Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Overpower
Action 2023

Overpower

93%
Excellent Match Your system exceeds recommended requirements!

Performance

1080p (Full HD)

Low 1080p Measured
210 FPS
Ultra 1080p Measured
101 FPS

1440p (2K / QHD)

Low 1440p Measured
187 FPS
Ultra 1440p Measured
91 FPS

4K (Ultra HD)

Low 4K Measured
159 FPS
Ultra 4K Measured
75 FPS
8.3ms Frame Time
12ms Input Latency
4K Best Resolution

Requirements Check

Processor
Required 37,513
Your CPU 32,279
Graphics Card
Required 27,382
Your GPU 37,648

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 75 92 100 159
1440p QHD 91 111 115 187
1080p Full HD 101 121 131 210

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 121
1920x1080 Low 210
1920x1080 Medium 131
1920x1080 Ultra 101
2560x1440 High 111
2560x1440 Low 187
2560x1440 Medium 115
2560x1440 Ultra 91
3840x2160 High 92
3840x2160 Low 159
3840x2160 Medium 100
3840x2160 Ultra 75

Performance Analysis: Overpower on Your System

The Intel Core i5-14400F and NVIDIA GeForce RTX 4070 combination delivers a consistently high-refresh experience in Overpower, with measured results at every resolution and preset clearing the 60 FPS threshold. The data shows a system that scales predictably, offering the most demanding visual preset at playable frame rates even at 4K.

Similar Performance Alternatives

Benchmark data places the Intel Core i5-14400F in the 83rd percentile among all CPUs, with an average benchmark score of 32279. The closest matching processors, based on average scores, include the AMD Ryzen 7 PRO 8840U, which scores 32233 and trails by just 0.1%, and the Intel Core i9-11900 at 32226, also 0.2% behind. The AMD Ryzen 7 6800HS posts a score of 32354, which is 0.2% higher than the i5-14400F, while the Intel Core i7-12800H scores 32121, a 0.5% deficit. In practical terms, any of these four processors would deliver near-identical CPU-bound performance in Overpower, meaning users upgrading or building with these alternatives should expect the same frame rate characteristics at the settings tested.

On the graphics side, the RTX 4070 holds the 81st percentile among all GPUs with an average benchmark score of 37648. Its nearest rival is the NVIDIA Tesla P4, which scores 37628, a negligible 0.1% difference. The AMD Radeon RX Vega 56 comes in at 37507, 0.4% lower, while the NVIDIA GeForce RTX 4080 Mobile reaches 38135, outpacing the RTX 4070 by 1.3%. The AMD Radeon PRO W6400 scores 37157, which is 1.3% below. When paired with the i5-14400F, these GPU alternatives would produce nearly identical frame rates in Overpower, with the RTX 4080 Mobile being the only option that would show a measurable, albeit small, improvement.

The system’s combined rank in Overpower is 980 out of 3713 tested combinations, placing it in the top quarter of all tested hardware pairings. This suggests that while there are faster configurations, the i5-14400F and RTX 4070 sit comfortably above the median for this title.

Best Settings per Resolution

At 3840x2160, the most demanding preset that maintains at least 60 FPS is Ultra, which runs at an average of 74.5 FPS. This is the highest visual quality available in the test set, and the data confirms it clears the playable threshold with a comfortable margin. The High preset at this resolution yields 92.4 FPS, while Medium produces 99.7 FPS and Low reaches 159.4 FPS, but Ultra is the recommended choice for maximum fidelity without sacrificing smoothness.

Moving to 2560x1440, the Ultra preset again delivers the best visual experience while staying well above 60 FPS, averaging 90.6 FPS. High runs at 111.2 FPS, Medium at 115.4 FPS, and Low at 187.1 FPS. The 1440p Ultra result shows a 21.6% improvement over the 4K Ultra figure, demonstrating that the RTX 4070 has ample headroom at this resolution for the game’s most demanding settings.

At 1920x1080, Ultra averages 101.3 FPS, which is the best settings choice for full HD. High runs at 121 FPS, Medium at 131.1 FPS, and Low at 209.8 FPS. The 1080p Ultra result is 36% faster than the 4K Ultra result, and the frame rate remains high enough that users could consider capping the frame rate for consistency, though the data does not include any frame rate cap analysis.

CPU and GPU Roles

The measured FPS scaling across resolutions reveals that the RTX 4070 is the primary performance driver in Overpower, with the CPU playing a secondary role. At 1920x1080 Ultra, the system produces 101.3 FPS. Increasing the resolution to 2560x1440 Ultra drops the average to 90.6 FPS, a reduction of 10.6%. Moving to 3840x2160 Ultra yields 74.5 FPS, another 17.8% reduction from 1440p. This steady decline with resolution is characteristic of GPU-bound rendering, where the graphics card’s pixel throughput becomes the limiting factor.

