Instant compatibility check with FPS benchmarks and optimization tips
Overpower
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Your GPU supports ray tracing.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 102 | 123 | 133 | 209 |
| 1440p QHD | 120 | 145 | 156 | 221 |
| 1080p Full HD | 135 | 163 | 175 | 229 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Overpower on Your System
The Intel Core i5-12400 paired with the NVIDIA GeForce RTX 5080 delivers an exceptionally strong performance profile in Overpower, with benchmark results showing every tested resolution and preset combination clearing the 60 FPS playability threshold by a wide margin. The data indicates a system capable of maxing out the game's visual settings at 4K while maintaining an average frame rate of 102 FPS, a figure that rises to 135 FPS at 1080p Ultra. This combination ranks 261st out of 3,713 tested configurations, placing it in the top 7% of all systems evaluated for this title.
FAQ
*Q: Can this PC run Overpower at 4K with maximum settings?*
A: Yes. At 3840x2160 resolution with Ultra settings, the combination achieves an average of 102 FPS, which is well above the 60 FPS playability threshold.
Q: What is the best playable preset at 2560x1440?
A: The Ultra preset is fully playable at 1440p, delivering an average of 120 FPS. All four presets (Low, Medium, High, Ultra) surpass 60 FPS at this resolution.
Q: How does the frame rate scale from 1080p to 4K?
A: At Ultra settings, the average FPS drops from 135 at 1920x1080 to 120 at 2560x1440, then to 102 at 3840x2160. This represents a 24.4% reduction from 1080p to 4K, indicating that the GPU remains strong even at higher pixel counts.
Q: Which component is the bottleneck at lower resolutions?
A: At 1080p, the CPU's performance becomes more relevant relative to the GPU. The i5-12400 has a single-thread score of 910 in 3DMark and a Cinebench R23 single-core score of 2257, which supports the high frame rates observed at lower resolutions.
Q: How does the RTX 5080 compare to its nearest GPU rivals?
A: The RTX 5080 has an average benchmark score of 56,083, which is 2.2% lower than the AMD Radeon RX 9070 GRE but 0.6% higher than the AMD Radeon 8060S. It sits in the 87th percentile of all GPUs.
Q: Is the Core i5-12400 a limiting factor for this game?
A: The CPU's 72nd percentile ranking suggests it is competent but not elite. However, the data shows no preset at any resolution drops below 102 FPS, so the CPU does not appear to create a noticeable bottleneck in Overpower.
Similar Performance Alternatives
The CPU's average benchmark score of 18,683 places it in close company with several other processors. The AMD EPYC 7643 scores 18,697, a mere 0.1% difference, making it functionally identical in synthetic workloads. The Intel Core i7-1355U trails by 0.3% with a score of 18,730, while the AMD Ryzen AI 5 330 is 0.7% ahead at 18,811. The Intel Core i3-14100F is the closest lower-performing option, scoring 18,519, which is 0.9% behind. Gamers upgrading from the i3-14100F would see negligible performance changes in Overpower, as the delta is well within run-to-run variance.
For the GPU, the nearest rival is the AMD Radeon RX 9070 GRE, which outperforms the RTX 5080 by 2.2% with an average score of 57,367. The AMD Radeon 8060S is nearly identical, scoring 55,757 (0.6% lower), and the AMD Radeon RX 6750 GRE 12 GB scores 55,698 (0.7% lower). The AMD Radeon Pro W5700X trails by 2.3% at 54,828. In practical terms, any of these GPUs would deliver comparable frame rates in Overpower, with the RX 9070 GRE being the only one that might edge out the RTX 5080 by a small margin. The RX 6750 GRE 12 GB, despite being a different tier, produces nearly identical average scores, suggesting similar real-world performance in this title.
CPU and GPU Roles
The measured FPS data reveals how the workload shifts between components across resolutions. At 1080p, the system produces 229 FPS on Low, 175 FPS on Medium, 163 FPS on High, and 135 FPS on Ultra. The relatively small gap between Low and Ultra (69.5% increase in frame rate when dropping from Ultra to Low) suggests that at this resolution, the GPU is not fully saturated, and the CPU's 6-core, 12-thread configuration with a 4.40 GHz boost clock is handling the game's logic efficiently. The single-thread performance, evidenced by a 3DMark single-thread score of 910, is sufficient to feed the GPU at these high rates.
