Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Overpower
Action 2023

Overpower

59%
Playable Your system meets minimum requirements.

Performance

1080p (Full HD)

Low 1080p Measured
118 FPS
Ultra 1080p Measured
57 FPS

1440p (2K / QHD)

Low 1440p Measured
105 FPS
Ultra 1440p Measured
51 FPS

4K (Ultra HD)

Low 4K Measured
89 FPS
Ultra 4K Measured
43 FPS
14.7ms Frame Time
22ms Input Latency
1440p Best Resolution

Requirements Check

Processor
Required 37,513
Your CPU 25,292
Graphics Card
Required 27,382
Your GPU 15,290

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 43 52 56 89
1440p QHD 51 61 66 105
1080p Full HD 57 68 74 118

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 68
1920x1080 Low 118
1920x1080 Medium 74
1920x1080 Ultra 57
2560x1440 High 61
2560x1440 Low 105
2560x1440 Medium 66
2560x1440 Ultra 51
3840x2160 High 52
3840x2160 Low 89
3840x2160 Medium 56
3840x2160 Ultra 43

Performance Analysis: Overpower on Your System

The Intel Core i5-13400F paired with the NVIDIA GeForce RTX 2060 delivers a playable experience in Overpower at 1080p and 1440p, but it falls short of the 60 FPS threshold at 4K Ultra settings. The strongest result comes at 1080p High with an average of 68 FPS, while 1440p High stays just above the line at 61 FPS. The 4K resolution is only playable at Low settings, where the combo reaches 89 FPS. This pairing sits in the 79th percentile of all tested combinations for this game, ranking 2933 out of 3713. The data shows a clear pattern: the RTX 2060 becomes the limiting factor as resolution climbs, while the i5-13400F provides sufficient headroom at lower resolutions.

Measured FPS Breakdown

At 1920x1080, the i5-13400F and RTX 2060 combination produces its strongest frame rates across all presets. Low settings yield an average of 118 FPS, which is the highest recorded average for this combo in any configuration. Medium settings drop to an average of 74 FPS, with a minimum of 63 FPS and a maximum of 85 FPS. High settings average 68 FPS, and Ultra settings fall to 57 FPS, which is below the 60 FPS playable threshold. The gap between Low and Ultra at 1080p is 61 FPS, indicating that the preset choice has a substantial impact on performance even at this resolution.

Moving to 2560x1440, the averages decline across every preset. Low settings produce 105 FPS, still far above the playable threshold. Medium settings average 66 FPS, with a minimum of 56 FPS and a maximum of 76 FPS. High settings average 61 FPS, which is just barely above the 60 FPS line. Ultra settings drop to 51 FPS, making them unplayable according to the database's threshold. The minimum recorded at Medium, 56 FPS, shows that even a playable average can include dips below 60 FPS during demanding scenes.

At 3840x2160, the performance falls off significantly. Low settings still manage an average of 89 FPS, which is surprising given the 4K resolution. Medium settings average 56 FPS, with a minimum of 47 FPS and a maximum of 64 FPS. High settings average 52 FPS, and Ultra settings average 43 FPS. The Medium preset at 4K shows the widest range between minimum and maximum among all recorded data, a 17 FPS spread that suggests inconsistent frame pacing. Only the Low preset remains above the 60 FPS threshold at this resolution.

The resolution scaling follows an expected pattern. From 1080p Low to 1440p Low, the average drops from 118 FPS to 105 FPS, a reduction of 13 FPS. From 1440p Low to 4K Low, the average drops from 105 FPS to 89 FPS, another 16 FPS reduction. The total loss from 1080p Low to 4K Low is 29 FPS, or roughly 25 percent of the original average. For High settings, the progression goes from 68 FPS at 1080p to 61 FPS at 1440p to 52 FPS at 4K, a steady decline that eventually crosses below the playable threshold at 4K.

Best Settings per Resolution

At 1920x1080, the most demanding preset that stays at or above 60 FPS is High, with an average of 68 FPS. Ultra settings at this resolution average 57 FPS, missing the threshold by 3 FPS. The database identifies High as the best playable setting for 1080p, and the 68 FPS average provides a comfortable margin above the minimum.

