Instant compatibility check with FPS benchmarks and optimization tips
Overpower
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your system exceeds recommended specs. Enjoy max settings!
Your GPU supports ray tracing.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 99 | 119 | 128 | 205 |
| 1440p QHD | 116 | 140 | 151 | 241 |
| 1080p Full HD | 130 | 157 | 169 | 271 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Overpower on Your System
The Intel Core i7-14700K paired with the NVIDIA GeForce RTX 4080 delivers consistently high frame rates in Overpower, with average FPS never dropping below 99 at any tested resolution or preset. Across all four settings at 1080p, 1440p, and 4K, the combo stays comfortably above the 60 FPS playable threshold, with the lowest recorded average being 99 FPS at 3840x2160 Ultra and the highest reaching 271 FPS at 1920x1080 Low.
Measured FPS Breakdown
At 1920x1080, the combination produces its strongest results, though the scaling between presets reveals clear performance tiers. Low settings deliver an average of 271 FPS, a figure that drops substantially to 169 FPS at Medium, then falls further to 157 FPS at High, and finally settles at 130 FPS on Ultra. The Medium preset has the only min/max data at this resolution, showing a range of 144 to 194 FPS, which suggests variance of roughly 50 FPS during typical gameplay. The gap between Low and Medium (102 FPS) is more than double the gap between Medium and High (12 FPS), indicating that the first step up from Low imposes a heavy scene complexity load, while subsequent increments are relatively modest in cost.
Moving to 2560x1440, all four presets remain exceptionally fluid. Low averages 241 FPS, Medium 151 FPS, High 140 FPS, and Ultra 116 FPS. The Medium min/max window at 1440p runs from 128 to 173 FPS, which is a similar spread to the 1080p Medium results, indicating that even with more pixels, the frame pacing holds up well. Notably, the percentage delta between Low and Medium is 37% (241 to 151), while the delta between Medium and High is only 7% (151 to 140). That disproportionate penalty for enabling Medium suggests a specific rendering feature (e.g., shadows or reflections) that activates at that tier, rather than a gradual load increase.
At 3840x2160, the impact of 4K resolution becomes clear, but the system still delivers high performance. Low averages 205 FPS, Medium 128 FPS, High 119 FPS, and Ultra 99 FPS. The Medium min/max range is 109 to 147 FPS, tighter than at lower resolutions, which points to the GPU being more consistently limited by pixel throughput than by scene variability. The difference between Medium and High at 4K is only 9 FPS (128 to 119), while High to Ultra is 20 FPS (119 to 99), so the Ultra preset carries the heaviest cost at this resolution.
Similar Performance Alternatives
Looking at the CPU benchmark data, the Intel Core i7-14700K sits at a 94th percentile among all tested processors, with an average benchmark score of 69355. Its nearest rival in the database is the AMD EPYC 9115, which scores 69288, a delta of 0.1% — essentially identical performance. The AMD Ryzen 9 7950X trails by a minuscule 0.2%, scoring 69515, while the AMD Ryzen 9 7940HX is 0.7% behind at 69875, and the AMD Ryzen 7 9700F is 0.9% behind at 69996. For Overpower, a system with any of these CPUs would produce nearly indistinguishable frame rates, since the 0.1% to 0.9% differences in synthetic CPU benchmarks translate to less than a single frame per second in the game’s measured FPS. The i7-14700K’s 20 cores and 28 threads, with a boost clock of 5.60 GHz, put it in the top tier for gaming, but the EPYC 9115 or Ryzen 9 7950X would behave almost exactly the same in this title.
On the GPU side, the RTX 4080 holds an 86th percentile among all GPUs, with an average benchmark score of 54247. Its closest competitor is the NVIDIA GeForce RTX 4080 SUPER, scoring 54209, a delta of 0.1% — so near-identical that a user would not see a meaningful FPS difference in Overpower. The AMD Radeon Pro W5700X is 1.1% higher (54828), the AMD Radeon RX 6750 GRE 12 GB is 2.6% higher (55698), and the AMD Radeon 8060S is 2.7% higher (55757). Note that these rival GPUs score slightly higher in synthetic benchmarks, meaning they would deliver roughly the same or a few FPS more in the game, but the delta is so small that the playable experience is identical. For Overpower’s measured FPS, swapping the RTX 4080 for an RTX 4080 SUPER would keep every average within 1 FPS, while the RX 6750 GRE might add about 2-3 FPS at most, which is within run-to-run noise.
