Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Overpower
Action 2023

Overpower

75%
Great Match Your system meets recommended requirements.

Performance

1080p (Full HD)

Low 1080p Measured
229 FPS
Ultra 1080p Measured
136 FPS

1440p (2K / QHD)

Low 1440p Measured
225 FPS
Ultra 1440p Measured
124 FPS

4K (Ultra HD)

Low 4K Measured
210 FPS
Ultra 4K Measured
102 FPS
5.9ms Frame Time
9ms Input Latency
4K Best Resolution

Requirements Check

Processor
Required 37,513
Your CPU 19,039
Graphics Card
Required 27,382
Your GPU 56,083

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 102 126 137 210
1440p QHD 124 149 161 225
1080p Full HD 136 169 181 229

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 169
1920x1080 Low 229
1920x1080 Medium 181
1920x1080 Ultra 136
2560x1440 High 149
2560x1440 Low 225
2560x1440 Medium 161
2560x1440 Ultra 124
3840x2160 High 126
3840x2160 Low 210
3840x2160 Medium 137
3840x2160 Ultra 102

Performance Analysis: Overpower on Your System

The Intel Core i5-12400F paired with the NVIDIA GeForce RTX 5080 delivers a commanding performance profile in Overpower, with benchmark results showing this combination clears the 60 FPS playability threshold at every tested resolution and preset. The data indicates a system that is heavily GPU-bound at higher resolutions, while the CPU’s 6-core, 12-thread configuration remains sufficient to feed the RTX 5080 even at 1080p.

Best Settings per Resolution

At 3840x2160, the most demanding preset that sustains an average framerate at or above 60 FPS is Ultra, which posts an average of 101.9 FPS. This is a significant margin over the playability threshold, meaning the system holds Ultra settings with over 40 FPS of headroom. The next step down, High, runs at 125.6 FPS, while Medium hits 136.7 FPS and Low reaches 210.3 FPS.

Moving to 2560x1440, the best playable setting is again Ultra, with an average of 124.1 FPS. The scaling from 4K to 1440p shows a 22 FPS uplift at Ultra, demonstrating that the RTX 5080 has ample compute headroom at this resolution. High runs at 148.5 FPS, Medium at 160.7 FPS, and Low at 224.7 FPS, all well above the 60 FPS target.

At 1920x1080, the highest preset that remains playable is Ultra, producing an average of 135.5 FPS. Notably, the jump from 1440p to 1080p at Ultra is only 11.4 FPS (from 124.1 to 135.5), suggesting the CPU begins to limit scaling at lower resolutions. High runs at 169.1 FPS, Medium at 180.9 FPS, and Low at 228.9 FPS. Across all three resolutions, Ultra is the recommended maximum preset, with the system never dipping below the 60 FPS floor even under the heaviest settings.

CPU and GPU Roles

The performance scaling across resolutions reveals a clear division of labor. At 4K, the RTX 5080 is the dominant factor: dropping from Ultra to Low at 3840x2160 increases framerate from 101.9 FPS to 210.3 FPS, a 106% improvement. This massive uplift indicates the GPU is the primary bottleneck at 4K, with rendering resolution directly taxing the graphics card’s 16 GB of GDDR7 memory and 10752 shading units.

At 1440p, the pattern shifts slightly. The spread between Ultra and Low is 224.7 FPS versus 124.1 FPS, a 81% delta. The absolute numbers are higher, but the relative gain from lowering settings is smaller than at 4K, suggesting the CPU begins to exert more influence. The i5-12400F’s boost clock of 4.40 GHz and 18 MB of shared L3 cache are sufficient to keep up, but the framerate ceiling is approaching.

At 1080p, the CPU’s role becomes more pronounced. The difference between Ultra and Low is 228.9 FPS versus 135.5 FPS, a 69% improvement. Crucially, the framerate gain from lowering resolution from 1440p to 1080p at Ultra is only 11.4 FPS, while at Low it is just 4.2 FPS (224.7 to 228.9). This compressed scaling indicates the CPU is nearing its practical limit for feeding frames at 1080p; the GPU is no longer the sole constraint. The data suggests that for competitive play at 1080p, the i5-12400F’s 3DMark single-thread score of 909 and multi-thread score of 5912 become the limiting factors, though the system still delivers far above 60 FPS.

Measured FPS Breakdown

3840x2160 (4K)

  • Ultra: 101.9 FPS average
  • High: 125.6 FPS average
  • Medium: 136.7 FPS average
  • Low: 210.3 FPS average

At 4K, the RTX 5080’s raw throughput dominates. The gap between Medium and Low is particularly large (73.6 FPS), indicating that Low settings remove significant rendering load. The gap between Ultra and High is 23.7 FPS, while High to Medium is 11.1 FPS. This non-linear scaling is typical of GPU-bound scenarios where certain effects (like shadows and reflections) have outsized costs.

