Instant compatibility check with FPS benchmarks and optimization tips
Overpower
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Your GPU supports ray tracing.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 81 | 103 | 108 | 173 |
| 1440p QHD | 99 | 120 | 126 | 207 |
| 1080p Full HD | 111 | 130 | 141 | 229 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Overpower on Your System
The Intel Core i5-13400F paired with the NVIDIA GeForce RTX 5070 delivers a decisive performance result in Overpower: this combination runs every preset at every tested resolution well above the 60 FPS playable threshold. Benchmark data confirms the combo achieves a 102.9 FPS average at 4K High, 120.3 FPS at 1440p High, and 130.4 FPS at 1080p High, with the Ultra preset remaining fluid at 80.6 FPS, 99.1 FPS, and 110.5 FPS respectively. This system does not merely meet playability requirements—it exceeds them by a substantial margin across the board.
Measured FPS Breakdown
The measured FPS data for Overpower covers three resolutions (3840x2160, 2560x1440, 1920x1080) and four settings tiers (Low, Medium, High, Ultra). All figures are average FPS values; min and max FPS were not recorded in the dataset.
At 3840x2160, the RTX 5070 delivers 173.1 FPS on Low, 107.9 FPS on Medium, 102.9 FPS on High, and 80.6 FPS on Ultra. The spread between Low and Ultra is substantial—92.5 FPS—which indicates that the highest preset imposes a significant load on the GPU. The step from Low to Medium is the largest single drop (65.2 FPS), while the gap between Medium and High is only 5.0 FPS, and High to Ultra costs 22.3 FPS. This pattern suggests that the Medium-to-High transition is relatively inexpensive, while Ultra demands a noticeable premium.
At 2560x1440, the numbers scale upward as expected: 206.5 FPS on Low, 126.3 FPS on Medium, 120.3 FPS on High, and 99.1 FPS on Ultra. The Low-to-Medium drop here is 80.2 FPS, which is the largest single-tier penalty at this resolution. Medium to High costs just 6.0 FPS, while High to Ultra drops 21.2 FPS. The 1440p results show that even the most demanding preset stays under the 100 FPS ceiling, but just barely, at 99.1 FPS.
At 1920x1080, the frame rates are the highest in the dataset: 228.9 FPS on Low, 141.1 FPS on Medium, 130.4 FPS on High, and 110.5 FPS on Ultra. The Low-to-Medium drop is 87.8 FPS, the largest absolute penalty across any resolution and settings combination. Medium to High costs 10.7 FPS, and High to Ultra costs 19.9 FPS. Even at 1080p Ultra, the system maintains a 110.5 FPS average, which is nearly double the 60 FPS threshold.
Comparing identical settings across resolutions, the scaling is consistent. At Ultra, dropping from 4K to 1440p gains 18.5 FPS (from 80.6 to 99.1), and dropping from 1440p to 1080p gains another 11.4 FPS (from 99.1 to 110.5). At High, the gains are smaller: 4K to 1440p adds 17.4 FPS, and 1440p to 1080p adds 10.1 FPS. At Low, the resolution scaling is more pronounced, with 4K to 1440p adding 33.4 FPS and 1440p to 1080p adding 22.4 FPS.
CPU and GPU Roles
The data reveals a clear division of labor between the Intel Core i5-13400F and the NVIDIA GeForce RTX 5070 in Overpower. The GPU is the primary performance driver at all tested resolutions, but the CPU becomes more relevant as resolution drops.
At 3840x2160, the GPU is overwhelmingly the bottleneck. The frame rate differences between presets are large (173.1 FPS on Low versus 80.6 FPS on Ultra), which indicates that the GPU's workload scales heavily with settings. The CPU, with its 10 cores and 16 threads, has ample headroom at this resolution because the pixel throughput demands dominate.
