Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Overpower
Action 2023

Overpower

73%
Great Match Your system meets recommended requirements.

Performance

1080p (Full HD)

Low 1080p Measured
198 FPS
Ultra 1080p Measured
149 FPS

1440p (2K / QHD)

Low 1440p Measured
193 FPS
Ultra 1440p Measured
132 FPS

4K (Ultra HD)

Low 4K Measured
182 FPS
Ultra 4K Measured
111 FPS
6.3ms Frame Time
9ms Input Latency
4K Best Resolution

Requirements Check

Processor
Required 37,513
Your CPU 17,177
Graphics Card
Required 27,382
Your GPU 79,842

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 111 133 147 182
1440p QHD 132 155 155 193
1080p Full HD 149 158 162 198

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 158
1920x1080 Low 198
1920x1080 Medium 162
1920x1080 Ultra 149
2560x1440 High 155
2560x1440 Low 193
2560x1440 Medium 155
2560x1440 Ultra 132
3840x2160 High 133
3840x2160 Low 182
3840x2160 Medium 147
3840x2160 Ultra 111

Performance Analysis: Overpower on Your System

Measured FPS Breakdown

The recorded data for Overpower with the Intel Core i5-11400F and NVIDIA GeForce RTX 5090 shows a system that is overwhelmingly capable of pushing high frame rates across all tested configurations. The measurements cover three resolutions (1920x1080, 2560x1440, and 3840x2160) and four settings presets (Low, Medium, High, Ultra), with the average FPS recorded for each combination. Minimum and maximum FPS values were not captured in the database, so the analysis relies on average frame rates.

At 1920x1080, the lowest preset delivers an average of 197.7 FPS. Moving up to Medium drops the average to 161.5 FPS, which is still exceptionally smooth. High settings produce 158.4 FPS, and Ultra settings land at 148.5 FPS. The spread from Low to Ultra is 49.2 FPS, indicating that the GPU has ample headroom even at the most demanding preset for this resolution. The difference between Medium and High is only 3.1 FPS, while the jump from High to Ultra is 9.9 FPS, showing that the latter preset carries a slightly heavier load.

At 2560x1440, the pattern remains consistent but with slightly lower absolute numbers. Low settings average 192.9 FPS, Medium averages 155.4 FPS, High averages 154.6 FPS, and Ultra averages 132.2 FPS. The gap between Medium and High here is just 0.8 FPS, which is within measurement noise. The drop from High to Ultra is 22.4 FPS, a more pronounced penalty than at 1080p. Low to Ultra spans 60.7 FPS, confirming that the higher resolution amplifies the cost of the Ultra preset.

At 3840x2160, the system still maintains triple-digit averages across the board. Low settings produce 182.2 FPS, Medium produces 147 FPS, High produces 133.3 FPS, and Ultra produces 111.2 FPS. The scaling from 1440p to 4K is notable: Low loses 10.7 FPS, Medium loses 8.4 FPS, High loses 21.3 FPS, and Ultra loses 21 FPS. This suggests that the RTX 5090 is still the dominant factor, but the CPU begins to assert its influence at the lower settings where frame rates are extremely high.

Across all resolutions, the ordering of presets is predictable: Low is always fastest, followed by Medium, then High, then Ultra. The sole exception is at 2560x1440, where Medium (155.4 FPS) edges out High (154.6 FPS) by a negligible margin. The overall takeaway is that this combination never drops below 111 FPS in any recorded configuration, which is far above the 60 FPS playability threshold.

Best Settings per Resolution

The database records all four settings presets as playable at every resolution, meaning each configuration stays at or above 60 FPS. The verdict by resolution identifies the best setting as the most demanding preset that maintains playability, which in all cases is Ultra.

At 1920x1080, Ultra settings run at an average of 148.5 FPS. This is the highest quality preset available, and it still delivers nearly two and a half times the playability threshold. There is no reason to compromise on visual quality at this resolution.

