Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Overpower
Action 2023

Overpower

75%
Great Match Your system meets recommended requirements.

Performance

1080p (Full HD)

Low 1080p Measured
226 FPS
Ultra 1080p Measured
110 FPS

1440p (2K / QHD)

Low 1440p Measured
202 FPS
Ultra 1440p Measured
99 FPS

4K (Ultra HD)

Low 4K Measured
172 FPS
Ultra 4K Measured
82 FPS
7.5ms Frame Time
11ms Input Latency
4K Best Resolution

Requirements Check

Processor
Required 37,513
Your CPU 19,039
Graphics Card
Required 27,382
Your GPU 40,377

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 82 104 111 172
1440p QHD 99 118 130 202
1080p Full HD 110 134 145 226

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 134
1920x1080 Low 226
1920x1080 Medium 145
1920x1080 Ultra 110
2560x1440 High 118
2560x1440 Low 202
2560x1440 Medium 130
2560x1440 Ultra 99
3840x2160 High 104
3840x2160 Low 172
3840x2160 Medium 111
3840x2160 Ultra 82

Performance Analysis: Overpower on Your System

The Intel Core i5-12400F paired with the NVIDIA GeForce RTX 5070 delivers a uniformly high-performance experience in Overpower, clearing the 60 FPS playable threshold at every tested resolution and preset combination. The measured frame rates range from a low of 81.6 FPS at 4K Ultra to a high of 225.7 FPS at 1080p Low, indicating that this combo is not merely playable but offers substantial headroom for high-refresh-rate displays at lower resolutions. The RTX 5070, with its 12 GB of GDDR7 memory and 672.0 GB/s bandwidth, appears to be the dominant factor in this pairing, while the i5-12400F’s six-core, twelve-thread configuration proves sufficient to avoid bottlenecking even at 1080p.

FAQ

Q: At what resolution and settings does this combo achieve the highest average frame rate?

A: The highest average frame rate is 225.7 FPS, achieved at 1920x1080 with Low settings. The lowest average frame rate among all tested configurations is 81.6 FPS, recorded at 3840x2160 with Ultra settings.

Q: Is the RTX 5070’s performance consistent across different resolutions?

A: The data shows a predictable scaling pattern. At Ultra settings, average FPS drops from 109.8 at 1080p, to 98.6 at 1440p, and finally to 81.6 at 4K. This represents a 25.7% reduction from the 1080p figure when moving to 4K, indicating strong scaling but with the expected performance cost at higher pixel counts.

Q: What is the best settings preset to use at 2560x1440?

A: According to the verdict data, Ultra is the best settings preset at 2560x1440, delivering an average of 98.6 FPS. This is well above the 60 FPS playable threshold, and the frame rate remains smooth even at the highest quality level.

*Q: How does this combo rank among all tested systems in Overpower?*

A: This specific combination of the Intel Core i5-12400F and NVIDIA GeForce RTX 5070 ranks 647th out of 3713 tested combos, placing it in the top 17.4% of all systems tested for this game.

Q: Does the CPU or GPU show any signs of being a limiting factor at 1080p?

A: The frame rate deltas between resolutions suggest the GPU is the primary driver. At Low settings, moving from 1080p (225.7 FPS) to 1440p (201.7 FPS) results in a 10.6% drop, while moving to 4K (171.9 FPS) results in a 23.8% drop from 1080p. The relatively smaller drop at 1440p indicates the CPU can still feed the GPU adequately, though the GPU load is clearly increasing.

Q: What is the launch MSRP for each component?

A: The Intel Core i5-12400F has a launch MSRP of $174. The NVIDIA GeForce RTX 5070 has a launch MSRP of 549 USD.

Similar Performance Alternatives

The nearest rivals for the Intel Core i5-12400F, based on average benchmark scores, include the AMD Ryzen 5 7535HS, which posts a nearly identical average score of 19047 (a 0% delta), and the Intel Core 3 201E with an average score of 19056 (a -0.1% delta). The Intel Core i5-1335U and AMD EPYC 7773X also sit nearby with scores of 18982 and 18979 respectively, showing deltas of 0.3%. These processors all fall within a tight performance band around the i5-12400F’s average score of 19039, meaning any of these would likely produce very similar CPU-bound behavior in Overpower, though the mobile and embedded variants may have different thermal and power characteristics.

On the GPU side, the RTX 5070’s nearest rivals according to average benchmark scores are the AMD Radeon Pro 580 (score 40318, delta 0.1%), the AMD Radeon Pro WX 7100 (score 40063, delta 0.8%), and the AMD Radeon Pro 5300 (score 40870, delta -1.2%). The NVIDIA RTX A500 Mobile also appears with a score of 39568 and a delta of 2%. These professional and mobile workstation GPUs offer comparable raw compute scores, though the RTX 5070’s gaming-specific features and 12 GB GDDR7 memory may result in different real-world gaming performance. For the purposes of Overpower, any of these GPU alternatives would likely deliver frame rates in a similar range, though the desktop-oriented RTX 5070 should maintain the highest sustained performance in a standard desktop chassis.

CPU and GPU Roles

The benchmark results for Overpower clearly demonstrate that the GPU is the dominant component in this pairing across all tested resolutions. At 1080p, the frame rate spread from Low to Ultra is 225.7 FPS down to 109.8 FPS, a 51.3% reduction. This large spread indicates that the GPU’s workload scales significantly with visual quality settings, while the CPU maintains a stable enough frame delivery to allow the GPU to express its full range. The i5-12400F’s single-thread and multi-thread scores, such as 909 in 3dmark_single_thread and 12380 in Cinebench R23 multi-core, are sufficient to keep up with the RTX 5070’s output at this resolution.

