
The delta percentages for the GPU rivals are all positive, meaning each rival actually scores slightly higher than the Arc B390. The closest rival, the GT 520MX, is 1.3 percent faster. The furthest, the GT 710, is 2.7 percent faster. This is a very tight cluster, and the Arc B390 sits at the bottom of it. For Overpower specifically, any of these GPUs would deliver essentially the same experience: playable only at Low settings, and only at 1080p or 1440p.
The Verdict
The database records a clear verdict for this PC configuration. At 3840x2160, there are no playable settings. The best average FPS is 54 at Low, which is below the 60 FPS threshold. The system cannot run Overpower smoothly at 4K on any preset.
At 2560x1440, the Low preset is playable, averaging 64 FPS. This clears the threshold by 4 FPS. Medium, High, and Ultra all fall below 60 FPS, with averages of 40, 37, and 31 respectively. The system can run the game at 1440p, but only on the lowest visual settings.
At 1920x1080, the Low preset averages 72 FPS, which is 12 FPS above the threshold. This is the best experience this hardware can offer for Overpower. Medium and above are not playable, with averages of 45, 42, and 35 FPS.
The overall answer is: yes, this PC can run Overpower, but with severe limitations. The i9-14900K is more than capable, but the Arc B390 integrated GPU is the bottleneck. The game is playable at 1080p Low and 1440p Low, but not at 4K, and not at Medium or higher settings at any resolution. The frame rates at Medium and above are consistently in the 26 to 45 FPS range, which is below the 60 FPS playable threshold and would feel sluggish during action sequences.
The combo rank in the database is 3301 out of 3713 combinations. That places this configuration in the bottom 11 percent of all tested combos for this game. This is a poor result, driven entirely by the GPU's low percentile ranking. The CPU's 95th percentile ranking does not compensate for the GPU's 9th percentile ranking.
FAQ
Q: Can this PC run Overpower at 4K?
A: No. At 3840x2160, the highest average FPS is 54 on the Low preset, which is below the 60 FPS playable threshold. Medium averages 34 FPS, High averages 32 FPS, and Ultra averages 26 FPS. The database lists no playable settings for 4K.
Q: What is the best preset for 1080p gameplay?
A: The Low preset is the only playable option at 1920x1080, averaging 72 FPS. Medium averages 45 FPS, High averages 42 FPS, and Ultra averages 35 FPS, all below the 60 FPS threshold.
Q: Is 1440p playable with this hardware?
A: Yes, but only on the Low preset. At 2560x1440, Low averages 64 FPS, which clears the threshold. Medium averages 40 FPS, High averages 37 FPS, and Ultra averages 31 FPS, none of which are playable.
Q: Why is the frame rate so much lower at Medium compared to Low?
A: The recorded data shows a steep performance cliff between Low and Medium at every resolution. At 1080p, Low averages 72 FPS while Medium averages 45 FPS, a 27 FPS drop. At 1440p, the drop is 24 FPS (64 to 40). At 4K, the drop is 20 FPS (54 to 34). This indicates the GPU cannot handle the additional rendering workload of the Medium preset.
Q: How does the CPU compare to similar processors for this game?
A: The Intel Core i9-14900K has an average benchmark score of 79097, sitting at the 95th percentile. Its nearest rival, the Intel Core i9-14900KF, scores 79371, which is 0.3 percent lower. The AMD Ryzen AI Max+ 395 scores 77740, which is 1.7 percent higher. These differences are negligible for Overpower because the game is GPU-bound.
Q: What GPU performance class does the Intel Arc B390 belong to?
A: The Arc B390 has an average benchmark score of 1482, placing it at the 9th percentile. Its nearest rivals are the NVIDIA GeForce GT 520MX (score 1463, 1.3 percent higher), NVIDIA GeForce 800M (score 1460, 1.5 percent higher), NVIDIA GeForce GT 625 OEM (score 1446, 2.5 percent higher), and NVIDIA GeForce GT 710 (score 1443, 2.7 percent higher). This places it among very old, low-end graphics parts.