Overpower

The Intel Core i7-12700K paired with the Intel Arc B370 presents a unique case for running Overpower. The CPU is a high-end desktop part with substantial multi-threaded capability, while the GPU is a low-power integrated-class solution. The recorded data shows that this combination is severely limited by the graphics processor, resulting in a system that only achieves playable frame rates at the lowest settings and resolution tested.

Measured FPS Breakdown

The benchmark results for Overpower are consistent across the three tested resolutions, with the Arc B370 acting as the primary bottleneck. The data reveals a clear pattern: the frame rate scales directly with resolution and graphics preset, with the system struggling to maintain high averages.

At 3840x2160 (4K), the results are poor across all presets. On Low settings, the system averages 49 FPS, which is short of the 60 FPS threshold. Moving to Medium drops the average to 31 FPS, with a recorded minimum of 26 FPS and a maximum of 35 FPS. High settings yield an average of 28 FPS, and Ultra settings bring the average down to 24 FPS. None of these 4K configurations approach playable performance.

At 2560x1440 (1440p), the situation improves slightly but remains below the playable threshold. The Low preset averages 58 FPS, which is just 2 FPS short of the 60 FPS target. Medium settings average 36 FPS, with a minimum of 31 FPS and a maximum of 42 FPS. High settings average 34 FPS, and Ultra settings average 28 FPS. The data indicates that 1440p is not viable for a smooth experience, even on the lowest settings.

At 1920x1080 (1080p), the system finally finds a playable configuration. On Low settings, the average frame rate reaches 65 FPS, comfortably clearing the 60 FPS threshold. This is the only preset and resolution combination that achieves playability. Medium settings drop to an average of 41 FPS, with a minimum of 34 FPS and a maximum of 47 FPS. High settings average 38 FPS, while Ultra settings average 31 FPS. The performance delta between Low and Medium at 1080p is substantial, a 24 FPS drop, suggesting that the GPU is overwhelmed by even modest increases in visual fidelity.

Similar Performance Alternatives

The database records the CPU and GPU separately, and the nearest rivals for each component provide context for where this hardware sits in the broader market. For the Intel Core i7-12700K, the nearest rivals are all within a very tight performance band. The Intel Core i5-13600T has an average benchmark score that is 0.1% lower, the Intel Core i7-12700KF is 0.2% lower, the Intel Core i7-13700T is 0.3% lower, and the Intel Core 5 213PE is 0.4% lower. These negligible deltas mean that swapping the i7-12700K for any of these CPUs would produce virtually identical performance in Overpower, as the game is clearly not CPU-bound in this configuration.

For the Intel Arc B370, the nearest rivals are significantly older and less capable graphics processors. The ATI Mobility Radeon HD 5570 has an average score that is 0.2% lower, the ATI Radeon HD 5770 is 0.5% lower, the AMD Radeon HD 7650M is 0.7% lower, and the AMD FirePro M2000 is 1.4% higher. This grouping places the Arc B370 in the same performance tier as these legacy parts. In practical terms for Overpower, a system with the i7-12700K and any of these rival GPUs would deliver similar frame rates, likely within a few FPS of the recorded 65 FPS at 1080p Low. The data suggests that the GPU is the determining factor for this game, and its nearest rivals are all equally inadequate for higher settings.

How This Combo Ranks

Within the full database of tested combos for Overpower, this specific pairing of the Intel Core i7-12700K and Intel Arc B370 ranks at position 3427 out of 3713 combinations. This places the system in the bottom 8% of all tested configurations. The percentile ranking for the GPU alone is 5%, meaning the Arc B370 performs worse than 95% of all GPUs in the database. The CPU, in contrast, sits at the 84th percentile, indicating strong performance relative to other processors. This wide gap in percentiles underscores the imbalance of the pairing: the CPU is a high-tier component, while the GPU is a bottom-tier component. Consequently, the combo rank reflects the limiting factor, which is the graphics processor. The system is not a viable gaming platform for Overpower at anything beyond the lowest settings.

The Verdict

The recorded data provides a clear answer: this PC can run Overpower, but only under very specific conditions. According to the verdict by resolution, the system achieves playable performance, defined as an average of 60 FPS or higher, only at 1920x1080 with the Low preset. At this setting, the average frame rate is 65 FPS. At 2560x1440, the best recorded average is 58 FPS on Low, which fails to meet the playable threshold. At 3840x2160, the best average is 49 FPS on Low, also below the threshold. The verdict data explicitly lists no playable settings for 4K or 1440p. Therefore, the only way to enjoy Overpower on this hardware is to run it at 1080p with all graphics options set to Low. Any attempt to increase the resolution or preset will result in an average frame rate below 60 FPS, leading to a less smooth experience.

CPU and GPU Roles

The performance scaling in Overpower makes the division of labor between the CPU and GPU very clear. The i7-12700K is a powerful 12-core, 20-thread processor with a boost clock of 5.00 GHz, and its benchmark scores place it in the 84th percentile of all CPUs. The Arc B370, however, is a 25 W integrated-class GPU with only 1280 shading units and a 5th percentile ranking. The game's frame rate is dictated almost entirely by the GPU.

The data supports this conclusion by showing that performance drops are directly tied to GPU workload. Increasing the resolution from 1080p to 1440p at Low settings reduces the average frame rate from 65 FPS to 58 FPS, a 7 FPS loss. Increasing from 1440p to 4K at Low settings further reduces the average to 49 FPS, another 9 FPS loss. These drops are purely a function of the GPU rendering more pixels. Similarly, increasing the preset from Low to Medium at 1080p causes a massive 24 FPS drop, while moving from Medium to High only costs 3 FPS, and High to Ultra costs 7 FPS. The steep drop at the Low to Medium transition indicates that the GPU's limited compute and memory bandwidth are saturated by the extra shading and texture work. The CPU, with its high single-thread score of 1850.5 in Cinebench R23, has ample headroom to feed the GPU. The bottleneck is unequivocally the Arc B370, and the CPU's role is simply to supply data fast enough, which it easily does.

Best Settings per Resolution

Based on the measured FPS data, the optimal settings for each resolution are as follows.

At 1920x1080, the best settings that maintain an average of 60 FPS or higher are the Low preset. The recorded average is 65 FPS. This is the only playable configuration in the entire dataset. The Medium preset, with an average of 41 FPS, is not viable for smooth gameplay.

At 2560x1440, there are no playable settings. The highest average frame rate recorded is 58 FPS on the Low preset, which falls just short of the 60 FPS threshold. The data confirms that no preset at this resolution can reach the playable mark.

At 3840x2160, there are also no playable settings. The highest average is 49 FPS on the Low preset, well below the 60 FPS target.

In summary, the only recommended configuration for Overpower with this hardware is 1080p with the Low preset. The system is not suitable for higher resolutions or more demanding settings, as the Arc B370 simply lacks the necessary rendering power to push the frame rate above the playable threshold. The i7-12700K is more than capable for this game, but the GPU severely limits the overall experience.