CPU and GPU Roles
The data across resolutions and presets reveals how the balance between CPU and GPU shifts as the resolution changes. At 1080p, the CPU plays a larger role in reaching high FPS, while the RTX 4080 still has headroom. Across all four 1080p presets, the difference in average FPS from Low to Ultra is 141 FPS (271 to 130), but the largest jump occurs from Low to Medium (102 FPS), while Medium to High (12 FPS) and High to Ultra (27 FPS) are smaller. This pattern is consistent with a GPU-bound workload at lower settings, where the CPU’s 5.60 GHz boost clock and 28 threads are sufficient to feed the GPU, and the GPU’s 9728 shading units become the bottleneck only when texture and geometry loads rise. The fact that the FPS at 1080p Low (271) is only 30 FPS higher than at 1440p Low (241) indicates that the CPU is near its limit at that low GPU load; raising the resolution to 1440p does not drastically change the CPU’s work, so the GPU takes over.
At 1440p, the GPU starts to become more dominant. The same CPU pair produces a 241 FPS average at Low, but at 1440p, the GPU’s 16 GB GDDR6X and 716.8 GB/s bandwidth are more heavily taxed. The drop from Low to Medium at 1440p is 90 FPS (241 to 151), which is a 37% reduction, larger than the 38% reduction at 1080p (271 to 169). This suggests that the added pixel load at 1440p amplifies the cost of turning on medium-tier effects. From Medium to High (151 to 140, a 7% drop) and High to Ultra (140 to 116, a 17% drop), the GPU remains the limiting factor, but the CPU still contributes to the absolute frame ceiling.
At 4K UHD, the GPU is unambiguously the bottleneck. The difference between 1440p and 4K at Low preset is 241 vs 205 FPS (a 15% reduction), while at Ultra it is 116 vs 99 FPS (a 15% reduction as well). This consistent 15% penalty across presets indicates that the GPU’s pixel throughput, measured at 280.6 GPixel/s and 761.5 GTexel/s, is the binding constraint. The CPU’s role diminishes further as resolution rises, because the number of draw calls per frame stays similar while the GPU’s work per frame expands. A slower CPU would still deliver nearly the same 4K FPS, but at 1080p Low the CPU would become a larger factor; the fact that 1080p Low (271 FPS) is only 12% higher than 1440p Low (241 FPS) shows that the CPU is already near its limit even at 1080p.
How This Combo Ranks
In the database of tested combinations for Overpower, the Intel Core i7-14700K + NVIDIA GeForce RTX 4080 ranks 201st out of 3713 combos, placing it in the top 5.4% of all systems. That rank is driven by the GPU’s 86th percentile and the CPU’s 94th percentile, but the rank is not directly a product of those percentiles, because the game’s specific engine scales more strongly with the GPU. Given that the GPU’s nearest rival, the RTX 4080 SUPER, only 0.1% higher in synthetic scores, a combo with that GPU would rank near identically — likely within a few positions. The 201 rank means that there are 200 other CPU/GPU pairs that deliver higher average FPS in Overpower, but those are likely to pair the RTX 4080 with a top-tier CPU or use a faster GPU. The data shows that this combo is not the fastest possible, but it is far above the median, and the 60 FPS threshold is easily cleared at all settings.
To contextualize, the 201st rank among 3713 means that 94.6% of tested combos are slower, but the top 5.4% are faster. Since the CPU is in the top 6% (94th percentile) and the GPU in the top 14% (86th percentile), the coin is close to what you would expect from those hardware tiers, but the game’s engine is likely slightly more GPU-heavy, so the GPU’s lower percentile pulls the combo rank down a bit. If the game were more CPU-bound, the rank would be higher; if more GPU-bound, it would be lower. As it stands, the 201 rank is a solid high-end result.
FAQ
Q: What is the highest average FPS this combo can achieve in Overpower?
A: At 1920x1080 Low, the combo reaches an average of 271 FPS, which is the highest measured average across all resolutions and presets.
Q: Does the combo ever drop below 60 FPS in Overpower?
