Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Overpower
Action 2023

Overpower

29%
Not Recommended Your system may struggle with this game.

Performance

1080p (Full HD)

Low 1080p Measured
118 FPS
Ultra 1080p Measured
57 FPS

1440p (2K / QHD)

Low 1440p Measured
105 FPS
Ultra 1440p Measured
51 FPS

4K (Ultra HD)

Low 4K Measured
89 FPS
Ultra 4K Measured
43 FPS
14.7ms Frame Time
22ms Input Latency
1440p Best Resolution

Requirements Check

Processor
Required 37,513
Your CPU 2,254
Graphics Card
Required 27,382
Your GPU 15,290

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 43 52 56 89
1440p QHD 51 61 66 105
1080p Full HD 57 68 74 118

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 68
1920x1080 Low 118
1920x1080 Medium 74
1920x1080 Ultra 57
2560x1440 High 61
2560x1440 Low 105
2560x1440 Medium 66
2560x1440 Ultra 51
3840x2160 High 52
3840x2160 Low 89
3840x2160 Medium 56
3840x2160 Ultra 43

Performance Analysis: Overpower on Your System

The pairing of Intel's Core i5-9400 with NVIDIA's GeForce RTX 2060 raises an interesting question for Overpower, an action title released in August 2023. The CPU, a six-core, six-thread Coffee Lake Refresh part sitting in the 47th percentile of the database, is paired with a Turing-based GPU that lands in the 58th percentile. Neither component is current, both are end-of-life products, yet the measured data shows this combination holding its own across two of the three tested resolutions. The database ranks this specific pairing at 2933 out of 3713 tested combos in Overpower, which suggests a mid-to-lower placement, but the numbers tell a more nuanced story about where the performance actually lands.

Best Settings per Resolution

The playable threshold used by the database is 60 FPS, and applying that bar to the measured averages produces a clear picture at each resolution.

At 1920x1080, the most demanding preset that stays at or above the threshold is High, delivering an average of 68 FPS. Ultra sits just below the line at 57 FPS, which means the top preset narrowly misses the cut.

At 2560x1440, High again is the ceiling, averaging 61 FPS. Medium clears the bar more comfortably at 66 FPS, and Ultra drops to 51 FPS, falling short.

At 3840x2160, only Low makes the grade, averaging 89 FPS. Medium at 56 FPS and High at 52 FPS both miss the 60 FPS threshold, and Ultra falls to 43 FPS.

There is a consistent pattern here: High is the sweet spot at 1080p and 1440p, while 4K demands a drop all the way to Low to sustain the target frame rate.

CPU and GPU Roles

The scaling data points firmly toward GPU limitation at every resolution. From 1080p to 1440p, Low drops from 118 FPS to 105 FPS, Medium from 74 to 66, High from 68 to 61, and Ultra from 57 to 51. Those are relatively modest declines, and the fact that even Ultra at 1080p cannot reach 60 FPS strongly suggests the RTX 2060, with its 6 GB of GDDR6 and 336 GB/s of memory bandwidth, is the constraint rather than the processor.

The Core i5-9400 contributes a steady baseline. Its single-core results include 94 points in Cinebench R15, 392 in R20, and 935 in R23, alongside multi-core scores of 668, 2784, and 6629 respectively. Geekbench shows 1389 single-core and 5141 multi-core. If the CPU were the bottleneck, lowering the resolution to 1080p would produce much higher frame rates at Low settings; instead, Low at 1080p reaches 118 FPS and the curve flattens quickly as presets climb. The GPU's Passmark G3D score of 14111 and its 3DMark Steel Nomad result of 1242 frame the picture of a card that handles the load at 1080p and 1440p but runs out of headroom at 4K.

FAQ

Q: Can the RTX 2060 run Overpower at 4K?

A: Only at Low settings, where the measured average is 89 FPS. Medium (56 FPS), High (52 FPS), and Ultra (43 FPS) all fall below the 60 FPS threshold.

Q: What is the best-looking preset that holds 60 FPS at 1080p?

A: High, at 68 FPS average. Ultra is close at 57 FPS but does not clear the bar.