Moving to 1440p, the frame rates decrease modestly: 221 FPS on Low, 156 FPS on Medium, 145 FPS on High, and 120 FPS on Ultra. The percentage drop from 1080p to 1440p at Ultra settings is 11.1%, which is less than the 15% increase in pixel count, indicating that the GPU still has headroom and the CPU continues to keep pace.
At 4K, the GPU becomes the dominant factor. The RTX 5080's 16 GB of GDDR7 memory and 960.0 GB/s bandwidth are heavily utilized, producing 209 FPS on Low, 133 FPS on Medium, 123 FPS on High, and 102 FPS on Ultra. The drop from 1440p to 4K at Ultra is 15%, which aligns closely with the pixel count increase. The CPU's role diminishes here, as the frame rates are still high enough that the i5-12400's 18 MB of L3 cache and 12 threads do not create a bottleneck. Across all resolutions, the GPU scaling is consistent, while the CPU's influence is most apparent at 1080p where the frame rates exceed 200 FPS on Low settings.
How This Combo Ranks
This specific combination of the Intel Core i5-12400 and NVIDIA GeForce RTX 5080 ranks 261st out of 3,713 tested combos for Overpower, placing it in the top 7.0% of all systems. This is a strong result, but it is notable that the ranking is influenced by the CPU, which sits in the 72nd percentile of all processors. The GPU, by contrast, is in the 87th percentile, meaning the CPU is the weaker link in this pairing. Systems with higher-ranked CPUs (e.g., those in the 90th+ percentile) paired with the same GPU would likely rank higher, as the CPU's 3DMark max-threads score of 5,890 is modest compared to top-tier processors. However, the measured FPS data shows that this CPU is not holding back the GPU in Overpower, as even at 4K Ultra, the system maintains 102 FPS, which is far above the 60 FPS threshold. The rank of 261 suggests that while many combos are faster, this one delivers a smooth, high-refresh experience without compromise.
The Verdict
Yes, this PC can run Overpower with exceptional headroom across all resolutions. The verdict by resolution confirms that all four presets (Low, Medium, High, Ultra) are playable at every resolution tested, with the playable threshold set at 60 FPS. At 3840x2160, the best settings are Ultra, yielding an average of 102 FPS. At 2560x1440, Ultra produces 120 FPS, and at 1920x1080, Ultra reaches 135 FPS. The minimum FPS recorded for Medium settings at each resolution are 113 FPS (4K), 133 FPS (1440p), and 149 FPS (1080p), indicating that even the most demanding scenes stay well above the 60 FPS floor. This system is not merely playable; it is overqualified for 60 FPS gaming, offering high-refresh-rate potential even at 4K. The only scenario where this combo might struggle is if the user demands 120+ FPS at 4K Ultra, which is not achievable (102 FPS), but for standard 60 FPS gaming, it is flawless.
Best Settings per Resolution
At 3840x2160, the most demanding preset that maintains at least 60 FPS is Ultra, with an average of 102 FPS. This is the highest quality setting available, and it clears the threshold by a comfortable 70% margin. Lower presets provide even more headroom: Medium averages 133 FPS, High averages 123 FPS, and Low averages 209 FPS.
At 2560x1440, the best settings are also Ultra, producing an average of 120 FPS. The Medium preset averages 156 FPS, High averages 145 FPS, and Low reaches 221 FPS. All options are viable for 60 FPS gaming, but Ultra is the recommended choice for maximum visual fidelity.
At 1920x1080, the optimal preset is Ultra, with an average of 135 FPS. This is the highest frame rate among the Ultra presets across all resolutions, and it still leaves room for future driver optimizations or background tasks. The Medium preset averages 175 FPS, High averages 163 FPS, and Low tops out at 229 FPS. For users with 144Hz monitors, Ultra at 1080p is borderline (135 FPS), but dropping to High (163 FPS) would provide a more consistent experience above the refresh rate.