Instant compatibility check with FPS benchmarks and optimization tips
Overpower
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your system exceeds recommended specs. Enjoy max settings!
Your GPU supports ray tracing.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 77 | 93 | 100 | 160 |
| 1440p QHD | 91 | 109 | 118 | 189 |
| 1080p Full HD | 102 | 123 | 132 | 212 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Overpower on Your System
The Intel Core i7-14700F and NVIDIA GeForce RTX 4070 combination delivers a consistently high-refresh experience in Overpower, with measured data covering three resolutions and four quality presets. At 1080p, the average frame rate ranges from 212 FPS on Low to 102 FPS on Ultra, while 1440p sees 189 FPS on Low down to 91 FPS on Ultra. The most demanding scenario, 4K Ultra, still holds an average of 77 FPS, which places every tested configuration above the 60 FPS playability threshold. The data set includes full minimum and maximum readings only for the Medium preset at each resolution; those readings show 112–152 FPS at 1080p, 100–135 FPS at 1440p, and 85–115 FPS at 4K.
Measured FPS Breakdown
The measured FPS data paints a clear picture of performance scaling across resolutions and settings. At 1920x1080, the Low preset achieves an average of 212 FPS, which is the highest average recorded for this combo in any configuration. Moving to Medium, the average drops to 132 FPS, with a minimum of 112 FPS and a maximum of 152 FPS. The High preset averages 123 FPS, while Ultra averages 102 FPS. The difference between Low and Ultra at 1080p is 110 FPS, indicating that the GPU has substantial headroom even at the highest settings.
At 2560x1440, the pattern follows the expected scaling. Low averages 189 FPS, a 23 FPS reduction from the same preset at 1080p. Medium averages 118 FPS, with a minimum of 100 FPS and a maximum of 135 FPS. High averages 109 FPS, and Ultra averages 91 FPS. The gap between Low and Ultra at 1440p is 98 FPS, slightly narrower than at 1080p, which suggests that resolution scaling is beginning to affect the GPU more heavily.
At 3840x2160, the performance remains playable but the margins tighten. Low averages 160 FPS, Medium averages 100 FPS with a minimum of 85 FPS and a maximum of 115 FPS, High averages 93 FPS, and Ultra averages 77 FPS. The difference between Low and Ultra at 4K is 83 FPS, the smallest gap of the three resolutions. This indicates that at 4K, the GPU is the dominant constraint, as raising settings has a proportionally larger impact on frame rate compared to lower resolutions.
The data also reveals that the Medium preset consistently provides the only complete min/max measurements across all resolutions. At 1080p, the minimum of 112 FPS and maximum of 152 FPS show a 40 FPS spread. At 1440p, the spread is 35 FPS (100 to 135), and at 4K, the spread is 30 FPS (85 to 115). This narrowing spread with increasing resolution suggests that frame time consistency improves as the GPU becomes more uniformly loaded, though average FPS decreases accordingly.
FAQ
Q: What is the highest average FPS achieved by this combination in Overpower?
A: The highest average FPS is 212, recorded at 1920x1080 with the Low preset. This is the only configuration in the measured data that exceeds 200 FPS.
Q: Does the Intel Core i7-14700F and RTX 4070 maintain 60 FPS at 4K Ultra?
A: Yes. The measured average FPS at 3840x2160 with Ultra settings is 77, which is 17 FPS above the 60 FPS playability threshold. All four presets at 4K exceed 60 FPS.
Q: How does the Medium preset's minimum FPS compare across resolutions?
A: The Medium preset has complete min/max data for all resolutions. The minimum is 112 FPS at 1080p, 100 FPS at 1440p, and 85 FPS at 4K. All minimums remain above 60 FPS, indicating consistent performance even in demanding scenes.
Q: What is the performance difference between Low and Ultra at 1440p?
A: At 2560x1440, Low averages 189 FPS while Ultra averages 91 FPS, a difference of 98 FPS. This is the second-largest gap among the three resolutions, behind 1080p's 110 FPS difference.
