Instant compatibility check with FPS benchmarks and optimization tips
Overpower
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Your GPU supports ray tracing.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 57 | 72 | 80 | 125 |
| 1440p QHD | 72 | 84 | 88 | 146 |
| 1080p Full HD | 76 | 95 | 101 | 162 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Overpower on Your System
The Intel Core i5-13400F paired with the NVIDIA GeForce RTX 5060 delivers a consistently strong performance profile in Overpower, with benchmark data showing that the combination is capable of exceeding the 60 FPS playability threshold across nearly every resolution and preset tested. The only exception is the most demanding configuration at 4K Ultra, which falls slightly short. This analysis breaks down the measured frame rates, contextualizes the hardware against its nearest rivals, and examines how the CPU and GPU divide their responsibilities under different graphical loads.
Measured FPS Breakdown
At 1920x1080, the combo produces its highest frame rates, with the Low preset averaging 161.5 FPS. Moving to Medium yields an average of 101.3 FPS, while High drops further to 95.3 FPS. The Ultra preset, despite being the most demanding, still maintains a solid average of 76.2 FPS. The scaling from Low to Ultra represents a performance reduction of roughly 53%, which is typical for a title where shadow quality and post-processing effects carry significant weight. All 1080p results sit well above the 60 FPS threshold, indicating that the GPU has ample headroom at this resolution.
Stepping up to 2560x1440, the pattern holds but with expected reductions. The Low preset averages 145.9 FPS, a 9.7% decrease from the 1080p Low result. Medium averages 87.9 FPS, High averages 83.6 FPS, and Ultra averages 71.9 FPS. Notably, the gap between Medium and High at 1440p is only 4.3 FPS, suggesting that the visual fidelity gain from High settings does not come at a significant performance cost. The Ultra preset remains comfortably playable, with an average that is 11.9 FPS above the playability threshold.
At 3840x2160, the demands of 4K become apparent. Low settings average 125 FPS, which is still exceptionally fast. Medium follows at 79.6 FPS, and High at 71.5 FPS. The Ultra preset, however, averages just 56.8 FPS, dipping below the 60 FPS playability line. This is the only configuration in the entire dataset that fails to meet the threshold. The drop from High to Ultra at 4K is 14.7 FPS, a 20.6% reduction, which is more severe than the proportional drops seen at lower resolutions. This indicates that the Ultra preset at 4K pushes the GPU’s memory bandwidth and shading units to their limits.
The data shows no min or max FPS values, so variance cannot be assessed directly. However, the average frame rates alone suggest a stable experience at most settings, with the 4K Ultra exception being the only clear miss.
Similar Performance Alternatives
Looking at the CPU’s nearest rivals, the Intel Core i5-13400F sits in a tight cluster of similar performers. The AMD Ryzen 9 6900HS has an average benchmark score of 25284, which is effectively identical to the i5-13400F’s 25292, with a delta of 0%. The Intel Core 5 120 scores 25362, a 0.3% advantage over the i5-13400F. The AMD Ryzen 5 5600X3D also scores 25365, again 0.3% higher. The AMD Ryzen 7 6800H trails slightly with a score of 25201, which is 0.4% lower. In practice, these differences are negligible; any of these CPUs would deliver nearly indistinguishable frame rates in Overpower, which is not a heavily threaded title. The i5-13400F’s 10 cores and 16 threads provide ample headroom, but the game’s engine likely relies on fewer threads, making single-thread performance more relevant.
On the GPU side, the NVIDIA GeForce RTX 5060’s nearest rivals show a similar story of near-parity. The AMD Radeon 860M scores 26401, which is 0.3% higher than the RTX 5060’s 26331. The NVIDIA GeForce MX550 scores 26421, also 0.3% higher. The AMD Radeon RX 5700 XT 50th Anniversary scores 26553, a 0.8% lead. The AMD Radeon RX 6750 XT scores 26011, which is 1.2% lower than the RTX 5060. These deltas are all within a narrow band, meaning that swapping the RTX 5060 for any of these cards would result in very similar average FPS in Overpower. The RX 6750 XT, with its slightly lower score, might see a marginal FPS drop, while the RX 5700 XT 50th Anniversary could offer a tiny gain, but none of these changes would alter the fundamental verdict at any resolution.
CPU and GPU Roles
The benchmark results reveal a clear shift in bottleneck behavior depending on resolution. At 1920x1080, the GPU is the primary limiting factor, but the CPU still plays a notable role. The frame rate difference between Low and Ultra at 1080p is 85.3 FPS, which is substantial. However, the CPU’s influence is more visible when comparing the scaling from 1080p to 1440p. At Low settings, the drop from 161.5 FPS to 145.9 FPS is only 9.7%, which is relatively modest. This suggests that at lower settings, the CPU is able to feed the GPU adequately, and the frame rate is still largely GPU-bound.
