Instant compatibility check with FPS benchmarks and optimization tips
Overpower
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Your GPU supports ray tracing.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 111 | 139 | 149 | 222 |
| 1440p QHD | 134 | 158 | 172 | 232 |
| 1080p Full HD | 147 | 180 | 194 | 239 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Overpower on Your System
The Intel Core i5-13400F paired with the NVIDIA GeForce RTX 5090 is a top-tier combination for Overpower, delivering over 60 FPS at every preset and resolution tested, including a 111.3 FPS average at 4K Ultra. This combo ranks 112th out of 3,713 tested configurations, placing it in the top 3% of all systems. The data confirms the RTX 5090 dominates performance scaling, with the i5-13400F providing sufficient throughput to avoid bottlenecking at any resolution. Below is a detailed breakdown of settings, rankings, and component roles.
FAQ
Q: What is the highest preset that maintains at least 60 FPS at 4K?
A: Ultra settings at 3840x2160 run at an average of 111.3 FPS, which is well above the 60 FPS playable threshold. All four presets (Low, Medium, High, Ultra) are playable at 4K.
Q: How does this combo rank among all tested systems for Overpower?
A: It ranks 112th out of 3,713 tested combos, meaning it outperforms roughly 97% of all configurations tested for this game.
Q: Is the CPU or GPU more responsible for frame rate differences between resolutions?
A: The GPU is the dominant factor. At 1080p Ultra, the combo averages 147 FPS, while at 4K Ultra it drops to 111.3 FPS — a 24% reduction that aligns with GPU rasterization load, not CPU limits.
Q: What are the closest CPU alternatives to the Intel Core i5-13400F?
A: The AMD Ryzen 9 6900HS (avg score 25,284, 0% delta) and AMD Ryzen 7 6800H (avg score 25,201, +0.4%) are the nearest rivals. The Intel Core 5 120 and AMD Ryzen 5 5600X3D are also within 0.3% of its average benchmark score.
Q: What GPU rivals are closest to the RTX 5090 in benchmark scores?
A: The NVIDIA Tesla P100 PCIe 16 GB (avg score 79,605, +0.3%) and the Tesla P100 PCIe 12 GB (avg score 79,396, +0.6%) are the closest. The AMD Radeon RX 6850M XT (avg score 78,940, +1.1%) is also a near match.
Q: Which resolution shows the smallest FPS gap between Low and Ultra presets?
A: At 4K, the gap between Low (222 FPS) and Ultra (111.3 FPS) is 110.7 FPS. At 1080p, the gap is 91.8 FPS (238.8 Low vs 147 Ultra), making 4K the resolution where preset choice has the largest relative impact.
Best Settings per Resolution
At 3840x2160, the most demanding preset that stays at or above 60 FPS is Ultra, with an average of 111.3 FPS. The RTX 5090’s 32 GB GDDR7 memory and 1.79 TB/s bandwidth handle 4K textures without dipping below the threshold. High settings yield 138.7 FPS, Medium 148.8 FPS, and Low 222 FPS — all comfortably playable.
At 2560x1440, Ultra is again the best preset, averaging 133.5 FPS. The step from Medium (171.8 FPS) to Ultra (133.5 FPS) costs 38.3 FPS, but the frame rate remains far above 60 FPS. Low settings reach 231.6 FPS, showing the GPU scales efficiently at this resolution.
At 1920x1080, Ultra runs at 147 FPS, the highest playable preset. The 1080p Ultra result is only 13.5 FPS lower than 1440p Ultra (133.5 FPS), indicating that at lower resolutions the CPU begins to matter more — the i5-13400F’s 10 cores and 16 threads sustain 238.8 FPS on Low, but Ultra’s heavier shading workload still leaves headroom. Every preset exceeds 60 FPS, so users can prioritize visual fidelity without compromise.
How This Combo Ranks
The Intel Core i5-13400F + RTX 5090 combo ranks 112th out of 3,713 tested configurations for Overpower. That places it in the 97th percentile of all systems tested — a strong result, though not top-tier. The rank reflects the RTX 5090’s 92nd percentile standing among all GPUs (avg benchmark score 39,650 in PassMark G3D), paired with the i5-13400F’s 77th percentile among CPUs (avg score 25,292). The CPU is clearly the weaker link, but its 3DMark multi-thread score of 7,314 and Cinebench R23 multi-core score of 22,604 are sufficient to feed the GPU at all tested presets.
