Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Overpower
Action 2023

Overpower

80%
Great Match Your system meets recommended requirements.

Performance

1080p (Full HD)

Low 1080p Measured
154 FPS
Ultra 1080p Measured
75 FPS

1440p (2K / QHD)

Low 1440p Measured
138 FPS
Ultra 1440p Measured
65 FPS

4K (Ultra HD)

Low 4K Measured
119 FPS
Ultra 4K Measured
58 FPS
11ms Frame Time
17ms Input Latency
4K Best Resolution

Requirements Check

Processor
Required 37,513
Your CPU 46,881
Graphics Card
Required 27,382
Your GPU 17,639

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 58 67 72 119
1440p QHD 65 79 86 138
1080p Full HD 75 91 97 154

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 91
1920x1080 Low 154
1920x1080 Medium 97
1920x1080 Ultra 75
2560x1440 High 79
2560x1440 Low 138
2560x1440 Medium 86
2560x1440 Ultra 65
3840x2160 High 67
3840x2160 Low 119
3840x2160 Medium 72
3840x2160 Ultra 58

Performance Analysis: Overpower on Your System

The Intel Core i7-13700K paired with the NVIDIA GeForce RTX 4060 delivers a playable experience in Overpower across every tested resolution, but the margin shrinks considerably at 4K Ultra. Measured frame rates show the combo hitting 67.2 FPS at 4K High, 64.8 FPS at 1440p Ultra, and 74.8 FPS at 1080p Ultra, which places the system in the 53rd percentile of all tested combinations when sorted by performance. The data set for this pairing is entirely measured, and the results indicate a consistent ability to clear the 60 FPS threshold at most settings, with only the most demanding 4K Ultra preset falling below that mark.

Measured FPS Breakdown

At 3840x2160, the RTX 4060 and Core i7-13700K produce an average of 118.7 FPS on Low settings, which is the highest result at this resolution. Medium settings drop the average to 71.6 FPS, while High settings yield 67.2 FPS. The Ultra preset is the only configuration at 4K that fails to reach the 60 FPS playable threshold, with an average of 57.8 FPS. The spread between Low and Ultra at 4K is 60.9 FPS, indicating that the GPU’s rendering load scales sharply with preset quality. No minimum or maximum frame rate data is available in the measured results, so the analysis relies on average FPS alone to characterize performance.

Moving to 2560x1440, the same pattern holds but with higher overall averages. Low settings produce 138.2 FPS, Medium reaches 85.6 FPS, High delivers 78.9 FPS, and Ultra stays above the playable threshold at 64.8 FPS. The delta between Low and Ultra at 1440p is 73.4 FPS, which is a larger absolute gap than at 4K, though the relative drop from Low to Ultra is similar. All four presets at 1440p clear 60 FPS, with Ultra having the smallest margin of 4.8 FPS above the threshold.

At 1920x1080, the combo performs best overall. Low settings average 154.2 FPS, Medium reaches 97.2 FPS, High delivers 91.2 FPS, and Ultra stays at 74.8 FPS. The gap between Low and Ultra at 1080p is 79.4 FPS, the largest absolute difference across all resolutions. Every preset at 1080p exceeds 60 FPS, and even the most demanding setting provides a comfortable cushion of 14.8 FPS above the threshold. The data shows a clear trend: as resolution decreases, the average FPS increases for every preset, which is consistent with the GPU being the primary limiting factor at higher pixel counts.

Across all three resolutions, the Low preset always delivers the highest frame rates, while Ultra always delivers the lowest. Medium and High sit between these extremes, with High typically closer to Medium than to Low. For example, at 1440p, Medium averages 85.6 FPS and High averages 78.9 FPS, a difference of 6.7 FPS, while High to Ultra drops 14.1 FPS. This suggests that the visual quality settings between Medium and High have a relatively modest performance cost compared to the jump from High to Ultra.

Best Settings per Resolution

For 3840x2160, the most demanding preset that stays at or above 60 FPS is High, with an average of 67.2 FPS. Ultra falls short at 57.8 FPS, so High is the recommended ceiling for 4K play. Medium also clears the threshold at 71.6 FPS, but High provides the highest quality while maintaining playability. The data indicates that 4K High is the optimal balance for this resolution, offering a 7.2 FPS buffer above the playable threshold.

At 2560x1440, all four presets meet the 60 FPS requirement, making Ultra the best settings choice. Ultra averages 64.8 FPS, which is above the threshold but leaves only a 4.8 FPS margin. High averages 78.9 FPS, Medium 85.6 FPS, and Low 138.2 FPS, so users who prefer extra headroom can drop to High, but Ultra is technically playable. The verdict data confirms that Ultra is the best settings at 1440p because it is the highest preset with an average above 60 FPS.

At 1920x1080, Ultra is likewise the best settings, averaging 74.8 FPS. This provides a 14.8 FPS margin over the playable threshold, which is more comfortable than the 1440p Ultra margin. High averages 91.2 FPS, Medium 97.2 FPS, and Low 154.2 FPS, but Ultra remains the most demanding preset that stays above 60 FPS. The recommendation across all resolutions is to use the highest preset that maintains playability, which is High at 4K and Ultra at both 1440p and 1080p.

How This Combo Ranks

The Intel Core i7-13700K and NVIDIA GeForce RTX 4060 combination ranks 1978 out of 3713 tested combos in Overpower, which places it in the 53.3rd percentile of all systems evaluated. This means the combo performs slightly better than the median tested configuration, though it is not near the top of the leaderboard. The rank reflects the combined performance of both components in this specific game, and the measured frame rates support the notion of a mid-pack result. Given that the combo rank is based on data from a large pool of 3713 configurations, a rank of 1978 indicates a balanced but not exceptional standing.

