Instant compatibility check with FPS benchmarks and optimization tips
Overpower
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Your GPU supports ray tracing.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 99 | 119 | 128 | 205 |
| 1440p QHD | 116 | 140 | 151 | 241 |
| 1080p Full HD | 130 | 157 | 169 | 263 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Overpower on Your System
The Intel Core i7-12700KF and NVIDIA GeForce RTX 4080 combination delivers a remarkably high-performance baseline for Overpower, with benchmark results indicating that this pairing clears the 60 FPS playability threshold with substantial headroom at every tested resolution and preset. The data shows a system that is not merely capable, but one that consistently operates at frame rates typically reserved for high-refresh-rate displays, even when pushed to the most demanding graphical settings available.
Best Settings per Resolution
The measured FPS data reveals that this hardware combination is powerful enough to run Overpower at its maximum "Ultra" preset while maintaining an average frame rate well above the 60 FPS playability threshold at all three standard resolutions. The most demanding preset that keeps the average FPS at or above 60 is Ultra across the board, which is the highest settings tier available in the data.
At 3840x2160 (4K), the Ultra preset achieves an average of 99 FPS. This is a significant margin above the 60 FPS threshold, indicating that even at 4K resolution, the system is not fully taxed by the game's maximum settings. The data shows a clear progression from the High preset at 119 FPS average, through Medium at 128 FPS, and Low at 205 FPS, but Ultra at 99 FPS remains the optimal choice for image quality without sacrificing smooth gameplay.
At 2560x1440 (1440p), the Ultra preset delivers an average of 116 FPS. The scaling here is consistent with the 4K results, showing that the RTX 4080 has ample compute headroom at this resolution. The High preset reaches 140 FPS, Medium hits 151 FPS, and Low tops out at 241 FPS, but the Ultra setting at 116 FPS provides the best balance of visual fidelity and performance for users prioritizing graphical quality.
At 1920x1080 (1080p), the Ultra preset achieves an average of 130 FPS. This is the lowest average FPS among the Ultra settings across the three resolutions, which is counterintuitive given that lower resolutions typically produce higher frame rates. The data shows this anomaly warrants closer inspection: High runs at 157 FPS, Medium at 169 FPS, and Low at 263 FPS. The 1080p Ultra result being lower than the 1440p Ultra result suggests the CPU may be introducing a bottleneck at this resolution, a topic explored further in the next section.
CPU and GPU Roles
The frame rate scaling across resolutions and presets provides insight into which component—CPU or GPU—is the primary limiting factor in Overpower. The data indicates that the RTX 4080 is the dominant component at higher resolutions, while the i7-12700KF becomes more relevant at lower resolutions.
Looking at the Ultra preset progression: at 4K the average FPS is 99, at 1440p it rises to 116, and at 1080p it falls to 130. The expected pattern would be a steady increase in FPS as resolution decreases, since the GPU workload diminishes. The observed pattern—where 1080p Ultra (130 FPS) is only 12% higher than 1440p Ultra (116 FPS), while 1440p Ultra is 17% higher than 4K Ultra (99 FPS)—suggests diminishing returns as resolution drops. The RTX 4080's pixel throughput capabilities, rated at 280.6 GPixel/s, are likely sufficient to handle 4K workloads, but at 1080p the CPU's frame production limits become apparent.
This hypothesis is reinforced by the Medium preset data, which includes min and max FPS figures. At 4K Medium, the average is 128 FPS with min 109 and max 147. At 1440p Medium, the average is 151 FPS with min 128 and max 173. At 1080p Medium, the average is 169 FPS with min 144 and max 194. The variance between min and max FPS widens as resolution decreases: a 38 FPS spread at 4K, 45 FPS at 1440p, and 50 FPS at 1080p. This increasing variance at lower resolutions is consistent with CPU involvement in frame pacing, where the i7-12700KF's 12 cores and 20 threads are being tasked with preparing frames faster than the GPU can render them at high settings.
The i7-12700KF's benchmark scores support this interpretation. Its 3DMark 16-thread score of 9282 and max-thread score of 9983 indicate strong multi-threaded capability, while its single-thread score of 1043 suggests it can handle per-frame logic efficiently. However, the data implies that at 1080p, the CPU's frame generation ceiling is being approached, which is why the Ultra preset at 1080p (130 FPS) does not exceed the 1440p Ultra result by a larger margin. The GPU, by contrast, shows its strength in the 4K results, where the RTX 4080's 48.74 TFLOPS FP32 compute and 716.8 GB/s memory bandwidth are fully utilized.
Similar Performance Alternatives
The nearestRivals data provides context for how other hardware would behave in this system. For the CPU, the i7-12700KF's average benchmark score of 35365 places it nearly identical to several alternatives. The Intel Core i7-13700T scores 35403, a delta of -0.1%, meaning it would deliver virtually indistinguishable performance in Overpower. The Intel Core i5-13600T scores 35305, a delta of 0.2%, also functionally equivalent. The Intel Core 7 213PE scores 35428 (-0.2%), and the Intel Core i7-12700K scores 35287 (0.2%). All four rivals are within a fraction of a percent of the i7-12700KF, so swapping in any of these CPUs would produce nearly identical frame rates in this game.
For the GPU, the RTX 4080's average benchmark score of 54247 is closely matched by the NVIDIA GeForce RTX 4080 SUPER at 54209 (0.1% delta). The AMD Radeon Pro W5700X scores 54828 (-1.1%), the AMD Radeon RX 6750 GRE 12 GB scores 55698 (-2.6%), and the AMD Radeon 8060S scores 55757 (-2.7%). These deltas are all small, meaning any of these GPUs would produce similar average FPS in Overpower. However, it is notable that the two AMD competitors have scores slightly higher than the RTX 4080, suggesting they might edge out a few extra frames per second in GPU-bound scenarios, though the differences are within a margin that would be imperceptible in actual gameplay.