Q: Which resolution shows the smallest FPS gap between Low and Ultra?
A: The 3840x2160 resolution shows the smallest gap, with Low averaging 160 FPS and Ultra averaging 77 FPS, a difference of 83 FPS.
Q: Is the RTX 4070's performance consistent in Overpower based on the available data?
A: The data indicates consistent performance, as all recorded minimum FPS values exceed the playable threshold. The Medium preset shows a maximum spread of 40 FPS at 1080p, narrowing to 30 FPS at 4K, suggesting stable frame delivery.
CPU and GPU Roles
The measured FPS data allows for an analysis of how the CPU and GPU contribute to performance across resolutions. The Intel Core i7-14700F, with 20 cores and 28 threads, provides substantial processing headroom. Its Cinebench R23 multicore score of 35122 and single-core score of 4958 indicate strong both multi-threaded and single-threaded capability. However, the game's performance scaling suggests that the GPU becomes the primary bottleneck as resolution increases.
The RTX 4070's role is evident in the FPS differences between resolutions. At 1080p, the Low preset averages 212 FPS, but this drops to 189 FPS at 1440p and 160 FPS at 4K. This scaling pattern — a 23 FPS drop from 1080p to 1440p and a 29 FPS drop from 1440p to 4K — indicates that the GPU is handling an increasing pixel workload. The RTX 4070's 12 GB of GDDR6X memory and 504.2 GB/s bandwidth are sufficient for the demands of Overpower at all tested settings.
The CPU's influence is more visible at lower resolutions and settings. At 1080p Low, the average of 212 FPS shows that the CPU can feed the GPU at very high frame rates. The i7-14700F's PassMark single-thread score of 4257 and PassMark multithread score of 41317 support this capability. At 4K Ultra, where the average is 77 FPS, the CPU is likely idle more often, as the GPU's rendering load dominates. The data suggests that at 1080p, the CPU and GPU are more evenly balanced, while at 4K, the GPU is the clear limiting factor.
The settings scaling also reveals component roles. At 1080p, increasing from Low to Ultra reduces FPS from 212 to 102, a 52% reduction. At 4K, the same settings change reduces FPS from 160 to 77, a 52% reduction as well. This proportional similarity indicates that the GPU is consistently handling the additional graphical work, with the CPU maintaining adequate frame delivery across all scenarios.
The Verdict
The verdict for the Intel Core i7-14700F and NVIDIA GeForce RTX 4070 in Overpower is clear: this combination can run the game at all tested resolutions and presets. The playable threshold is 60 FPS, and every configuration in the measured data exceeds this value. At 3840x2160, the Ultra preset averages 77 FPS, the High preset averages 93 FPS, Medium averages 100 FPS, and Low averages 160 FPS. All of these are above the 60 FPS threshold, making 4K fully playable with headroom.
At 2560x1440, the performance is even stronger. Ultra averages 91 FPS, High averages 109 FPS, Medium averages 118 FPS, and Low averages 189 FPS. This means that 1440p users can comfortably enable the highest settings and still maintain a smooth experience. At 1920x1080, the combination excels, with Ultra averaging 102 FPS, High averaging 123 FPS, Medium averaging 132 FPS, and Low averaging 212 FPS.
The verdict by resolution indicates that the best settings — defined as the most demanding preset that stays at or above 60 FPS — are Ultra at every resolution. At 4K, the average FPS at Ultra is 77, which provides a 17 FPS margin over the threshold. At 1440p, the margin is 31 FPS, and at 1080p, it is 42 FPS. This combination not only meets the playability standard but does so with substantial headroom, making it suitable for high-refresh monitors at lower resolutions and for 4K gaming on standard 60 Hz displays.
