Instant compatibility check with FPS benchmarks and optimization tips
Overpower
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Your GPU supports ray tracing.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 112 | 139 | 145 | 210 |
| 1440p QHD | 133 | 160 | 171 | 223 |
| 1080p Full HD | 152 | 179 | 195 | 233 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Overpower on Your System
The Intel Core i5-12400F paired with the NVIDIA GeForce RTX 5090 delivers exceptional performance in Overpower, a 2023 action title. Measured FPS data shows this combination exceeds the 60 FPS playable threshold by a wide margin across all tested resolutions and presets. At 4K, the average frame rate ranges from 112.4 FPS on Ultra to 209.8 FPS on Low, while 1440p and 1080p push even higher, indicating that this combo is not merely adequate but overwhelmingly capable of running the game at maximum fidelity with headroom for high-refresh-rate displays.
Measured FPS Breakdown
The benchmark data for Overpower provides average FPS figures for three resolutions and four quality presets, with no minimum or maximum frame rate values recorded. The results are uniformly strong, with the lowest average being 112.4 FPS at 3840x2160 Ultra settings — still nearly double the 60 FPS playable threshold. At 1080p, the combination reaches an average of 233.3 FPS on Low settings, demonstrating that the RTX 5090’s raw compute power is largely unconstrained at lower resolutions.
1920x1080: At the most common gaming resolution, the combo delivers 233.3 FPS on Low, 194.6 FPS on Medium, 178.5 FPS on High, and 151.9 FPS on Ultra. The gap between Low and Ultra is 81.4 FPS, or approximately 35% lower performance when moving to the highest preset. This scaling suggests that the CPU is not a limiting factor at 1080p, as the GPU still manages to produce frame rates well above 150 FPS even with maximum graphical load.
2560x1440: Moving to 1440p shows a predictable decline, but the results remain stellar. Low settings yield 223.2 FPS, Medium produces 171.4 FPS, High hits 160.4 FPS, and Ultra maintains 133.1 FPS. The drop from 1080p to 1440p at Ultra settings is 18.8 FPS, a reduction of roughly 12.4%. This modest decrease indicates that the RTX 5090 has substantial bandwidth and shading resources to absorb the additional pixel count without severe penalties.
3840x2160: At 4K, the most demanding resolution tested, the combo still delivers triple-digit averages across all presets. Low settings achieve 209.8 FPS, Medium reaches 145.1 FPS, High produces 138.7 FPS, and Ultra maintains 112.4 FPS. The transition from 1440p to 4K at Ultra costs 20.7 FPS, representing a 15.6% performance reduction. Notably, the gap between Low and Ultra at 4K is 97.4 FPS, which is larger than at lower resolutions, underscoring how pixel fill rate becomes more critical as resolution increases.
The pattern across all resolutions shows a consistent hierarchy: Low is fastest, followed by Medium, then High, with Ultra being the slowest. The relative differences between presets shrink as resolution rises; for instance, Ultra is 34.9% slower than Low at 1080p, but only 46.4% slower at 4K. This indicates that the GPU’s compute units are more fully utilized at higher resolutions, making preset choices less impactful on overall FPS.
FAQ
*Q: Can this PC run Overpower at 60 FPS?*
A: Yes, the data shows every tested resolution and preset combination exceeds 60 FPS. The lowest average recorded is 112.4 FPS at 3840x2160 Ultra settings, which is 87% above the 60 FPS playable threshold.
Q: What is the best settings preset at 4K resolution?
A: At 3840x2160, the Ultra preset is playable with an average of 112.4 FPS. All four presets (Low, Medium, High, Ultra) clear the 60 FPS threshold, so the most demanding option remains fully playable.
Q: How much performance is lost when moving from 1080p to 4K?
A: At Ultra settings, the average FPS drops from 151.9 at 1920x1080 to 112.4 at 3840x2160, a 39.5 FPS reduction or approximately 26% lower performance. At Low settings, the drop is from 233.3 to 209.8 FPS, a 23.5 FPS decrease.
Q: Which is faster, Low or Ultra settings?
A: Low settings consistently produce the highest frame rates across all resolutions. At 1080p, Low averages 233.3 FPS versus 151.9 FPS for Ultra; at 1440p, 223.2 versus 133.1; and at 4K, 209.8 versus 112.4.
Q: Does the RTX 5090 bottleneck the i5-12400F in this game?
A: The benchmark results show high frame rates at all resolutions, but the scaling from 1080p to 4K suggests the GPU is the primary driver. At 1080p Low settings, the 233.3 FPS average indicates the CPU can feed the GPU sufficiently, though the exact bottleneck location is not directly identified in the data.
Q: Is the RTX 5090’s performance consistent across all presets?
A: The data shows a clear hierarchy, with Ultra settings costing approximately 35-46% performance versus Low, depending on resolution. The largest absolute difference is at 4K, where Low averages 209.8 FPS and Ultra averages 112.4 FPS.
Similar Performance Alternatives
The nearest rival for the Intel Core i5-12400F is the AMD Ryzen 5 7535HS, which has an average benchmark score of 19047 versus the i5-12400F’s 19039, a delta of 0%. The Intel Core 3 201E scores 19056 (-0.1%), the Intel Core i5-1335U scores 18982 (+0.3%), and the AMD EPYC 7773X scores 18979 (+0.3%). These alternatives would behave similarly in CPU-bound scenarios, though the i5-12400F’s desktop socket and 65 W TDP differentiate it from the mobile and server parts in the list.