Q: Does the Core i5-9400 limit performance in Overpower?

A: The data indicates the GPU is the primary limiter. Frame rates scale down with resolution and preset intensity in a pattern typical of GPU-bound scenarios, and the six-core CPU's benchmark results appear sufficient for the game's demands in this pairing.

Q: How consistent are frame rates at 1440p Medium?

A: The recorded minimum is 56 FPS and the maximum is 76 FPS, around the 66 FPS average. That minimum sits just below the 60 FPS line, indicating occasional dips even at this preset.

Q: Where does this combo rank among tested configurations for Overpower?

A: It ranks 2933 out of 3713 tested combos in the database, a lower-half placement driven mainly by the 4K shortfall.

Q: How does the RTX 2060 compare to nearby GPUs in the database?

A: Its average benchmark score of 15290 is essentially identical to the GTX 580's 15283 (a 0% delta), slightly ahead of the Radeon 680M by 0.1%, and ahead of the RTX 3050 OEM and RX 7600 by 0.6% and 0.8% respectively.

Similar Performance Alternatives

On the CPU side, the Core i5-9400's average score of 2254 places it in a tight cluster of rivals. The Intel Core i7-1068NG7 sits at 2259, only 0.2% ahead, while the Core i7-10710U at 2248 trails by 0.3% and the Ryzen 5 PRO 1500 at 2246 by 0.4%. The Core i3-10305 at 2264 is 0.4% ahead. Any of these processors would deliver effectively indistinguishable CPU-side behavior in Overpower, assuming the GPU remains the limiting factor as the data suggests.

On the GPU side, the alternatives are equally close. The GTX 580's average of 15283 is a 0% delta against the RTX 2060's 15290, the Radeon 680M trails by 0.1%, the RTX 3050 OEM by 0.6%, and the RX 7600 by 0.8%. A system built around any of these graphics solutions would be expected to post Overpower frame rates within a hair of the recorded numbers at every resolution and preset.

Measured FPS Breakdown

All figures below are measured averages from the database. Where minimum and maximum values were recorded, they are noted; entries without min/max data reflect averages only.

1920x1080:

  • Low: 118 FPS average
  • Medium: 74 FPS average, 63 minimum, 85 maximum
  • High: 68 FPS average
  • Ultra: 57 FPS average

2560x1440:

  • Low: 105 FPS average
  • Medium: 66 FPS average, 56 minimum, 76 maximum
  • High: 61 FPS average
  • Ultra: 51 FPS average

3840x2160:

  • Low: 89 FPS average
  • Medium: 56 FPS average, 47 minimum, 64 maximum
  • High: 52 FPS average
  • Ultra: 43 FPS average

The 4K Medium spread deserves attention: a minimum of 47 FPS against a maximum of 64 is a wide band, and it confirms that the 60 FPS average masks uncomfortable dips. At 1440p Medium the band is 56 to 76, tighter but still dipping under the threshold at the low end.

The Verdict

Yes, this PC can run Overpower, with clear qualifications by resolution. At 1920x1080, Low, Medium, and High all clear 60 FPS, with High at 68 FPS as the best playable preset; Ultra at 57 FPS is the only miss. At 2560x1440, the outcome is nearly identical: Low (105), Medium (66), and High (61) are playable, with High as the best settings and Ultra at 51 FPS falling short. At 3840x2160, the verdict changes. Only Low is playable at 89 FPS, while Medium (56), High (52), and Ultra (43) all miss the mark.

For a 60 FPS target, this configuration is a solid 1080p and 1440p performer that requires significant compromise at 4K. Players chasing higher settings at 4K would need to accept averages in the low 50s or below.

How This Combo Ranks

Within the database's Overpower results, the Core i5-9400 plus RTX 2060 combination ranks 2933 out of 3713 tested pairings. That places it in the lower half of the field, which aligns with the 4K results dragging down the overall profile even though 1080p and 1440p performance is respectable. The CPU's 47th percentile standing against all processors and the GPU's 58th percentile standing against all graphics cards sum up the hardware's positioning: a mid-tier pairing from a previous era that still meets the 60 FPS standard at two of three resolutions, provided settings are kept at High or below.