The rank of 112 also accounts for the fact that many higher-ranked combos likely pair the RTX 5090 with faster CPUs like the Core i9 or Ryzen 9 series. However, the measured FPS data shows that for Overpower specifically, the i5-13400F does not bottleneck the 5090 — the 4K Ultra average of 111.3 FPS is only 35.7 FPS below the 1080p Ultra result, a difference driven by GPU load rather than CPU limits.
Similar Performance Alternatives
For the CPU, the nearest rivals to the Intel Core i5-13400F are the AMD Ryzen 9 6900HS (avg score 25,284, 0% delta) and the AMD Ryzen 7 6800H (avg score 25,201, +0.4% delta). Both are mobile-class chips but deliver nearly identical average benchmark scores, meaning system builders using those processors would see similar frame rates in Overpower when paired with the RTX 5090. The Intel Core 5 120 (avg score 25,362, -0.3%) and AMD Ryzen 5 5600X3D (avg score 25,365, -0.3%) are also within a fraction of a percent, so any of these four would behave almost identically in this game.
For the GPU, the NVIDIA Tesla P100 PCIe 16 GB (avg score 79,605, +0.3%) and Tesla P100 PCIe 12 GB (avg score 79,396, +0.6%) are the closest matches to the RTX 5090’s average benchmark score of 79,842. The AMD Radeon RX 6850M XT (avg score 78,940, +1.1%) and AMD Radeon Pro Vega 64X (avg score 80,959, -1.4%) are also near. These GPUs would produce frame rates within roughly 1% of the RTX 5090’s results in Overpower, assuming identical CPU and driver conditions. Note that the Tesla P100 cards are datacenter-oriented, so their driver and display output limitations may affect real-world gaming, but the raw compute scores are comparable.
CPU and GPU Roles
The RTX 5090 is the primary driver of performance in Overpower. Evidence comes from resolution scaling: at 1080p Ultra, the combo averages 147 FPS, while at 4K Ultra it drops to 111.3 FPS — a 35.7 FPS decline. If the CPU were the bottleneck, this drop would be much smaller, because higher resolutions increase GPU load without significantly changing CPU work. The fact that 4K Ultra still holds above 111 FPS shows the GPU has ample headroom.
Preset scaling reinforces this. At 4K, moving from Low (222 FPS) to Ultra (111.3 FPS) costs 110.7 FPS — a 49.9% reduction. At 1080p, the same preset change costs 91.8 FPS (238.8 to 147), a 38.4% reduction. The larger relative drop at 4K indicates the GPU is doing proportionally more work as pixel count rises, while the CPU’s contribution stays flat.
The i5-13400F’s role becomes slightly more visible at 1080p Low, where the combo hits 238.8 FPS. That result is close to the CPU’s 3DMark 16-thread score of 7,314 and PassMark multi-thread score of 25,032, suggesting the CPU can push very high frame rates when the GPU is underloaded. However, even at 1080p Ultra (147 FPS), the CPU is not the limiting factor — the 5090 still has headroom, as evidenced by the 4K Ultra result being only 24% lower.
At 1440p, the combo behaves as expected: Low (231.6 FPS), Medium (171.8 FPS), High (157.9 FPS), Ultra (133.5 FPS). The gap between Medium and High is just 14.1 FPS, and between High and Ultra 24.4 FPS — these increments are consistent with GPU-bound rendering. Users targeting 1440p 144Hz displays can enable Ultra and still exceed the refresh rate.
The Verdict
This PC can run Overpower at every resolution and preset tested, with all twelve measured configurations exceeding the 60 FPS playable threshold. At 3840x2160, the best playable preset is Ultra at 111.3 FPS; High runs at 138.7 FPS, Medium at 148.8 FPS, and Low at 222 FPS. At 2560x1440, Ultra delivers 133.5 FPS, with High at 157.9 FPS and Medium at 171.8 FPS. At 1920x1080, Ultra reaches 147 FPS, while Low tops out at 238.8 FPS.
The verdict is unambiguous: this combination is overqualified for Overpower’s demands. The RTX 5090’s 104.8 TFLOPS FP32 compute and 176 ROPs provide massive rasterization throughput, while the i5-13400F’s 10 cores and 4.6 GHz boost clock ensure no CPU-side stalling. The only scenario where the CPU might matter more is if users enable ultra-high refresh rate monitors (240Hz+) at 1080p Low, where the 238.8 FPS result approaches the CPU’s practical limit — but even then, the frame rate is far above any standard display requirement. For 4K gaming, this combo is effectively maxed-out on settings.