For 2560x1440, the best setting is also High, with an average of 61 FPS. This is a narrow margin, only 1 FPS above the playable threshold. Medium settings at 1440p average 66 FPS, which is actually higher than High, but High is listed as the best because it offers better visual quality while still meeting the threshold. Ultra at 1440p averages 51 FPS, making it unplayable.

At 3840x2160, the only playable setting is Low, with an average of 89 FPS. Medium settings at 4K average 56 FPS, below the threshold, and High and Ultra are further behind at 52 FPS and 43 FPS respectively. The jump from Low to Medium at 4K costs 33 FPS on average, which is the largest single-preset drop recorded in the dataset. This makes Low the clear recommendation for 4K, even though the visual compromise is significant.

The verdict data confirms these choices. The database lists playable settings for 1080p as High, Low, and Medium, with High as the best. For 1440p, the playable settings are High, Low, and Medium, again with High as the best. For 4K, only Low is playable. This means users targeting 60 FPS must either accept Low settings at 4K or step down to a lower resolution for higher visual fidelity.

CPU and GPU Roles

The performance scaling across resolutions reveals which component dominates in Overpower. At 1080p, the CPU has more influence because the GPU is not fully saturated at lower pixel counts. The i5-13400F, with its 10 cores and 16 threads, provides enough processing power to keep frame rates high even at Low settings, where the average reaches 118 FPS. The CPU's single-thread performance, reflected in a 3dmark_single_thread score of 960 and a cinebench_r23_singlecore score of 3191, supports this, as the game appears to rely on strong per-core performance at lower resolutions.

As resolution increases to 1440p and then 4K, the GPU becomes the primary constraint. The RTX 2060's 6 GB of GDDR6 memory and 192-bit bus width, providing 336.0 GB/s of bandwidth, are sufficient for 1080p but become strained at higher pixel counts. The 4K results illustrate this clearly: even at Low settings, the average drops to 89 FPS, and Medium falls to 56 FPS. The GPU's Passmark G3D score of 14111 and its 58th percentile ranking among all GPUs indicate that it is a mid-range part, and the 4K data reflects that positioning.

The scaling between presets also shows the GPU's role. At 1080p, the difference between Low and Ultra is 61 FPS, while at 4K the same preset gap is 46 FPS. This smaller absolute difference at 4K suggests that the GPU is already near its limits, so preset changes have less impact relative to the baseline. The CPU's benchmark scores, including a Passmark multithread score of 25032 and a cinebench_r23_multicore score of 22604, place it in the 77th percentile among all CPUs, which is notably higher than the GPU's 58th percentile. This gap in relative performance explains why the CPU is not the bottleneck in this pairing.

The i5-13400F's nearest rivals include the AMD Ryzen 9 6900HS, with an average score of 25284 and a 0 percent delta, and the AMD Ryzen 7 6800H at 25201 with a 0.4 percent delta. These similar scores suggest that the CPU would perform comparably in Overpower if paired with the same GPU. The RTX 2060's nearest rivals, such as the NVIDIA GeForce RTX 3050 OEM with an average score of 15199 and a 0.6 percent delta, or the AMD Radeon RX 7600 at 15171 with a 0.8 percent delta, would likely produce similar frame rates at the same settings.

How This Combo Ranks

The combination of the i5-13400F and RTX 2060 ranks 2933 out of 3713 tested combos in Overpower, placing it in the 79th percentile. This means that roughly one in five tested combinations performs better in this game. The rank reflects the overall balance of the pairing: the CPU is strong enough to avoid holding back the GPU at most settings, but the GPU's mid-range capabilities limit the combo's ceiling, particularly at 4K.

The percentile ranking for the individual components supports this assessment. The CPU sits in the 77th percentile among all tested CPUs, while the GPU sits in the 58th percentile among all tested GPUs. The combo's 79th percentile ranking in the game is higher than both individual percentiles, which suggests that Overpower is somewhat more favorable to this pairing than the average workload. The game's genre, Action, may involve scenarios that benefit from the CPU's multi-threaded performance, as indicated by its 3dmark_16_threads score of 7314 and 3dmark_max_threads score of 7307.

The combo rank also reflects the playable settings data. At 1080p and 1440p, the combo achieves playable frame rates at multiple presets, which is a better outcome than many lower-ranked combinations. At 4K, only Low is playable, which is consistent with the GPU's 58th percentile ranking. The rank of 2933 suggests that there are 780 combinations that perform better, but also 780 combinations that perform worse, placing this pairing solidly in the upper-middle range of the database.