2560x1440 (1440p)

  • Ultra: 124.1 FPS average
  • High: 148.5 FPS average
  • Medium: 160.7 FPS average
  • Low: 224.7 FPS average

At 1440p, the framerates are uniformly higher. The delta between Ultra and High is 24.4 FPS, and High to Medium is 12.2 FPS. The Low preset is a massive outlier at 224.7 FPS, suggesting it disables features that otherwise consume significant GPU resources. The CPU’s influence is visible in the reduced scaling from Medium to Low (64 FPS) compared to 4K (73.6 FPS).

1920x1080 (1080p)

  • Ultra: 135.5 FPS average
  • High: 169.1 FPS average
  • Medium: 180.9 FPS average
  • Low: 228.9 FPS average

At 1080p, the pattern changes. The delta between Ultra and High is 33.6 FPS, the largest such gap across all resolutions, indicating the CPU can more easily feed frames when GPU load is lower. The jump from High to Medium is just 11.8 FPS, and Medium to Low is 48 FPS. The 1080p Ultra score of 135.5 FPS is only 11.4 FPS higher than 1440p Ultra, a compression that underscores the CPU bottleneck emerging at lower resolutions.

The Verdict

The data is unambiguous: this PC can run Overpower with ease. The verdictByResolution data confirms that all four settings presets — Low, Medium, High, and Ultra — are playable at every resolution tested, with the best settings being Ultra at each step.

At 3840x2160, the system delivers 101.9 FPS on Ultra, which is 41.9 FPS above the playable threshold of 60 FPS. At 2560x1440, Ultra runs at 124.1 FPS, a 64.1 FPS margin. At 1920x1080, Ultra posts 135.5 FPS, clearing the threshold by 75.5 FPS. The lowest recorded average across all tests is the 4K Ultra figure, and even that is nearly 70% above the 60 FPS target.

The RTX 5080’s percentile ranking of 87 among all GPUs, combined with its 3DMark Steel Nomad DX12 score of 8637, positions it as a high-end part that easily handles this title. The i5-12400F, with a percentile rank of 73 among all CPUs, does not hold the system back at 4K or 1440p, though 1080p shows signs of CPU limitation. For users targeting high-refresh monitors, the 1080p Low preset at 228.9 FPS or 1440p Low at 224.7 FPS will satisfy fast-paced action, while visual fidelity seekers can max out Ultra at any resolution.

Similar Performance Alternatives

For the CPU, the Intel Core i5-12400F’s nearest rivals, based on average benchmark scores, include the AMD Ryzen 5 7535HS with an average score of 19047 and a deltaPct of 0, meaning performance parity within a rounding error. The Intel Core 3 201E scores 19056, just 0.1% higher, while the Intel Core i5-1335U scores 18982, 0.3% lower. The AMD EPYC 7773X also scores 18979, 0.3% lower. These chips would behave similarly in Overpower at 1080p where the CPU matters most, though the EPYC 7773X is a server part with different platform characteristics. The tight deltaPct values (all within 0.3%) suggest users swapping between these CPUs would see negligible framerate differences.

For the GPU, the AMD Radeon 8060S is the closest rival with an average score of 55757, just 0.6% lower than the RTX 5080’s 56083. The AMD Radeon RX 6750 GRE 12 GB scores 55698, 0.7% lower. The AMD Radeon Pro W5700X is 2.3% slower at 54828, while the AMD Radeon RX 9070 GRE is 2.2% faster at 57367. In Overpower, the RX 9070 GRE would deliver slightly higher framerates at 4K Ultra, while the Radeon 8060S and RX 6750 GRE would land within a few FPS of the RTX 5080. The RTX 5080’s 16 GB VRAM versus the RX 6750 GRE’s 12 GB could matter at 4K, but the measured FPS data suggests the game is not VRAM-limited at these settings.

How This Combo Ranks

The Intel Core i5-12400F and NVIDIA GeForce RTX 5080 combination ranks 194th out of 3713 tested combos in Overpower, placing it in the top 5.2% of all systems. This percentile ranking reflects the GPU’s strong showing — the RTX 5080 sits in the 87th percentile among all GPUs — while the CPU’s 73rd percentile is the weaker link. The rank of 194 indicates that 193 other combinations manage higher average framerates, likely those pairing the RTX 5080 with higher-end CPUs like the Core i7 or i9 variants, or AMD’s Ryzen 7 and 9 parts.

Given that the system already exceeds 100 FPS at 4K Ultra, the difference between this combo and those ranked above it is likely marginal in practice, primarily manifesting at 1080p where the CPU bottleneck becomes apparent. The data suggests that upgrading the i5-12400F to a chip with higher single-thread performance (the 3DMark single-thread score of 909 is the baseline) would yield modest gains at 1080p but little change at 4K. For most users, the 194th rank out of 3713 is an excellent result, confirming this pairing as a high-performance solution for Overpower across all resolutions and settings.