Overpower

The Intel Core i7-14700F paired with the NVIDIA GeForce RTX 3080 delivers a decisive answer for Overpower: every tested resolution, from 1920x1080 up to native 3840x2160, clears the 60 FPS playable threshold at every preset including Ultra. The data shows this combo ranking within the top portion of tested configurations for this 2023 action title, with a comfortable frame-rate cushion at maximum settings.

How This Combo Ranks

Across the 3713 hardware combinations tested for Overpower, the Core i7-14700F + RTX 3080 pairing sits at rank 1012. That places it in the top quartile of tested combos — roughly the 27th percentile from the top — which lines up sensibly with the strengths and limits of each component. The processor side is the stronger of the two: the i7-14700F sits in the 91st percentile versus all CPUs in the database, with an average benchmark score of 53620. Its nearest rivals by aggregate score are the Intel Xeon 6505P at 53701 (a deltaPct of -0.2), the Intel Xeon Phi 7290 at 53469 (0.3), the AMD Ryzen 9 7900X at 53288 (0.6), and the AMD EPYC 7313P at 53206 (0.8). In other words, CPUs within a fraction of a percent of this chip's overall throughput bracket it on both sides.

The GPU drags the pairing's ceiling down slightly. The RTX 3080 occupies the 68th percentile versus all GPUs, with an average benchmark score of 23172, and its nearest rivals are an eclectic set: the NVIDIA P106-100 at 23249 (-0.3), the AMD Radeon Pro Vega 16 at 23250 (-0.3), the AMD Radeon RX 6600M at 23273 (-0.4), and the AMD Radeon R9 M290X at 23276 (-0.4). The combo's rank of 1012 of 3713 therefore reflects a high-end CPU compensating for a graphics card that is good but no longer at the front of the pack — an end-of-life Ampere part facing newer competition.

CPU and GPU Roles

The resolution scaling in the measured data tells a clear story about which component governs performance in Overpower. At 1920x1080 Ultra, the combo averages 96.4 FPS; moving to 2560x1440 Ultra drops that to 88.7 FPS, and native 3840x2160 Ultra falls further to 74.6 FPS. That is a decline of roughly 23 percent from 1080p to 2160p — a real but comparatively gentle slide, indicating the RTX 3080 is being pushed progressively harder as pixel count rises but is never fully saturated to the point of collapse.

The more telling signal comes from the preset spread within each resolution. At 1920x1080, Low delivers 200.3 FPS while Ultra delivers 96.4 FPS — slightly more than a doubling of frame rate when visual load is stripped away. That gap means the engine is not CPU-limited at 1080p; if the i7-14700F were the bottleneck, lowering settings would not unlock such a large uplift. The same pattern holds at 4K, where Low runs at 154.3 FPS against Ultra's 74.6 FPS. Overpower is therefore GPU-bound at all three tested resolutions on this hardware, and the i7-14700F — with its strong per-core results such as a Cinebench R23 single-core score of 4958 and Geekbench single-core score of 2429 — keeps frame delivery well fed at every setting tier.

Best Settings per Resolution

Because every preset clears the 60 FPS threshold at every resolution, the best setting is simply the most demanding one available:

• 1920x1080 — Ultra: 96.4 FPS average. A 60 percent cushion over the playable threshold.
• 2560x1440 — Ultra: 88.7 FPS average, nearly 48 percent above the threshold.
• 3840x2160 — Ultra: 74.6 FPS average, still comfortably above 60 FPS.

Players who want higher frame rates for high-refresh displays can step down: Medium at 1080p runs at 128.9 FPS, and Low reaches 200.3 FPS. But no compromise is required to hit the 60 FPS bar — maximum fidelity is on the table across the board.

