Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Overpower
Action 2023

Overpower

84%
Great Match Your system meets recommended requirements.

Performance

1080p (Full HD)

Low 1080p Measured
241 FPS
Ultra 1080p Measured
135 FPS

1440p (2K / QHD)

Low 1440p Measured
232 FPS
Ultra 1440p Measured
120 FPS

4K (Ultra HD)

Low 4K Measured
213 FPS
Ultra 4K Measured
102 FPS
6.1ms Frame Time
9ms Input Latency
4K Best Resolution

Requirements Check

Processor
Required 37,513
Your CPU 25,292
Graphics Card
Required 27,382
Your GPU 56,083

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 102 123 133 213
1440p QHD 120 145 156 232
1080p Full HD 135 163 175 241

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 163
1920x1080 Low 241
1920x1080 Medium 175
1920x1080 Ultra 135
2560x1440 High 145
2560x1440 Low 232
2560x1440 Medium 156
2560x1440 Ultra 120
3840x2160 High 123
3840x2160 Low 213
3840x2160 Medium 133
3840x2160 Ultra 102

Performance Analysis: Overpower on Your System

The Intel Core i5-13400F paired with the NVIDIA GeForce RTX 5080 delivers exceptional raw performance in Overpower, with measured frame rates that far exceed the 60 FPS playability threshold across every resolution and preset combination tested. The data indicates a system that is not merely playable but overwhelmingly capable, leaving substantial headroom for future titles or more demanding scenarios. This analysis breaks down the measured FPS figures, compares the hardware to its nearest performance rivals, and examines which component drives the experience at each resolution.

Measured FPS Breakdown

The measured FPS data for this combo in Overpower shows a clear and consistent pattern: performance scales predictably with resolution and settings, but never drops below a highly playable 102 FPS average at the most demanding configuration tested. At 1920x1080, the system is almost untouchable. With Low settings, the average FPS hits 241, which is the highest recorded figure for this setup. Moving to Medium settings, the average drops to 175 FPS, with a minimum of 149 FPS and a maximum of 202 FPS, showing a tight and stable frame delivery. High settings produce an average of 163 FPS, while Ultra settings still maintain a robust 135 FPS average. The jump from Low to Ultra at 1080p represents a 106 FPS drop, but the absolute floor remains far above any concern for smooth gameplay.

At 2560x1440, the pattern continues with slightly lower absolute numbers. Low settings yield an average of 232 FPS, which is still exceptionally high. Medium settings average 156 FPS, with a recorded minimum of 133 FPS and a maximum of 180 FPS. High settings deliver an average of 145 FPS, and Ultra settings maintain an average of 120 FPS. The relative scaling between settings is similar to 1080p, but the overall reduction in frame rate is moderate, indicating that the GPU is still the primary bottleneck rather than the CPU. The difference between 1080p and 1440p at Ultra settings is 15 FPS (135 vs 120), which is a modest penalty for the increased pixel count.

The most demanding scenario tested is 3840x2160 with Ultra settings, where the average FPS is 102. This is the only configuration where the average dips into triple digits, but it still clears the 60 FPS threshold by a wide margin. At 4K, Low settings produce an average of 213 FPS, Medium settings average 133 FPS with a minimum of 113 FPS and a maximum of 153 FPS, and High settings average 123 FPS. The scaling from Low to Ultra at 4K shows a 111 FPS reduction (213 to 102), which is the largest absolute drop across all resolutions, highlighting the increased GPU workload at higher pixel counts. Notably, the minimum FPS data is only provided for the Medium preset at each resolution, with 113 FPS at 4K, 133 FPS at 1440p, and 149 FPS at 1080p, suggesting that the system maintains consistent frame pacing without severe dips.

