Instant compatibility check with FPS benchmarks and optimization tips
Overpower
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Your GPU supports ray tracing.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 50 | 60 | 65 | 103 |
| 1440p QHD | 58 | 70 | 76 | 121 |
| 1080p Full HD | 66 | 79 | 85 | 136 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Overpower on Your System
FAQ
Q: Can the Intel Core i5-9400 and NVIDIA GeForce RTX 5050 maintain 60 FPS in Overpower at 4K?
A: Yes, but only up to High settings. The recorded data shows 60 FPS average at 3840x2160 High, 65 FPS at Medium, and 103 FPS at Low. Ultra drops to 50 FPS, which falls below the 60 FPS playable threshold.
Q: What is the best preset for 1440p with this combo?
A: High settings deliver the highest playable average at 70 FPS. Medium runs at 76 FPS, Low at 121 FPS, and Ultra at 58 FPS, which is just under the playable threshold.
Q: How does the RTX 5050 compare to its nearest GPU rivals in raw benchmark scores?
A: The RTX 5050’s average benchmark score is 21035. Its closest rival, the AMD Radeon RX Vega M GL, scores 21153, which is 0.6% higher. The AMD Radeon RX 5600 XT scores 20713, 1.6% lower. The NVIDIA RTX A4000 Mobile scores 21379, 1.6% higher.
Q: Is the CPU a bottleneck at 1080p Ultra?
A: The data does not indicate a CPU bottleneck. At 1920x1080 Ultra, the combo achieves 66 FPS average, which clears the 60 FPS threshold. The i5-9400’s multi-core score of 6629 in Cinebench R23 suggests adequate headroom for this title.
Q: Which resolution shows the largest FPS jump when lowering settings?
A: 4K shows the largest relative gain. Moving from Ultra (50 FPS) to Low (103 FPS) at 3840x2160 represents a 106% increase. At 1440p, the same settings shift from 58 to 121 FPS, a 109% gain. At 1080p, Ultra to Low goes from 66 to 136 FPS, a 106% improvement.
Q: Does the RTX 5050 support modern graphics APIs needed for this game?
A: Yes. The GPU supports DirectX 12 Ultimate (12_2), OpenGL 4.6, and Vulkan 1.4. This covers the API requirements for a 2023 action title.
CPU and GPU Roles
The data reveals a clear pattern: the GPU dominates performance scaling across resolutions, while the CPU’s role remains consistent. At 1920x1080, the i5-9400’s six cores with six threads and 2.90 GHz base clock (4.10 GHz boost) provide enough throughput for the RTX 5050 to stretch its legs. The GPU’s 2560 shading units and 13.17 TFLOPS FP32 throughput drive frame rates from 66 FPS at Ultra to 136 FPS at Low.
Moving to 2560x1440, the GPU’s workload increases, but the CPU keeps pace. The average FPS drops by roughly 11-15% across presets compared to 1080p: High falls from 79 to 70, Medium from 85 to 76, Low from 136 to 121, and Ultra from 66 to 58. This consistent percentage drop indicates the GPU is the limiting factor, not the CPU. The i5-9400’s L3 cache of 9 MB shared and dual-channel DDR4 memory at 42.7 GB/s bandwidth appear sufficient for this game’s logic.
At 3840x2160, the GPU’s pixel throughput (82.30 GPixel/s) and texture rate (205.8 GTexel/s) become the primary constraint. The RTX 5050’s 8 GB GDDR6 memory on a 128-bit bus with 320.0 GB/s bandwidth handles the higher resolution data, but the average FPS drops sharply: Ultra sits at 50, High at 60, Medium at 65, and Low at 103. The CPU’s benchmark percentile (47th among all CPUs) suggests it is not a weak link; the GPU’s 66th percentile among all GPUs indicates it is the more performance-critical component.
The scaling between presets reinforces this. At every resolution, the jump from Low to Medium is modest (e.g., 103 to 65 FPS at 4K), while the gap from Medium to High is smaller (65 to 60 FPS at 4K). This suggests the game’s higher presets increase GPU memory and shading demands more than CPU logic. The Ultra preset, which drops below 60 FPS at both 4K and 1440p, likely stresses the GPU’s 8 GB frame buffer and 32 ROPs.
Measured FPS Breakdown
1920x1080:
- Low: 136 FPS average (no min/max recorded)
- Medium: 85 FPS average, 72 minimum, 98 maximum
- High: 79 FPS average (no min/max recorded)
- Ultra: 66 FPS average (no min/max recorded)
2560x1440:
- Low: 121 FPS average (no min/max recorded)
- Medium: 76 FPS average, 64 minimum, 87 maximum
- High: 70 FPS average (no min/max recorded)
- Ultra: 58 FPS average (no min/max recorded)
3840x2160:
- Low: 103 FPS average (no min/max recorded)
- Medium: 65 FPS average, 55 minimum, 74 maximum
- High: 60 FPS average (no min/max recorded)
- Ultra: 50 FPS average (no min/max recorded)
The medium preset is the only one with recorded minimum and maximum FPS across all resolutions. At 4K, the minimum of 55 FPS dips below the playable threshold, indicating occasional stutter even though the average clears 60. At 1440p and 1080p, the minimums (64 and 72 respectively) stay above 60, suggesting smoother frame pacing.