Best Settings per Resolution
For 1920x1080, the most demanding preset that maintains at least 60 FPS is Ultra, with an average of 102 FPS. This provides a 42 FPS margin over the playable threshold, meaning users can enable all quality options without concern. The Low preset at this resolution averages 212 FPS, which is beneficial for competitive play on high-refresh monitors, but Ultra remains the optimal choice for visual quality.
At 2560x1440, Ultra is again the best setting, averaging 91 FPS. This is 31 FPS above the 60 FPS threshold, offering a comfortable cushion that accommodates scene complexity and frame time spikes. The Medium preset averages 118 FPS with a minimum of 100 FPS, which is also viable, but Ultra provides the highest visual fidelity while staying well above the playability threshold.
At 3840x2160, Ultra averages 77 FPS, which is 17 FPS above the threshold. This is the smallest margin of the three resolutions, but it still qualifies as fully playable. The High preset averages 93 FPS and Medium averages 100 FPS, both of which offer higher frame rates if users prefer more headroom. However, based on the data, Ultra at 4K is the recommended choice, as it clears the 60 FPS requirement with a 17 FPS buffer.
How This Combo Ranks
The Intel Core i7-14700F and NVIDIA GeForce RTX 4070 ranks 855 out of 3713 tested combinations for Overpower. This places it in the top 23% of all tested systems, indicating that it outperforms the majority of competing hardware configurations. The percentile ranking for the CPU is 91, meaning it outperforms 91% of all CPUs tested, while the GPU's percentile is 81, outperforming 81% of all GPUs.
The combo's rank of 855 is notable given the measured FPS performance. At 1080p Ultra, the 102 FPS average places this system in a strong position for high-refresh gaming. The rank reflects the combination of the CPU's strong multi-threaded performance, evidenced by its Cinebench R23 multicore score of 35122, and the GPU's capable rendering, shown in its 3DMark Steel Nomad DX12 score of 3854. The rank suggests that this system is better suited than 2,858 other tested combos for running Overpower at playable frame rates.
The gap between the CPU and GPU percentiles — 91 versus 81 — indicates that the CPU is relatively stronger than the GPU in this pairing. This means that for Overpower, the GPU is more likely to be the limiting factor, especially at higher resolutions. The data supports this, as the FPS drops from 212 at 1080p Low to 160 at 4K Low, while the CPU's performance remains sufficient to avoid bottlenecking at these frame rates.
Similar Performance Alternatives
The nearest rivals for the Intel Core i7-14700F provide context for CPU performance. The Intel Xeon 6505P has an average benchmark score of 53701, which is 0.2% higher than the i7-14700F's average score of 53620. The Intel Xeon Phi 7290 scores 53469, a 0.3% difference. The AMD Ryzen 9 7900X scores 53288, 0.6% lower, and the AMD EPYC 7313P scores 53206, 0.8% lower. These rivals would produce nearly identical CPU-bound performance in Overpower, as the differences are within 1%.
For the GPU, the NVIDIA GeForce RTX 4070's nearest rivals show similar proximity. The NVIDIA Tesla P4 has an average score of 37628, just 0.1% below the RTX 4070's 37648. The AMD Radeon RX Vega 56 scores 37507, 0.4% lower. The NVIDIA GeForce RTX 4080 Mobile scores 38135, which is 1.3% higher, and the AMD Radeon PRO W6400 scores 37157, 1.3% lower. These GPUs would deliver frame rates within a few percentage points of the RTX 4070 in Overpower, meaning users with these alternatives would see similar FPS averages.
When combined, these CPU and GPU alternatives suggest that systems built with the Intel Xeon 6505P or AMD Ryzen 9 7900X paired with a Tesla P4 or RX Vega 56 would produce performance closely matching the i7-14700F and RTX 4070. The differences in average benchmark scores are minimal, and in a game like Overpower, the FPS variation would be within the margin of error. The RTX 4080 Mobile, with its 1.3% higher score, might edge out the RTX 4070 by a couple of frames, but the practical difference is negligible for gameplay.