Similar Performance Alternatives

Substituting CPUs from the i7-14700F's nearest rivals should produce near-identical behavior in Overpower, since the game is GPU-bound on this pairing. The Intel Xeon 6505P (avgScore 53701, deltaPct -0.2) and Intel Xeon Phi 7290 (53469, 0.3) sit within a fraction of a percent of the i7-14700F's aggregate score, as do the AMD Ryzen 9 7900X (53288, 0.6) and AMD EPYC 7313P (53206, 0.8). Any of these should keep the RTX 3080 fed in a game where the CPU is not the limiting factor.

On the graphics side, the database lists the NVIDIA P106-100 (23249, -0.3), AMD Radeon Pro Vega 16 (23250, -0.3), AMD Radeon RX 6600M (23273, -0.4), and AMD Radeon R9 M290X (23276, -0.4) as aggregate-score equivalents of the RTX 3080. It is importantly these rivals match on overall benchmark averages rather than guaranteed game-specific parity — architectural differences mean results in Overpower specifically may vary — but by the database's ranking methodology they represent the nearest performance neighborhood.

FAQ

Q: Can the i7-14700F + RTX 3080 run Overpower at 4K with Ultra settings?

A: Yes. At 3840x2160 Ultra the combo averages 74.6 FPS, which is above the 60 FPS playable threshold. All four presets — Low, Medium, High, and Ultra — are playable at 4K.

Q: What is the highest frame rate recorded for this combo in Overpower?

A: 200.3 FPS average, at 1920x1080 on the Low preset.

Q: Is the CPU or the GPU the bottleneck in this game?

A: The GPU. Frame rates vary substantially when changing presets (96.4 to 200.3 FPS at 1080p), which indicates the RTX 3080 is the limiting component, not the i7-14700F.

Q: How does this combo rank against other tested pairings for Overpower?

A: It ranks 1012 out of 3713 tested combinations, placing it in the upper quarter of results.

Q: Does dropping from 1440p to 1080p at Ultra settings meaningfully raise frame rates?

A: Yes. Ultra goes from 88.7 FPS at 2560x1440 to 96.4 FPS at 1920x1080, an increase of roughly 8 FPS.

Q: What CPU benchmarks indicate the i7-14700F is a strong match for this GPU?

A: The chip scores 35122 in Cinebench R23 multi-core, 4958 in R23 single-core, 19620 in Geekbench multi-core, and 41317 in PassMark multithreaded testing, placing it in the 91st percentile of all CPUs.

The Verdict

Yes — this PC runs Overpower without qualification. The verdict-by-resolution data confirms that every preset from Low through Ultra is playable at all three tested resolutions, with Ultra as the best setting everywhere: 96.4 FPS average at 1920x1080, 88.7 FPS at 2560x1440, and 74.6 FPS at 3840x2160. Even the worst measured result — 4K Ultra — sits nearly 25 percent above the 60 FPS threshold. For a player whose target is smooth 60-plus gameplay, this pairing over-delivers; only those chasing very high refresh rates at 1080p would need to step below Ultra.

Measured FPS Breakdown

All figures are measured average FPS for the Intel Core i7-14700F + NVIDIA GeForce RTX 3080 in Overpower. Minimum and maximum frame rates were not recorded in this dataset.

3840x2160 (4K)

• Low: 154.3 FPS
• Medium: 97.4 FPS
• High: 89.5 FPS
• Ultra: 74.6 FPS

2560x1440 (QHD)

• Low: 182.8 FPS
• Medium: 115.5 FPS
• High: 105.4 FPS
• Ultra: 88.7 FPS

1920x1080 (Full HD)

• Low: 200.3 FPS
• Medium: 128.9 FPS
• High: 119.9 FPS
• Ultra: 96.4 FPS

The pattern across the table is consistent: each preset step up costs roughly 10 to 20 percent of the average frame rate, and each resolution step up costs a similar margin, with no cliff-edge anywhere in the matrix. That smooth degradation is characteristic of a well-balanced pairing operating comfortably inside its performance envelope rather than at the edge of it.