Instant compatibility check with FPS benchmarks and optimization tips
Overpower
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 24 | 28 | 31 | 49 |
| 1440p QHD | 28 | 34 | 36 | 58 |
| 1080p Full HD | 31 | 38 | 41 | 65 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Overpower on Your System
Measured FPS Breakdown
The recorded data for Overpower with the Intel Core i9-14900K and Intel Arc B370 shows a clear performance ceiling imposed by the graphics solution. Across all resolutions, the average frame rates sit below the 60 FPS playable threshold except for the lowest preset at 1080p. The measurements cover four settings tiers (Low, Medium, High, Ultra) at three resolutions, with min and max values recorded only for the Medium preset.
At 3840x2160, the results are as follows. Low settings produce an average of 49 FPS, which is the highest figure at this resolution, but still 11 FPS short of the playable mark. Medium settings drop to 31 FPS average, with a recorded minimum of 26 FPS and maximum of 35 FPS. High settings average 28 FPS, and Ultra settings average 24 FPS. None of these 4K results approach 60 FPS, and even the best case (Low) falls well short.
Moving to 2560x1440, the pattern repeats with slightly better numbers. Low settings average 58 FPS, missing the 60 FPS threshold by just 2 FPS. Medium settings average 36 FPS, with a range of 31 FPS minimum to 42 FPS maximum. High settings average 34 FPS, and Ultra settings average 28 FPS. The 1440p results show that only the Low preset comes close to playability, and it still does not reach the required average.
At 1920x1080, the data finally shows a playable configuration. Low settings average 65 FPS, which exceeds the 60 FPS threshold by 5 FPS. Medium settings average 41 FPS, with a minimum of 34 FPS and maximum of 47 FPS. High settings average 38 FPS, and Ultra settings average 31 FPS. The gap between Low and Medium at 1080p is substantial: 24 FPS, indicating that the visual quality jump from Low to Medium carries a heavy performance cost for this hardware.
The min and max data points for Medium settings across all resolutions show consistent frame pacing: at 4K the range is 26 to 35 FPS (spread of 9), at 1440p the range is 31 to 42 FPS (spread of 11), and at 1080p the range is 34 to 47 FPS (spread of 13). This suggests that while average FPS improves as resolution drops, frame time variance also increases slightly, which may affect perceived smoothness.
The overall picture from the measured FPS is that this combo delivers playable performance only at 1080p with Low settings. Every other combination of resolution and preset falls below 60 FPS, with most results landing in the 24 to 49 FPS range. The data shows a steep drop-off when moving from Low to Medium, and a more gradual decline from Medium to High to Ultra.
CPU and GPU Roles
The Intel Core i9-14900K is a high-end desktop processor with 24 cores, 32 threads, and a boost clock of 6.00 GHz. Its benchmark results place it in the 95th percentile among all CPUs, with an average benchmark score of 79097. The Intel Arc B370, by contrast, is an integrated graphics part (IGP) based on the Panther Lake chip with Xe3-LPG architecture, 1280 shading units, and a 25 W TDP. Its 3DMark Steel Nomad DX12 score is 1184, placing it in the 5th percentile among all GPUs. This massive gap in relative performance between the CPU and GPU is the defining factor in Overpower's frame rates.
The resolution scaling in the measured data reveals which component is the bottleneck. At 4K, Low settings average 49 FPS; at 1440p, Low settings average 58 FPS; at 1080p, Low settings average 65 FPS. The improvement from 4K to 1080p is 16 FPS, or roughly 33% higher. For a CPU-bound scenario, resolution changes would have minimal impact on FPS. The fact that FPS climbs meaningfully as resolution drops indicates that the GPU (the Arc B370) is the limiting factor across all tested configurations.
The preset scaling reinforces this conclusion. At 1080p, moving from Low to Medium drops the average from 65 to 41 FPS, a 37% reduction. At 1440p, the same preset change drops from 58 to 36 FPS, a 38% reduction. At 4K, Low to Medium drops from 49 to 31 FPS, a 37% reduction. The consistency of this percentage drop across resolutions suggests that the GPU's shading and texture throughput are saturated regardless of resolution, and the added load from Medium settings is proportionally similar.
The CPU's role in this combo is to feed the GPU without becoming a constraint. Given that the i9-14900K ranks in the 95th percentile and the Arc B370 ranks in the 5th percentile, the CPU has enormous headroom. The data shows no scenario where the CPU would limit frame rates: even at 1080p Low, where the GPU is least stressed, the average FPS is only 65, which is far below what this CPU could drive with a more powerful GPU. In practical terms, the Arc B370 is the sole performance gate for Overpower.
The architecture of the Arc B370 also matters. It is an integrated GPU with system-shared memory, meaning its bandwidth is "System Dependent." This explains why the GPU struggles even at Low settings: shared memory bandwidth and the lack of dedicated VRAM create inherent latency and throughput limits. The CPU's dual-channel DDR4/DDR5 memory support cannot compensate for the GPU's reliance on system memory.
For builders, the takeaway is straightforward: if you pair a top-tier CPU with this iGPU, you are paying for CPU headroom that Overpower will never use. The game is entirely GPU-bound with this combo, and any FPS gains would require a different graphics solution, not a stronger processor.
Best Settings per Resolution
The database's playable threshold is 60 FPS average. Using the recorded measurements, the best settings for each resolution are determined by finding the most demanding preset that still maintains an average of at least 60 FPS.
At 3840x2160, no settings preset reaches the playable threshold. The highest average is 49 FPS at Low settings, which falls 11 FPS short. Medium, High, and Ultra all score below 31 FPS. There is no playable configuration at 4K for this combo, and the database's verdictByResolution field confirms this with an empty list of playable settings.