The measured FPS data shows that the combo is most competitive at lower resolutions. At 1080p Low, the 118 FPS average would likely rival many higher-end GPUs that are bottlenecked by weaker CPUs. At 4K Ultra, the 43 FPS average is clearly limited by the GPU, and this is where the combo loses ground to better graphics cards. The rank of 2933 represents a balance between these extremes.

Similar Performance Alternatives

For the CPU, the i5-13400F has several near-identical alternatives based on average benchmark scores. The AMD Ryzen 9 6900HS scores 25284, which is effectively the same as the i5-13400F's 25292, a delta of 0 percent. The AMD Ryzen 7 6800H scores 25201, a 0.4 percent difference. The Intel Core 5 120 scores 25362, which is 0.3 percent higher, and the AMD Ryzen 5 5600X3D scores 25365, also 0.3 percent higher. In Overpower, swapping the i5-13400F for any of these CPUs would produce nearly identical frame rates, assuming the same RTX 2060 is used.

For the GPU, the RTX 2060's nearest rivals are similarly close. The NVIDIA GeForce GTX 580 scores 15283, just 7 points below the RTX 2060's 15290, a delta of 0 percent. The AMD Radeon 680M scores 15270, a 0.1 percent difference. The NVIDIA GeForce RTX 3050 OEM scores 15199, a 0.6 percent delta, and the AMD Radeon RX 7600 scores 15171, a 0.8 percent delta. These GPUs would produce frame rates within a few percent of the RTX 2060 in Overpower, meaning the measured FPS data would be nearly identical at all resolutions and presets.

The combination of these near-identical parts means that a system with any of these CPUs and GPUs would deliver essentially the same experience. For example, an AMD Ryzen 9 6900HS with an RTX 2060 would likely show the same 68 FPS average at 1080p High, the same 61 FPS at 1440p High, and the same 89 FPS at 4K Low. The deltas are small enough that they would not be perceptible in normal gameplay.

The RTX 2060's nearest rivals include some interesting cases. The AMD Radeon RX 7600, despite being a newer architecture, scores within 0.8 percent of the RTX 2060 in the database's average benchmarks, so its performance in Overpower would be virtually indistinguishable. The GeForce GTX 580, a much older card, also scores within 0 percent, though its feature set differs. Users considering an upgrade from the RTX 2060 would need to look beyond these near-identical rivals to see meaningful gains.

FAQ

Q: Can this combo run Overpower at 60 FPS on 1080p?

A: Yes, at Low, Medium, and High settings. Low averages 118 FPS, Medium averages 74 FPS, and High averages 68 FPS. Ultra settings average 57 FPS, which is below the 60 FPS threshold.

Q: What is the best setting for 1440p with this hardware?

A: High settings are the most demanding preset that stays at or above 60 FPS, with an average of 61 FPS. Medium averages 66 FPS, Low averages 105 FPS, and Ultra averages 51 FPS, which is unplayable.

Q: Is 4K playable with the i5-13400F and RTX 2060?

A: Only at Low settings, which average 89 FPS. Medium averages 56 FPS, High averages 52 FPS, and Ultra averages 43 FPS, all below the 60 FPS threshold.

Q: How does this combo rank compared to other tested systems?

A: It ranks 2933 out of 3713 combinations, placing it in the 79th percentile. The CPU ranks in the 77th percentile among all CPUs, while the GPU ranks in the 58th percentile among all GPUs.

Q: Which CPUs would perform similarly to the i5-13400F in this game?

A: The AMD Ryzen 9 6900HS has a delta of 0 percent, the AMD Ryzen 7 6800H has a delta of 0.4 percent, and the Intel Core 5 120 and AMD Ryzen 5 5600X3D both have deltas of -0.3 percent. All would produce nearly identical frame rates.

Q: Are there GPUs that perform similarly to the RTX 2060?

A: Yes, the NVIDIA GeForce GTX 580 has a delta of 0 percent, the AMD Radeon 680M has a delta of 0.1 percent, the NVIDIA GeForce RTX 3050 OEM has a delta of 0.6 percent, and the AMD Radeon RX 7600 has a delta of 0.8 percent. These would yield similar FPS in Overpower.