As resolution increases, the GPU’s role becomes even more pronounced. At 4K Ultra, the average frame rate is 81.6 FPS, which is 25.7% lower than the 109.8 FPS seen at 1080p Ultra. This drop is consistent with a GPU-bound scenario where pixel throughput becomes the limiting factor. The CPU’s relative contribution diminishes at higher resolutions, as the frame rate differences between settings presets compress slightly. For example, at 4K, the gap between Low and Ultra is 171.9 FPS versus 81.6 FPS, a 52.5% reduction, which is similar to the 1080p gap. This suggests that even at 4K, the CPU is not a bottleneck, and the RTX 5070’s compute capabilities, including its 30.87 TFLOPS FP32 throughput, are what determine the final frame rates.

The scaling from 1080p to 1440p at each preset shows a moderate GPU load increase. At Ultra, the drop is from 109.8 to 98.6 FPS (a 10.2% reduction), while at Low, the drop is from 225.7 to 201.7 FPS (a 10.6% reduction). This uniform percentage drop across presets indicates a consistent GPU-bound behavior, where the CPU’s role remains static. The i5-12400F’s 18 MB shared L3 cache and 65 W TDP are ample for feeding the GPU, and the data shows no evidence of CPU stalls at any resolution or preset.

The Verdict

This PC configuration can run Overpower with ease at all tested resolutions and settings. The verdict data shows that at 3840x2160, all four settings presets—High, Low, Medium, and Ultra—are playable, with the best setting being Ultra at an average of 81.6 FPS. At 2560x1440, the same is true, with Ultra achieving 98.6 FPS. At 1920x1080, Ultra reaches 109.8 FPS, and even the most demanding preset stays well above the 60 FPS playable threshold. The lowest average frame rate recorded across all configurations is 81.6 FPS at 4K Ultra, which still provides a 36% margin above the 60 FPS target.

Given these results, the combo clears 60 FPS at every resolution and preset, making it suitable for high-refresh-rate gaming at 1080p and 1440p, and for smooth 60+ FPS gameplay at 4K with maximum settings. The RTX 5070’s 12 GB of GDDR7 memory and the i5-12400F’s solid multi-threaded performance ensure that even the most demanding scenes in Overpower will maintain fluid frame pacing.

How This Combo Ranks

The combination of the Intel Core i5-12400F and NVIDIA GeForce RTX 5070 achieves a rank of 647 out of 3713 tested combos in Overpower. This places it in the 82.6th percentile of all tested systems, meaning it outperforms the majority of configurations evaluated for this game. The rank reflects a well-balanced pairing where the GPU’s high benchmark scores—such as 29137 in Passmark G3D and 5077 in 3DMark Steel Nomad DX12—are complemented by the CPU’s respectable average benchmark score of 19039.

In comparison to other combos, this system is positioned to handle Overpower’s action-oriented gameplay with substantial headroom. The top 17.4% ranking indicates that while there are faster systems, this combo’s performance is more than adequate for a smooth experience at all tested settings. The GPU’s percentile rank of 82 versus the CPU’s percentile rank of 73 suggests that the graphics card is the stronger component relative to its peers, which aligns with the observed frame rates being GPU-bound in most scenarios.

Best Settings per Resolution

At 1920x1080, the best settings preset is Ultra, which delivers an average of 109.8 FPS. This is the highest quality level available and still maintains a frame rate nearly double the 60 FPS playable threshold, ensuring a very smooth experience on standard 60 Hz and 120 Hz displays alike.

At 2560x1440, Ultra is also the best settings preset, achieving an average of 98.6 FPS. This provides excellent visual fidelity while keeping the frame rate well above the playable threshold, making it suitable for high-refresh-rate 1440p monitors.

At 3840x2160, Ultra remains the best settings preset, with an average of 81.6 FPS. While this is lower than at lower resolutions, it still comfortably exceeds the 60 FPS target, allowing for a fully maxed-out 4K experience without compromising on quality settings.

Measured FPS Breakdown

At 1920x1080, the measured average frame rates are 225.7 FPS on Low, 145.4 FPS on Medium, 134.4 FPS on High, and 109.8 FPS on Ultra. The progression from Low to Ultra shows a clear step-down in performance, with the largest single drop occurring between Low and Medium (a 35.6% reduction). The spread between the lowest and highest settings is 115.9 FPS.

At 2560x1440, the average frame rates are 201.7 FPS on Low, 130.2 FPS on Medium, 117.6 FPS on High, and 98.6 FPS on Ultra. Compared to 1080p, the Low setting drops by 10.6%, Medium by 10.5%, High by 12.5%, and Ultra by 10.2%. This consistent reduction across all presets confirms that the GPU is scaling uniformly with resolution.

At 3840x2160, the average frame rates are 171.9 FPS on Low, 110.9 FPS on Medium, 103.9 FPS on High, and 81.6 FPS on Ultra. The drop from 1440p to 4K is more pronounced, with Low falling by 14.8%, Medium by 14.8%, High by 11.6%, and Ultra by 17.2%. The Ultra preset at 4K shows the largest relative performance penalty, but it still remains above the 60 FPS threshold. No minimum or maximum frame rate data was recorded, so the analysis is based solely on average FPS values.