As resolution increases to 2560x1440 and then 3840x2160, the GPU’s workload grows disproportionately. At Ultra settings, the frame rate drops from 76.2 FPS at 1080p to 71.9 FPS at 1440p, a 5.6% reduction, and then to 56.8 FPS at 4K, a further 21% reduction. This steep decline at 4K indicates that the RTX 5060’s 8 GB of GDDR7 memory and 128-bit bus become saturated, making the GPU the dominant bottleneck. The CPU, meanwhile, has less impact at higher resolutions because the frame rate is lower, giving it more time to prepare each frame.
The data implies that at 1080p and 1440p, the i5-13400F is more than sufficient to keep up with the RTX 5060, and any performance gains would likely come from a faster GPU. At 4K, the GPU is unequivocally the limiting factor, and the CPU’s role is diminished further. The 3DMark single-thread score of 960 and the Cinebench R23 single-core score of 3191 suggest that the CPU’s per-core performance is strong enough to avoid bottlenecking even at high frame rates, which is consistent with the observed scaling.
FAQ
*Q: Can this combo run Overpower at 1080p with all settings maxed?*
A: Yes. At 1920x1080 with Ultra settings, the average FPS is 76.2, which is 16.2 FPS above the 60 FPS playable threshold.
Q: Is 4K gaming viable with this hardware?
A: It depends on the preset. At 4K Ultra, the average FPS drops to 56.8, which is below the 60 FPS threshold. However, 4K High averages 71.5 FPS, and 4K Medium averages 79.6 FPS, so lowering settings to High or Medium makes 4K playable.
Q: How does the RTX 5060 compare to the AMD Radeon RX 6750 XT in this game?
A: The RTX 5060 has an average benchmark score of 26331, which is 1.2% higher than the RX 6750 XT’s 26011. In practice, this translates to a negligible difference in Overpower frame rates.
Q: What is the best settings preset for 1440p?
A: The Ultra preset at 2560x1440 averages 71.9 FPS, which is above the 60 FPS threshold. This makes Ultra the best visual quality option that remains playable at 1440p.
Q: Does the CPU bottleneck the GPU at any resolution?
A: The data shows that frame rates scale consistently with GPU load, and the CPU’s benchmark scores, including a 3DMark single-thread score of 960, indicate it is not a limiting factor at any tested resolution. The bottleneck shifts entirely to the GPU at 4K Ultra.
Q: How does this combo rank among all tested configurations?
A: The combo ranks 1792 out of 3713 tested combinations, placing it in the upper half of all systems tested for Overpower.
Best Settings per Resolution
At 1920x1080, the most demanding preset that remains at or above 60 FPS is Ultra, with an average of 76.2 FPS. There is no reason to lower settings at this resolution, as even the heaviest preset provides substantial headroom above the playability threshold.
At 2560x1440, Ultra is again the best choice, averaging 71.9 FPS. This is 11.9 FPS above the 60 FPS line, so players can enjoy the highest visual fidelity without sacrificing smoothness.
At 3840x2160, Ultra falls short at 56.8 FPS. The next best option is High, which averages 71.5 FPS. This preset provides a comfortable margin above 60 FPS while still offering high-quality visuals. Medium, at 79.6 FPS, is also an option for those who prefer even higher frame rates, but High delivers the best balance of quality and performance.
How This Combo Ranks
The Intel Core i5-13400F and NVIDIA GeForce RTX 5060 combination ranks 1792 out of 3713 tested combos in Overpower. This places it in the 48th percentile of all systems benchmarked for this game, meaning roughly half of the tested configurations are faster. The ranking reflects the fact that the RTX 5060, while competent, is not a top-tier GPU; its 72nd percentile among all GPUs and the CPU’s 77th percentile among all CPUs suggest that this is a mid-to-upper-midrange pairing. The combo’s ability to handle 4K High settings and 1440p Ultra puts it ahead of many older or lower-end systems, but it trails configurations with higher-end GPUs that can maintain 60 FPS at 4K Ultra.
The Verdict
The benchmark data answers the core question definitively: yes, this PC can run Overpower with strong performance at most settings. At 1920x1080, all presets including Ultra clear the 60 FPS threshold, with the Ultra average at 76.2 FPS. At 2560x1440, the Ultra preset achieves 71.9 FPS, making it fully playable at the highest visual quality. At 3840x2160, the situation is more nuanced: High settings average 71.5 FPS and Medium averages 79.6 FPS, both of which are playable. However, Ultra at 4K drops to 56.8 FPS, which falls short of the 60 FPS playability standard. The verdict by resolution is clear: 1080p and 1440p are entirely playable at any preset, and 4K is playable at High or lower. The single miss at 4K Ultra is the only caveat, and it is a minor one given that the High preset still delivers excellent visual quality. Overall, this combo is a capable and well-balanced system for Overpower across the vast majority of configurations.