Similar Performance Alternatives

Examining the nearest rivals for the CPU and GPU provides context for how this specific combination compares to other hardware that could deliver similar frame rates. The Intel Core i5-13400F has an average benchmark score of 25292, placing it in the 77th percentile of all CPUs. Its closest competitor is the AMD Ryzen 9 6900HS, which has an average score of 25284, a negligible delta of 0%. This indicates that in CPU-bound scenarios, these two processors would perform nearly identically. The Intel Core 5 120 and AMD Ryzen 5 5600X3D both have average scores around 25362-25365, showing a delta of -0.3%, meaning the i5-13400F is marginally slower. The AMD Ryzen 7 6800H has a score of 25201, a delta of 0.4%, placing it slightly below the i5-13400F. For gaming, this means any of these CPUs would provide a similar foundation, with the i5-13400F being statistically tied with the Ryzen 9 6900HS.

On the GPU side, the NVIDIA GeForce RTX 5080 is a dominant force, with an average benchmark score of 56083 and a percentile ranking of 87. Its nearest rival is the AMD Radeon RX 9070 GRE, which scores 57367, showing a delta of -2.2%. This means the RTX 5080 is actually 2.2% slower than the RX 9070 GRE in these aggregated benchmarks, a surprising result given the RTX 5080's higher tier in NVIDIA's lineup. The AMD Radeon 8060S scores 55757, a delta of 0.6%, meaning the RTX 5080 is 0.6% faster. The AMD Radeon RX 6750 GRE 12 GB scores 55698, a delta of 0.7%, and the AMD Radeon Pro W5700X scores 54828, a delta of 2.3%. In practical terms, a system built with an RX 9070 GRE might see marginally higher frame rates in GPU-bound scenarios, but the difference is within the noise of real-world testing. The data suggests that swapping the RTX 5080 for an RX 9070 GRE would produce nearly identical results in Overpower, while choosing a weaker GPU like the Radeon Pro W5700X would result in a small but measurable performance deficit.

Best Settings per Resolution

The verdict data provides clear guidance on the optimal settings for each resolution, defined as the most demanding preset that maintains an average FPS at or above 60. At 1920x1080, the best settings are Ultra, with an average FPS of 135. This is the highest quality preset available, and the system handles it with 75 FPS of headroom above the playability threshold. At 2560x1440, the best settings are also Ultra, with an average FPS of 120. This shows that the RTX 5080 has sufficient bandwidth and compute power to handle 1440p at maximum quality without breaking a sweat.

At 3840x2160, the best settings remain Ultra, with an average FPS of 102. While this is the lowest average FPS recorded in the entire dataset, it still comfortably exceeds the 60 FPS threshold by 42 FPS. The data indicates that at no resolution is the user forced to compromise on visual quality to achieve playable frame rates. The i5-13400F and RTX 5080 combination is so powerful that even at 4K Ultra, the system is not stressed to its limit. The fact that Ultra is the recommended setting at all three resolutions suggests that the primary limitation is the display's refresh rate rather than the hardware's capability.

The Verdict

The question of whether this PC can run Overpower is answered with a resounding yes, and the data shows it does so with exceptional ease. According to the verdictByResolution field, all four settings presets (Low, Medium, High, and Ultra) are playable at every resolution tested, from 1920x1080 up to 3840x2160. The playable threshold is defined as 60 FPS, and the lowest average FPS recorded is 102 at 4K Ultra. This means the system never even comes close to dropping below the playable threshold, regardless of how demanding the configuration is.

Breaking it down by resolution: at 1920x1080, the best playable setting is Ultra at 135 FPS, which is more than double the 60 FPS minimum. At 2560x1440, Ultra is again the best setting, delivering 120 FPS. At 3840x2160, Ultra is still the best setting, with 102 FPS average. The system is not just playable; it is future-proof for this title, with enough headroom to handle potential patches, additional background processes, or higher refresh rate displays. For a user with a 144Hz monitor, even the most demanding 4K Ultra preset would not fully saturate the display's refresh rate, but at 1080p and 1440p, the frame rates are high enough to take advantage of high-refresh-rate displays.

FAQ

*Q: What is the highest average FPS this combo achieves in Overpower?*

A: The highest average FPS recorded is 241, achieved at 1920x1080 resolution with Low settings.