The CPU’s influence is visible in the Low preset results. At 1920x1080 Low, the system reaches 209.8 FPS, which is likely approaching the upper bound of what the i5-14400F can feed to the GPU. At 2560x1440 Low, the frame rate drops to 187.1 FPS, and at 3840x2160 Low it falls to 159.4 FPS. The smaller proportional drop from 1080p Low to 1440p Low (10.8%) compared to the drop from 1440p Low to 4K Low (14.8%) suggests that the CPU is still contributing at lower resolutions, but the GPU takes over as the bottleneck as pixel count rises.

At Medium settings, the pattern is similar. The 1080p result is 131.1 FPS, 1440p is 115.4 FPS, and 4K is 99.7 FPS. The High preset shows 121 FPS at 1080p, 111.2 FPS at 1440p, and 92.4 FPS at 4K. In all cases, the frame rate scales inversely with resolution, confirming that the RTX 4070 is the dominant component for this game across all tested settings.

The Verdict

This PC can run Overpower at or above 60 FPS at every resolution and preset combination tested. The verdict data lists all four settings — Low, Medium, High, and Ultra — as playable at each resolution, with the playable threshold set at 60 FPS.

At 3840x2160, the best settings option is Ultra, which averages 74.5 FPS. This is the most demanding scenario in the test set, and the system clears it by 24.2%. At 2560x1440, Ultra averages 90.6 FPS, a 51% margin over the threshold. At 1920x1080, Ultra averages 101.3 FPS, giving a 68.8% margin. The data indicates that users can enable the highest quality preset without any concern for frame rate drops below the playable threshold.

The lowest recorded average across all tests is 74.5 FPS (4K Ultra), which means the system never falls below 60 FPS in any measured configuration. The RTX 4070’s 12 GB of GDDR6X memory and 504.2 GB/s bandwidth appear sufficient for the game’s demands at 4K, while the i5-14400F’s 10 cores and 16 threads provide enough processing headroom even at the highest frame rates seen in the Low preset tests.

Measured FPS Breakdown

At 3840x2160, the Low preset averages 159.4 FPS. Medium increases visual quality while dropping the average to 99.7 FPS. High runs at 92.4 FPS, and Ultra delivers 74.5 FPS. The spread from Low to Ultra is 84.9 FPS, with each step up in quality costing roughly 20-25 FPS on average.

At 2560x1440, Low averages 187.1 FPS. Medium produces 115.4 FPS, High runs at 111.2 FPS, and Ultra averages 90.6 FPS. The gap between Low and Medium is 71.7 FPS, while the gap between Medium and High is just 4.2 FPS, suggesting that the Medium to High transition is relatively inexpensive in terms of performance.

At 1920x1080, Low averages 209.8 FPS. Medium runs at 131.1 FPS, High at 121 FPS, and Ultra at 101.3 FPS. The difference between Medium and High is 10.1 FPS, while the difference between High and Ultra is 19.7 FPS. The 1080p Low result is the highest average FPS recorded in the entire test set, indicating that the system is capable of very high refresh rates when visual demands are reduced.

The data shows a consistent pattern: each resolution step from 1080p to 1440p to 4K reduces frame rates by roughly 10-20% depending on the preset, and each quality step from Low to Ultra reduces frame rates by a similar proportion. No min or max FPS values were recorded, so the analysis relies on average FPS only.

FAQ

Q: Can this system run Overpower at 4K Ultra settings?

A: Yes. The measured average FPS at 3840x2160 Ultra is 74.5 FPS, which is above the 60 FPS playable threshold. All four presets at 4K are listed as playable.

Q: What is the best settings preset at 1440p?

A: Ultra is the best settings option at 2560x1440, running at an average of 90.6 FPS. The playable settings list includes Low, Medium, High, and Ultra at this resolution.

Q: How much faster is 1080p Ultra compared to 4K Ultra?

A: The 1920x1080 Ultra preset averages 101.3 FPS, while 3840x2160 Ultra averages 74.5 FPS. The 1080p result is 36% higher.

Q: Which component is more important for this game?

A: The GPU is the primary performance driver. Frame rates scale consistently with resolution across all presets, dropping from 101.3 FPS at 1080p Ultra to 74.5 FPS at 4K Ultra, which indicates GPU-bound rendering.

Q: Does the CPU bottleneck the system at any settings?

A: At 1920x1080 Low, the system reaches 209.8 FPS, which is the highest recorded average. The CPU’s 10 cores and 16 threads appear sufficient for the game, as frame rates continue to scale with resolution rather than plateauing.

Q: What is the lowest average FPS recorded across all tests?

A: The lowest average is 74.5 FPS at 3840x2160 Ultra. No measured configuration falls below the 60 FPS playable threshold.