The 1080p Ultra result of 66 FPS is notable because it is the only Ultra preset that clears the 60 FPS threshold. The 1440p Ultra average of 58 FPS is close but fails to meet the playable mark. The 4K Ultra average of 50 FPS is the weakest result, likely due to the GPU’s memory bandwidth and ROP count being insufficient for the highest preset at that resolution.
Similar Performance Alternatives
CPU side: The Intel Core i5-9400’s average benchmark score is 2254. Its nearest rivals are all within a fraction of a percent:
- Intel Core i7-1068NG7: 2259 score, 0.2% faster
- Intel Core i3-10305: 2264 score, 0.4% faster
- Intel Core i7-10710U: 2248 score, 0.3% slower
- AMD Ryzen 5 PRO 1500: 2246 score, 0.4% slower
These four CPUs would behave nearly identically in Overpower. The i7-1068NG7 and i3-10305 might squeeze out a frame or two at 1080p, but the differences are within measurement noise. The Ryzen 5 PRO 1500 and i7-10710U could show a marginal dip in minimum FPS during heavy CPU scenes, but the game’s scaling data suggests the GPU remains the primary factor.
GPU side: The RTX 5050’s average benchmark score is 21035. Its nearest rivals:
- AMD Radeon RX Vega M GL: 21153 score, 0.6% faster
- NVIDIA RTX A4000 Mobile: 21379 score, 1.6% faster
- AMD Radeon RX 5600 XT: 20713 score, 1.6% slower
- AMD Radeon HD 8970M: 21237 score, 1.0% faster
The RX Vega M GL and HD 8970M are older architectures, so they may lack some modern feature support even if raw scores are similar. The RTX A4000 Mobile, being a workstation chip, might have different driver optimization for gaming. The RX 5600 XT, with a slightly lower score, would likely land 1-2 FPS lower in each preset. None of these alternatives would change the overall verdict: they would all clear 60 FPS at 1080p High and Ultra, but struggle at 4K Ultra.
How This Combo Ranks
The Intel Core i5-9400 + NVIDIA GeForce RTX 5050 combination ranks 2286 out of 3713 tested combos in Overpower. This places it in the lower half of all configurations, specifically around the 61st percentile (100 - 2286/3713). The ranking reflects that while the GPU is capable (66th percentile among all GPUs), the CPU’s 47th percentile drags the overall combo down slightly.
Compared to other combos in the database, this pairing sits in a crowded mid-field. Combos with faster CPUs (like the i7-1068NG7) but the same GPU would likely rank a few dozen positions higher. Combos with stronger GPUs (like the RTX 5060 or RX 5600 XT paired with a modern CPU) would rank significantly higher. However, the rank also indicates that many tested combos (1427 of them) perform worse, which means this setup is far from the bottom.
The rank of 2286 is consistent with the measured FPS data: it can handle 1080p Ultra and 1440p High, which covers most gaming scenarios. It is not a top-tier combo, but it is not a weak one either. The GPU’s modern architecture (Blackwell 2.0, 5 nm process) and 8 GB VRAM give it an edge over older GPUs with similar raw scores, which may explain why it outperforms some higher-ranked combos in actual game tests.
The Verdict
The data shows that this PC can run Overpower, but the playable settings depend heavily on resolution.
1920x1080: All four presets (Low, Medium, High, Ultra) clear the 60 FPS threshold. Ultra runs at 66 FPS average, which is comfortable. This is the only resolution where the full quality range is available.
2560x1440: High (70 FPS), Medium (76 FPS), and Low (121 FPS) are playable. Ultra falls short at 58 FPS, which is 2 FPS below the playable threshold. The 64 FPS minimum at Medium still clears 60, so frame dips are unlikely to be noticeable.
3840x2160: High (60 FPS), Medium (65 FPS), and Low (103 FPS) are playable. Ultra at 50 FPS is not. The Medium preset’s minimum FPS of 55 dips below 60, so there may be occasional hitches, but the average remains acceptable.
The verdict is clear: for a locked 60 FPS experience, stick to 1080p with any preset, or 1440p with High or lower, or 4K with High or lower. The RTX 5050’s 8 GB VRAM is sufficient for this game at all tested settings, but the 4K Ultra preset likely exceeds its memory and shading capacity.
Best Settings per Resolution
1920x1080: Ultra is the most demanding preset that stays at or above 60 FPS. The recorded average is 66 FPS. This gives players the full visual experience without sacrificing smoothness.
2560x1440: High is the best playable preset, with an average of 70 FPS. Medium runs slightly faster at 76 FPS, but High offers better visual quality while still clearing 60 FPS. Ultra is not recommended since it drops to 58 FPS.
3840x2160: High is the top playable preset, achieving exactly 60 FPS average. Medium runs at 65 FPS, but High provides superior image quality. Ultra is not viable at this resolution due to the 50 FPS average.
For players who prioritize frame rate over visuals, dropping to Low at any resolution yields substantial headroom: 136 FPS at 1080p, 121 FPS at 1440p, and 103 FPS at 4K. The medium preset offers a middle ground, with minimum FPS above 60 at 1080p and 1440p, but a slight dip at 4K. The recorded data suggests that High is the sweet spot for balanced quality and performance across all three resolutions.