The percentile field for the CPU shows that the Core i7-13700K outperforms 89% of all tested CPUs in general benchmarks, while the GPU’s percentile is 61% relative to all tested GPUs. This disparity suggests that the CPU is a stronger component than the GPU in isolation, which is consistent with the observed frame rate scaling in Overpower: the GPU becomes the bottleneck at higher resolutions and presets. The combo rank of 1978 is therefore driven more by the GPU’s mid-tier standing than by the CPU’s high-tier performance. In practical terms, the combo sits in the upper half of tested systems, but it does not threaten the top performers.

Similar Performance Alternatives

Looking at the nearest rivals for the CPU, the AMD Ryzen 9 5900 has an average benchmark score of 46971, which is 0.2% lower than the Core i7-13700K’s average score of 46881. The AMD Ryzen AI 9 HX PRO 375 scores 47022, 0.3% higher than the i7-13700K, while the AMD Ryzen 9 7845HX scores 46654, 0.5% lower, and the Intel Xeon w3-2535 scores 46653, also 0.5% lower. These four processors are the closest performance neighbors to the i7-13700K in general benchmarks, with deltas ranging from -0.5% to +0.5%. In Overpower, any of these CPUs would likely produce similar CPU-bound frame rates, though the GPU remains the dominant factor at most settings.

For the GPU, the nearest rivals are the AMD Radeon HD 7790 with an average score of 17666 (0.2% higher than the RTX 4060’s 17639), the AMD Radeon 780M at 17588 (0.3% lower), the AMD Radeon Pro 560 at 17551 (0.5% lower), and the AMD Radeon Pro 460 at 17509 (0.7% lower). These deltas are all within 1% of the RTX 4060’s average benchmark score, indicating that these GPUs would deliver nearly identical frame rates in Overpower. The Radeon 780M is an integrated solution, while the Radeon Pro 560 and 460 are older workstation parts, but their benchmark proximity suggests similar raw performance. A system built with the Core i7-13700K and any of these rival GPUs would behave similarly to the tested combo, with frame rates differing by less than 1% on average.

CPU and GPU Roles

The data shows that the GPU plays a larger role in determining frame rates as resolution increases. At 1920x1080, the average FPS ranges from 154.2 on Low to 74.8 on Ultra, a total drop of 79.4 FPS across presets. At 2560x1440, the same preset change results in a drop from 138.2 FPS to 64.8 FPS, a span of 73.4 FPS. At 3840x2160, the span narrows to 60.9 FPS, from 118.7 FPS on Low to 57.8 FPS on Ultra. This narrowing indicates that at 4K, the GPU is so heavily loaded that even Low settings cannot fully relieve the bottleneck, whereas at 1080p, the GPU has enough headroom to show larger differences between presets.

The CPU’s influence can be inferred from the frame rates at Low settings, which are the least GPU-bound. At 1080p Low, the combo reaches 154.2 FPS, while at 1440p Low it hits 138.2 FPS, and at 4K Low it drops to 118.7 FPS. The relatively small difference between 1080p Low and 1440p Low (16 FPS) compared to the difference between 1440p Low and 4K Low (19.5 FPS) suggests that the CPU can sustain high frame rates even as resolution increases, but the GPU’s pixel throughput becomes limiting at 4K. The Core i7-13700K’s strong single-thread and multi-thread scores, such as 2116 in Cinebench R23 single-core and 30745 in multi-core, indicate ample CPU headroom for this action game.

At Ultra settings, the GPU is the clear bottleneck across all resolutions. The RTX 4060’s 8 GB of GDDR6 memory and 128-bit bus width, with a bandwidth of 272.0 GB/s, are modest by modern standards, and the measured frame rates confirm that Ultra presets stress the GPU heavily. The verdict data supports this interpretation: at 4K, only High and below are playable, while at 1440p and 1080p, Ultra clears 60 FPS but with decreasing margins. The scaling between resolutions at the same preset further illustrates the GPU’s role. For example, Ultra averages 74.8 FPS at 1080p, 64.8 FPS at 1440p, and 57.8 FPS at 4K, showing a consistent decline as pixel count rises.

The Verdict

Can this PC run Overpower? The answer is yes, with caveats at 4K Ultra. According to the verdictByResolution data, at 3840x2160, the playable settings are High, Low, and Medium, with High being the best settings at 67.2 FPS. Ultra is not playable at 4K because it averages 57.8 FPS, below the 60 FPS threshold. At 2560x1440, all four presets are playable, and Ultra is the best settings with an average of 64.8 FPS. At 1920x1080, every preset is playable, and Ultra again is the best settings, averaging 74.8 FPS. The system therefore clears 60 FPS at all resolutions except 4K Ultra, and even that setting is only 2.2 FPS short of the threshold.

For users targeting 4K, the recommendation is to use High settings, which provide 67.2 FPS and a 7.2 FPS buffer over the playable threshold. For 1440p and 1080p, Ultra is the highest playable preset, with margins of 4.8 FPS and 14.8 FPS, respectively. The combo’s rank of 1978 out of 3713 indicates that it is a mid-pack performer, but the measured frame rates show that it is sufficient for smooth gameplay in Overpower at most settings. The GPU is the limiting factor at high resolutions and presets, while the CPU provides enough headroom to avoid becoming a bottleneck. Overall, this system is playable for the vast majority of configurations, with only the most demanding 4K Ultra preset falling just below the 60 FPS line.