Q: Is 4K gaming viable with this hardware?

A: Yes, at 3840x2160, the system maintains an average of 102 FPS on Ultra settings, which is the most demanding preset tested and well above the 60 FPS playable threshold.

Q: How does the RTX 5080 compare to its nearest rival, the AMD Radeon RX 9070 GRE?

A: The RTX 5080 has an average benchmark score of 56083, while the RX 9070 GRE scores 57367, making the RX 9070 GRE 2.2% faster in aggregated benchmarks.

*Q: What is the minimum FPS recorded for this system in Overpower?*

A: The minimum FPS data is only provided for the Medium preset at each resolution: 113 FPS at 4K, 133 FPS at 1440p, and 149 FPS at 1080p.

Q: Which CPU is the closest performance match to the Intel Core i5-13400F?

A: The AMD Ryzen 9 6900HS has an average benchmark score of 25284, which is statistically identical to the i5-13400F's score of 25292, showing a 0% delta.

Q: What is the performance difference between Ultra settings at 1080p and 4K?

A: At 1920x1080 Ultra, the average FPS is 135, while at 3840x2160 Ultra, the average FPS is 102, representing a 33 FPS reduction when moving to 4K.

How This Combo Ranks

In the broader context of all tested hardware combinations for Overpower, this specific pairing of the Intel Core i5-13400F and NVIDIA GeForce RTX 5080 achieves a rank of 197 out of 3713 combos. This places it in the top 5.3% of all tested systems, which is an exceptional result. The rank of 197 indicates that there are 196 other combinations that deliver higher average frame rates in this game, but given that this system already achieves over 100 FPS at 4K Ultra, those higher-ranked combos are likely using even more exotic hardware like the RTX 5090 or top-tier AMD offerings. The percentile ranking of the GPU (87th) and CPU (77th) individually suggest that the GPU is the stronger component in this pairing, which is typical for a gaming system. The combo rank being higher than either individual percentile suggests that the pairing is well-balanced for this specific game, with no obvious bottleneck holding back the other component.

CPU and GPU Roles

Analyzing the scaling between resolutions and presets reveals which component is the primary driver of performance in Overpower. At 1920x1080, the difference between Low and Ultra settings is 106 FPS (241 to 135), which is a 44% reduction in frame rate. This significant drop indicates that the GPU is heavily utilized, as increasing the visual quality directly impacts the frame rate. However, the absolute numbers are so high that the CPU is not limiting; the i5-13400F is capable of feeding the RTX 5080 enough data to reach 241 FPS at Low settings. At this resolution, the CPU is likely the limiting factor at Low settings, as the GPU is so fast that it waits on the CPU to process game logic and draw calls. This is evidenced by the fact that the frame rate does not scale linearly with resolution; the drop from 1080p to 1440p at Ultra settings is only 15 FPS (135 to 120), which is less than the 106 FPS drop from Low to Ultra at the same resolution.

At 2560x1440, the GPU begins to take on a more significant role. The scaling from Low to Ultra is 112 FPS (232 to 120), which is a 48% reduction, slightly more than at 1080p. This suggests that the GPU is becoming the primary bottleneck as pixel count increases. The difference between 1440p and 4K at Ultra settings is 18 FPS (120 to 102), showing that the GPU is still managing the increased load well. At 3840x2160, the GPU is unambiguously the limiting factor. The scaling from Low to Ultra is 111 FPS (213 to 102), and the frame rates are the lowest in the dataset. The CPU's role diminishes as resolution increases, because the GPU's rendering workload grows faster than the CPU's ability to prepare frames. The data shows that at 4K, the RTX 5080 is doing the heavy lifting, while the i5-13400F's 10 cores and 16 threads are more than sufficient to keep up, as evidenced by the fact that even the lowest recorded FPS of 102 at 4K Ultra does not indicate a CPU bottleneck. The conclusion is that for this game, the GPU is the dominant factor at all resolutions, but its dominance becomes more pronounced as resolution increases, with the CPU providing a solid foundation that never becomes a limiting factor.