At 2560x1440, the balance shifts slightly. The Low preset reaches 206.5 FPS, which begins to approach the CPU's potential ceiling for frame generation. The fact that Low at 1440p (206.5 FPS) is closer to Low at 1080p (228.9 FPS) than Low at 4K (173.1 FPS) suggests that at lower resolutions and settings, the CPU starts to limit the maximum achievable frame rate. The i5-13400F's single-thread performance, measured at 960 in the 3dmark_single_thread test, becomes a factor when the GPU is underutilized.
At 1920x1080, the CPU's role is most apparent. The Low preset produces 228.9 FPS, which is the highest recorded value in the entire dataset. The gap between Low and Medium at 1080p (87.8 FPS) is larger than at any other resolution, which implies that the GPU is still doing heavy work even at Low settings, but the CPU is also contributing significantly to the frame pacing at this resolution.
The scaling between presets confirms this interpretation. At 4K, the High-to-Ultra drop is 22.3 FPS, while at 1080p the same transition costs 19.9 FPS. The similarity in these absolute drops suggests that the GPU is the limiting factor in both cases, but the slightly smaller penalty at 1080p indicates that the CPU is absorbing some of the load as resolution decreases.
Overall, the data shows that this combo is GPU-bound at 4K and CPU-aware at 1080p. The RTX 5070's 672.0 GB/s memory bandwidth and 30.87 TFLOPS FP32 throughput handle the heavy lifting for Overpower's visuals, while the i5-13400F's Raptor Lake architecture provides enough single-thread performance to avoid capping the frame rate at lower resolutions.
Best Settings per Resolution
The playable threshold for Overpower is 60 FPS, and the dataset shows that every settings tier at every resolution clears this bar. The verdict data confirms that all four presets (Low, Medium, High, Ultra) are playable at each resolution, so the "best" setting is defined as the most demanding preset that still holds at or above 60 FPS.
At 3840x2160, the best settings are Ultra, which delivers an average of 80.6 FPS. This is 20.6 FPS above the playable threshold, providing a comfortable margin. The next step down, High, offers 102.9 FPS, but Ultra is the highest fidelity option that remains playable.
At 2560x1440, the best settings are Ultra, with an average of 99.1 FPS. This is 39.1 FPS above the threshold, leaving substantial headroom. The High preset at 120.3 FPS is also viable, but Ultra is the top tier and it stays well within playable range.
At 1920x1080, the best settings are Ultra, with an average of 110.5 FPS. This is 50.5 FPS above the threshold, making it the most comfortable margin of the three resolutions. The Ultra preset at 1080p is nearly double the playable threshold, so there is no practical reason to drop to lower settings for frame rate purposes.
In all cases, the system can run the maximum preset without falling below 60 FPS. The data does not include min FPS values, so the analysis relies on averages, but the margins are large enough that even significant frame time variance would not threaten the playable threshold.
FAQ
Q: Can this PC run Overpower at 4K Ultra settings?
A: Yes. The measured average FPS at 3840x2160 Ultra is 80.6 FPS, which is 20.6 FPS above the 60 FPS playable threshold. The verdict data lists Ultra as the best playable settings at this resolution.
Q: What is the highest frame rate this combo achieves in Overpower?
A: The highest recorded average is 228.9 FPS, achieved at 1920x1080 with Low settings. The next best is 206.5 FPS at 2560x1440 Low, followed by 173.1 FPS at 3840x2160 Low.
Q: How much performance is lost when moving from High to Ultra settings?
A: At 4K, the drop from High (102.9 FPS) to Ultra (80.6 FPS) is 22.3 FPS. At 1440p, the drop is 21.2 FPS (from 120.3 to 99.1). At 1080p, the drop is 19.9 FPS (from 130.4 to 110.5).
Q: Is the CPU or GPU the limiting factor at 1080p?
A: The data indicates the GPU is still the primary bottleneck, but the CPU becomes more relevant. Low settings at 1080p produce 228.9 FPS, which is close to the CPU's frame generation ceiling, while the gap between Low and Medium (87.8 FPS) is the largest absolute drop in the dataset.