At 2560x1440, the same situation applies. Low settings average 58 FPS, which is 2 FPS below the threshold. Medium averages 36 FPS, High averages 34 FPS, and Ultra averages 28 FPS. No preset achieves 60 FPS, and the verdictByResolution field lists no playable settings for 1440p.
At 1920x1080, Low settings average 65 FPS, which clears the 60 FPS threshold by 5 FPS. This is the only playable configuration in the entire dataset. The next step up, Medium, averages 41 FPS, which is 19 FPS below the threshold. Therefore, the best settings for 1080p are Low, with an average of 65 FPS. The verdictByResolution field confirms this: playable settings include only "Low," and the best settings is "Low" with an avgFpsAtBest of 65.
The practical recommendation from this data is that if you want to play Overpower with this hardware, you must run 1080p at Low settings. Any attempt to raise the preset to Medium or above will drop you below 60 FPS, and any attempt to increase resolution will also fail the threshold. The 65 FPS at 1080p Low is a functional, if modest, experience, but it leaves no room for visual upgrades.
FAQ
Q: Can this combo run Overpower at 4K?
A: No. The highest average FPS at 3840x2160 is 49 FPS at Low settings, which is below the 60 FPS playable threshold. Medium, High, and Ultra all average between 24 and 31 FPS.
Q: What is the only playable settings preset across all resolutions?
A: The only configuration that reaches 60 FPS average is 1920x1080 with Low settings, which produces 65 FPS. No other resolution and preset combination in the measured data achieves the playable threshold.
Q: How much performance is lost when moving from Low to Medium at 1080p?
A: At 1920x1080, Low averages 65 FPS while Medium averages 41 FPS. This is a 24 FPS drop, or roughly 37% lower performance.
Q: Is the CPU or GPU the limiting factor in this game?
A: The GPU is the limiting factor. The Intel Arc B370 ranks in the 5th percentile among all GPUs with a 3DMark Steel Nomad score of 1184, while the Intel Core i9-14900K ranks in the 95th percentile among all CPUs. The FPS scales significantly with resolution changes, which is characteristic of GPU-bound scenarios.
Q: Does the Arc B370 have dedicated video memory?
A: No. The Intel Arc B370 uses "System Shared" memory with a "System Dependent" bandwidth. This means it relies on the system's RAM, which contributes to its low performance relative to discrete GPUs.
Q: What is the frame rate range at Medium settings?
A: At 4K Medium, the range is 26 to 35 FPS. At 1440p Medium, the range is 31 to 42 FPS. At 1080p Medium, the range is 34 to 47 FPS. The min and max values were only recorded for the Medium preset.
Similar Performance Alternatives
The nearest rivals for the Intel Core i9-14900K provide context for its CPU performance, though they do not change the GPU-bound nature of Overpower. The Intel Core i9-14900KF has an average benchmark score of 79371, which is 0.3% lower than the i9-14900K's 79097 (effectively identical). The Intel Core Ultra 9 290HX Plus scores 79574, 0.6% higher. The AMD EPYC 7413 scores 80041, 1.2% higher. The AMD Ryzen AI Max+ 395 scores 77740, which is 1.7% lower. In practical terms, all four rivals are within 2% of the i9-14900K, meaning any of them would behave nearly identically in Overpower when paired with the same GPU. Since the GPU is the bottleneck, swapping the CPU to any of these alternatives would produce essentially the same FPS numbers.
For the GPU, the Intel Arc B370's nearest rivals are all older, low-end parts. The ATI Mobility Radeon HD 5570 scores 1186, which is 0.2% higher than the Arc B370's 1184. The ATI Radeon HD 5770 scores 1190, 0.5% higher. The AMD Radeon HD 7650M scores 1192, 0.7% higher. The AMD FirePro M2000 scores 1168, which is 1.4% lower. These deltas are all within 1.5%, so any of these GPUs would produce very similar frame rates in Overpower. The practical implication is that the Arc B370 performs at the level of integrated and entry-level discrete GPUs from over a decade ago, which explains its inability to reach 60 FPS at most settings.
For a builder considering this combo, the data suggests that the CPU choice is irrelevant to Overpower's performance. Any of the four rival CPUs would deliver the same experience. The GPU choice, however, is critical: the Arc B370 and its four rivals all sit in the 5th percentile of GPU performance, and none of them would provide a meaningfully better experience in this game.
How This Combo Ranks
The Intel Core i9-14900K and Intel Arc B370 combination ranks 3427 out of 3713 tested combos in Overpower. This places it in the bottom 7.7% of all configurations in the database. The rank reflects the severe mismatch between a top-tier CPU and a bottom-tier iGPU.
The ranking makes sense given the measured FPS data. This combo cannot play Overpower at 60 FPS in any resolution except 1080p Low, and even that setting only achieves 65 FPS. The vast majority of tested combos in the database presumably include discrete GPUs that can handle higher resolutions and presets, which is why this combo sits so low.
The CPU's high percentile (95th) does not help the ranking because the game never becomes CPU-bound. The GPU's low percentile (5th) is the determining factor. In the database's overall scheme, this combo is essentially a test of whether a flagship processor can compensate for an integrated GPU; the answer, based on the rank and FPS data, is no.
For perspective, the combo's rank of 3427 out of 3713 means there are only 286 tested combinations that perform worse. Those would likely involve even older or weaker integrated GPUs or severely mismatched pairings. The i9-14900K + Arc B370 combo avoids the very bottom of the ranking, but it remains firmly in the lower tier of Overpower performance. If 60 FPS gaming is the goal, this combination is not suitable beyond the single 1080p Low configuration, and the ranking reflects that limitation.