A: No, the lowest measured average FPS is 99 at 3840x2160 Ultra, and the lowest min FPS recorded is 109 at 3840x2160 Medium, so every setting at every resolution stays above the 60 FPS playable threshold.
Q: How much slower is 4K Ultra compared to 1080p Ultra?
A: At 1080p Ultra, the average is 130 FPS, while at 4K Ultra, it drops to 99 FPS, a reduction of 31 FPS (24% slower).
Q: Which is the better CPU for this GPU, the Intel Core i7-14700K or the AMD Ryzen 9 7950X?
A: The 14700K has an average benchmark score of 69355, while the Ryzen 9 7950X has 69515, a delta of 0.2% in favor of the AMD. In Overpower, this would translate to a negligible FPS difference.
Q: What is the FPS range for Medium settings at 1440p?
A: The measured min is 128 FPS and max is 173 FPS, with an average of 151 FPS.
Q: How does the RTX 4080 compare to the RTX 4080 SUPER in this game?
A: The RTX 4080 SUPER has an average benchmark score of 54209, which is 0.1% higher than the RTX 4080’s 54247 score, so the FPS in Overpower would be nearly identical, within 1 frame.
Best Settings per Resolution
For each resolution, the data identifies the most demanding preset that still stays at or above 60 FPS on average. Since all presets at all resolutions clear 60 FPS, the best setting is the Ultra preset for every resolution, which is the highest visual quality available.
- 1920x1080: Ultra, average 130 FPS. This is the highest quality and still delivers more than double the playable threshold.
- 2560x1440: Ultra, average 116 FPS. The ultra preset at this resolution still gives a 56 FPS headroom over the 60 threshold.
- 3840x2160: Ultra, average 99 FPS. Even the most demanding preset at 4K remains 39 FPS above the playable line.
For users who want the best visual fidelity, the Ultra preset is always the answer, since the GPU has enough headroom to run it without ever dropping below 99 FPS average. The Medium preset at each resolution has a min FPS of 144 at 1080p, 128 at 1440p, and 109 at 4K, so even the worst-case frame dips stay above 60, but Ultra is still the recommended choice because the average is so high.
Best Settings per Resolution
The table below shows the best settings per the data, defined as the highest quality preset that remains at or above 60 FPS average.
| Resolution | Best Setting | Average FPS |
|------------|--------------|-------------|
| 1920x1080 | Ultra | 130 |
| 2560x1440 | Ultra | 116 |
| 3840x2160 | Ultra | 99 |
Because every preset (Low, Medium, High, Ultra) at every resolution exceeds the 60 FPS threshold, the Ultra preset is the best choice everywhere. The only preset that has min FPS data is Medium, and its lowest min is 109 at 4K, so even the worst-case is well above 60. Therefore, there is no need to sacrifice quality for playability.
6. The Verdict
This PC can run Overpower with high frame rates at any resolution and any preset. The data is unequivocal: the lowest average FPS across all twelve measured conditions is 99 at 3840x2160 Ultra. At 2560x1440 Ultra, the average is 116 FPS, and at 1920x1080 Ultra, it is 130 FPS. All playable settings are listed as "High", "Low", "Medium", and "Ultra" for each resolution in the verdict data, meaning the game is fully playable at the highest quality on this hardware.
The Intel Core i7-14700K, with its 20 cores, 28 threads, and a boost clock of 5.60 GHz, provides more than enough single-thread performance for the game’s logic, and the RTX 4080’s 16 GB of GDDR6X and 48.74 TFLOPS FP32 keep the GPU well ahead of the 60 FPS line. At 4K Ultra, the 99 FPS average is a solid margin above the threshold, and at 1440p or 1080p, the combo easily supports high-refresh monitors. If any user wants to run Overpower at 4K with every setting maxed, this system delivers 99 FPS, which is excellent for a demanding action game. The only potential concern is that the RTX 4080 is end-of-life, but that does not affect current performance.
In summary, this PC can run Overpower at 60 FPS or better at all tested settings and resolutions. The highest playable preset is Ultra at every resolution, with the lowest margin being 39 FPS at 4K Ultra. The combination of the i7-14700K and RTX 4080 is a top-tier gaming setup that leaves no performance stone unturned for this title.