The Verdict
Can this PC run Overpower? The verdictByResolution data is unequivocal: yes, at every resolution and preset combination tested. The playableSettings lists for all three resolutions include High, Low, Medium, and Ultra, meaning every setting tier clears the 60 FPS playable threshold.
At 3840x2160, the best settings are Ultra with an average FPS of 99. This provides a 65% margin above the 60 FPS threshold, so users can enjoy maximum graphical quality at 4K without concerns about drops below playable levels. At 2560x1440, Ultra achieves 116 FPS, a 93% margin, offering headroom for high-refresh-rate monitors in the 100-120 Hz range. At 1920x1080, Ultra reaches 130 FPS, a 117% margin, which is suitable for 120 Hz displays but may not fully saturate 144 Hz or higher refresh rate panels.
The data indicates that this system is overqualified for Overpower at standard monitor refresh rates. Users with 60 Hz displays can run Ultra at any resolution with massive headroom. Those with 144 Hz displays will find that 1080p and 1440p Ultra settings deliver average FPS close to their refresh rate, though the 1080p result at 130 FPS falls short of 144 FPS, and the Medium preset at 169 FPS would be required to fully utilize a 144 Hz panel at that resolution.
FAQ
Q: What is the highest graphical preset that maintains at least 60 FPS at 4K resolution?
A: The Ultra preset at 3840x2160 achieves an average of 99 FPS, which is well above the 60 FPS threshold. All four settings—Low (205 FPS), Medium (128 FPS), High (119 FPS), and Ultra (99 FPS)—are playable at 4K.
Q: Does this system show any signs of CPU bottlenecking in Overpower?
A: Yes. The 1080p Ultra average of 130 FPS is only 14 FPS higher than the 1440p Ultra average of 116 FPS, which is a smaller gain than expected when reducing resolution. The Medium preset's FPS spread (max minus min) widens from 38 FPS at 4K to 50 FPS at 1080p, suggesting the i7-12700KF's frame generation limits become more influential at lower resolutions.
Q: How does the RTX 4080 compare to its closest GPU rivals in this game?
A: The RTX 4080's average benchmark score of 54247 is nearly identical to the RTX 4080 SUPER (54209, 0.1% delta). The AMD Radeon Pro W5700X (54828, -1.1%), AMD Radeon RX 6750 GRE 12 GB (55698, -2.6%), and AMD Radeon 8060S (55757, -2.7%) all have slightly higher scores, but the differences are small enough that in-game frame rates would be effectively the same.
Q: What is the best settings choice for a 144 Hz monitor at 1440p?
A: The Ultra preset at 2560x1440 averages 116 FPS, which is below 144 FPS. To fully utilize a 144 Hz display, the Medium preset at 151 FPS or the High preset at 140 FPS would be required, though the High option at 140 FPS still falls short of the refresh rate target.
Q: Is the i7-12700KF's performance significantly different from the i7-12700K?
A: No. The i7-12700KF's average benchmark score is 35365, while the i7-12700K scores 35287, a delta of 0.2%. This difference is negligible and would not produce a measurable difference in Overpower frame rates.
Q: How does this combo rank among all tested hardware combinations for Overpower?
A: This combination ranks 232 out of 3713 tested combos, placing it in the top 6% of all systems tested for this game. This indicates that the i7-12700KF and RTX 4080 pairing is among the more capable configurations for Overpower, though not at the very top tier.
How This Combo Ranks
The comboRankInGame data places this specific CPU-GPU pairing at position 232 out of 3713 tested combinations. This is a strong result, indicating that the i7-12700KF and RTX 4080 together perform in the top 6.2% of all systems evaluated for Overpower. The rank reflects the combined capability of the CPU and GPU, and given the measured FPS data showing 60+ FPS at all settings and resolutions, this high ranking aligns with the actual gameplay experience.
The rank suggests that while this system is not at the absolute pinnacle of performance—the top 231 combos likely feature newer, more powerful components—it is firmly in the upper echelon. The data implies that users with this configuration will have a smooth experience in Overpower, with the ability to max out settings at 4K and still maintain nearly 100 FPS on average. The ranking also contextualizes the performance relative to other potential builds, showing that this combo outranks roughly 94% of all tested alternatives, making it a robust choice for this game.
Measured FPS Breakdown
The complete measured FPS data for this combo is as follows:
3840x2160 (4K)
- Low: 205 FPS average
- Medium: 128 FPS average, 109 FPS min, 147 FPS max
- High: 119 FPS average
- Ultra: 99 FPS average
2560x1440 (1440p)
- Low: 241 FPS average
- Medium: 151 FPS average, 128 FPS min, 173 FPS max
- High: 140 FPS average
- Ultra: 116 FPS average
1920x1080 (1080p)
- Low: 263 FPS average
- Medium: 169 FPS average, 144 FPS min, 194 FPS max
- High: 157 FPS average
- Ultra: 130 FPS average
The Medium preset is the only settings tier with recorded min and max FPS values, providing insight into frame time consistency. At 4K, the spread is 38 FPS (109 to 147), at 1440p it is 45 FPS (128 to 173), and at 1080p it is 50 FPS (144 to 194). The increasing spread at lower resolutions again points to CPU influence on frame pacing. The min FPS values at all resolutions and Medium settings remain well above the 60 FPS threshold, with the lowest recorded min being 109 FPS at 4K. This indicates that even in demanding scenes, the system does not experience significant frame drops that would compromise playability.