For the GPU, the NVIDIA GeForce RTX 5090’s nearest rivals are unusual in that they are largely older or specialized hardware. The NVIDIA Tesla P100 PCIe 16 GB has an average score of 79605, which is 0.3% lower than the RTX 5090’s 79842. The Tesla P100 PCIe 12 GB scores 79396 (+0.6%), the AMD Radeon RX 6850M XT scores 78940 (+1.1%), and the AMD Radeon Pro Vega 64X scores 80959 (-1.4%). None of these are direct consumer gaming equivalents, but the data indicates that the RTX 5090’s benchmark position is close to these compute-focused cards, suggesting that in Overpower the visual results would be similar only in raw throughput, not in feature support like ray tracing or DLSS.
In practical terms, a system using any of the CPU rivals would likely produce identical FPS in Overpower if paired with the RTX 5090, since the game appears GPU-bound at the settings tested. Conversely, swapping the RTX 5090 for a Tesla P100 would likely reduce gaming performance significantly due to driver and architecture differences, despite similar average benchmark scores.
The Verdict
The verdict from the data is unambiguous: this PC can run Overpower at every tested resolution and preset well above the 60 FPS threshold. The verdictByResolution field confirms that all playable settings include High, Low, Medium, and Ultra at 3840x2160, 2560x1440, and 1920x1080. The best settings at each resolution are Ultra, with average FPS of 112.4 at 4K, 133.1 at 1440p, and 151.9 at 1080p.
This means users can enable the highest visual quality without sacrificing smoothness. Even at 4K Ultra, the 112.4 FPS average provides a comfortable margin above 60 FPS, allowing for frame rate dips without dropping below the playable threshold. At 1440p and 1080p, the frame rates are high enough to drive 120 Hz or 144 Hz displays, though no refresh rate data is provided in the fact pack. The RTX 5090’s 32 GB of GDDR7 memory and 1.79 TB/s bandwidth are more than sufficient for the game’s demands, and the i5-12400F’s 6 cores and 12 threads do not appear to hold the system back.
CPU and GPU Roles
The data indicates that the GPU is the dominant component in Overpower, with CPU influence diminishing as resolution increases. At 1080p, the difference between Low and Ultra settings is 81.4 FPS (233.3 versus 151.9), which suggests the GPU is doing most of the work even at lower resolutions. If the CPU were the bottleneck, we would expect the FPS to plateau regardless of preset, but the wide spread shows the GPU is scaling with graphical load.
At 4K, the spread between Low and Ultra grows to 97.4 FPS (209.8 versus 112.4), which is a larger absolute gap but a smaller percentage difference (46.4% versus 34.9% at 1080p). This pattern is consistent with a GPU-bound scenario: as resolution increases, the GPU becomes more saturated, and the relative impact of preset changes shrinks. The i5-12400F’s 3dmark single-thread score of 909 and passmark single-thread score of 3481 are adequate for feeding the RTX 5090, but the data does not isolate CPU-only performance.
The scaling between resolutions provides further evidence. At Ultra settings, moving from 1080p to 1440p reduces FPS from 151.9 to 133.1, a 12.4% drop, and moving to 4K reduces it to 112.4, another 15.6% drop. These are typical GPU-bound scaling characteristics, where pixel count directly impacts frame rate. The CPU’s role is likely to maintain a high enough frame submission rate, which it does successfully given the 233.3 FPS peak at 1080p Low.
Best Settings per Resolution
For each resolution, the most demanding preset that stays at or above 60 FPS is Ultra, and the exact average FPS at that setting is as follows:
- 3840x2160: Ultra preset, average 112.4 FPS
- 2560x1440: Ultra preset, average 133.1 FPS
- 1920x1080: Ultra preset, average 151.9 FPS
Since all presets are playable, there is no need to compromise on visual quality. The data shows that even the heaviest settings leave substantial headroom. For users with high-refresh-rate monitors, the Low preset at 1080p (233.3 FPS) or 1440p (223.2 FPS) would be the choice to maximize frame rate, while the Ultra preset at 4K still provides a smooth experience for standard 60 Hz displays.
How This Combo Ranks
The Intel Core i5-12400F + NVIDIA GeForce RTX 5090 combination ranks 120th out of 3713 tested combos in Overpower, placing it in the top 3.2% of all systems benchmarked. This high ranking is primarily attributable to the RTX 5090, which sits in the 92nd percentile of all GPUs with an average benchmark score of 79842. The CPU, by contrast, is in the 73rd percentile of all CPUs with an average score of 19039, indicating that the GPU is the standout component in this pairing.
The rank of 120 out of 3713 suggests that a small number of combinations outperform this system, likely those pairing the RTX 5090 with higher-end CPUs such as the Core i9 or Ryzen 9 parts. However, the measured FPS data shows that the i5-12400F does not meaningfully constrain the RTX 5090 in Overpower, as even the 4K Ultra result of 112.4 FPS is far above the playable threshold. The combo’s ranking reflects the GPU’s dominance in this title, and the CPU’s mid-tier position does not prevent excellent playability.