Q: Does the system ever drop below 60 FPS in Overpower?
A: Based on the measured averages, no. Every resolution and settings combination in the dataset exceeds 60 FPS, with the lowest recorded average being 80.6 FPS at 4K Ultra. Min FPS data was not recorded, so this analysis is based on average values only.
Q: How does this combo rank among all tested systems for Overpower?
A: The combo ranks 665 out of 3713 tested combinations, placing it in the top 17.9% of all tested systems for this game.
How This Combo Ranks
The Intel Core i5-13400F + NVIDIA GeForce RTX 5070 combo ranks 665 out of 3713 tested combinations in Overpower, placing it in the top 17.9% of all tested systems. This is a strong position, but it is not near the top of the leaderboard, which suggests that there are many faster combos in the database.
The CPU's individual percentile is 77, meaning it outperforms 77% of all CPUs in the database. The GPU's percentile is 82, outperforming 82% of all GPUs. The combo rank of 665 out of 3713 is roughly consistent with these percentiles, indicating that the pairing is well-balanced for this game.
The CPU's nearest rivals include the AMD Ryzen 9 6900HS (avgScore 25284, deltaPct 0), the Intel Core 5 120 (avgScore 25362, deltaPct -0.3), the AMD Ryzen 5 5600X3D (avgScore 25365, deltaPct -0.3), and the AMD Ryzen 7 6800H (avgScore 25201, deltaPct 0.4). The i5-13400F's avgBenchmarkScore is 25292, which puts it within 0.4% of these rivals in either direction. This means the CPU is statistically indistinguishable from its closest competitors in synthetic benchmarks.
The GPU's nearest rivals are the AMD Radeon Pro 580 (avgScore 40318, deltaPct 0.1), the AMD Radeon Pro WX 7100 (avgScore 40063, deltaPct 0.8), the AMD Radeon Pro 5300 (avgScore 40870, deltaPct -1.2), and the NVIDIA RTX A500 Mobile (avgScore 39568, deltaPct 2). The RTX 5070's avgBenchmarkScore is 40377, which places it 0.1% above the Radeon Pro 580 and 2% above the RTX A500 Mobile. These are all professional or mobile GPUs, which underscores that the RTX 5070's synthetic benchmark position is not directly comparable to gaming-focused rivals.
The combination of a mid-77th-percentile CPU and an 82nd-percentile GPU yields a combo rank that is slightly lower than either component's individual percentile. This suggests that Overpower is not particularly sensitive to either component alone, and the system's overall performance is limited by the interaction of the two.
The Verdict
This PC can run Overpower at every tested resolution and preset. The verdict data is unambiguous: all four playable settings (Low, Medium, High, Ultra) are listed as playable at 3840x2160, 2560x1440, and 1920x1080.
At 4K, the best settings are Ultra with an average of 80.6 FPS. This clears the 60 FPS threshold by 20.6 FPS, which is a comfortable margin for an action game where frame pacing matters. At 1440p, Ultra delivers 99.1 FPS, and at 1080p, Ultra delivers 110.5 FPS. The system never approaches the 60 FPS threshold even at its most demanding configuration.
The weakest performance point in the entire dataset is 4K Ultra at 80.6 FPS, which is still 34.3% above the playable threshold. The strongest point is 1080p Low at 228.9 FPS, which is nearly quadruple the threshold. There is no scenario in the measured data where this combo fails to deliver a playable experience.
The i5-13400F's 10 cores and 16 threads, combined with the RTX 5070's 12 GB of GDDR7 memory and 6144 shading units, provide more than enough horsepower for Overpower. The GPU's 672.0 GB/s memory bandwidth ensures that high-resolution textures do not cause stuttering, and the CPU's 20 MB of L3 cache helps maintain consistent frame times at lower resolutions. This is a system that not only runs Overpower but runs it with significant headroom, making it suitable for high-refresh-rate monitors at 1080p and 1440p, and for 60 Hz displays at 4K.