At 2560x1440, Ultra settings average 132.2 FPS. The penalty for moving from 1080p Ultra to 1440p Ultra is 16.3 FPS, but the result remains comfortably above 120 FPS, which is relevant for high refresh rate displays.

At 3840x2160, Ultra settings average 111.2 FPS. This is the lowest average recorded in the entire dataset, yet it still exceeds the 60 FPS threshold by 51.2 FPS. For 4K gaming, this is an excellent result, and the Ultra preset is fully viable.

The database does not list any scenario where the 60 FPS threshold is threatened. Even the most demanding combination, 4K Ultra, maintains a substantial margin. For users with 144 Hz or 165 Hz monitors, dropping to High at 4K (133.3 FPS) or Medium at 4K (147 FPS) would provide a closer match to the display's refresh rate, but the data supports Ultra as the best settings choice at every resolution.

How This Combo Ranks

The Intel Core i5-11400F and NVIDIA GeForce RTX 5090 combination holds a rank of 287 out of 3713 tested combos in Overpower. This places it in the top 7.7 percent of all configurations in the database, which is a strong showing for a pairing that pairs a mid-range 2021 CPU with a flagship 2025 GPU.

The percentile data reinforces this position. The CPU is rated at the 71st percentile against all CPUs, and the GPU is at the 92nd percentile against all GPUs. The GPU is clearly the stronger component in this pairing, and the rank reflects the GPU's dominance. The top 287 ranking means there are 286 other combinations that outperform this setup in Overpower, but those are likely to feature newer high-end CPUs such as the Core i9 or Ryzen 9 series.

Given that the rank is computed across 3713 combos, being at 287 indicates that this setup is near the top tier but not at the absolute pinnacle. The CPU's position at the 71st percentile suggests that it is the limiting factor when paired with the RTX 5090, particularly in scenarios where frame rates are extremely high and CPU overhead becomes relevant. The recorded FPS data supports this interpretation, as the differences between resolutions and presets show the expected GPU-bound behavior at higher settings, but the CPU's influence becomes apparent at low settings where the GPU is less stressed.

Similar Performance Alternatives

The nearest rivals for the CPU provide context for how the i5-11400F compares to other processors. The AMD EPYC 7H12 has an average benchmark score of 17120, which is 0.3 percent lower than the i5-11400F's average of 17177. The Intel Core i5-12450H scores 17239, which is 0.4 percent higher. The AMD Ryzen 3 PRO 8300G scores 17278, which is 0.6 percent higher. The Intel Core Ultra 7 164U scores 17074, which is 0.6 percent lower. These deltas are all within a narrow band, meaning that swapping the i5-11400F for any of these CPUs would result in nearly identical performance in Overpower, assuming the GPU remains the same.

For the GPU, the nearest rivals are the NVIDIA Tesla P100 PCIe 16 GB with an average score of 79605 (0.3 percent lower than the RTX 5090's 79842), the NVIDIA Tesla P100 PCIe 12 GB at 79396 (0.6 percent lower), the AMD Radeon RX 6850M XT at 78940 (1.1 percent lower), and the AMD Radeon Pro Vega 64X at 80959 (1.4 percent higher). These are all older or workstation-oriented parts, which is notable because the RTX 5090's benchmark score is so high that its nearest rivals are not consumer gaming GPUs. In practice, a gamer would not choose a Tesla P100 or a Radeon Pro Vega 64X for Overpower, but the data shows that their raw compute performance is similar to the RTX 5090.

If a user were to pair the i5-11400F with one of these rival GPUs, the FPS in Overpower would be very close. The largest delta among the GPU rivals is 1.4 percent, which translates to a difference of roughly 1.5 to 2.5 FPS at the measured averages. This is imperceptible in real-world gameplay.

CPU and GPU Roles

The measured FPS data across resolutions and presets reveals the division of labor between the CPU and GPU. At higher settings and resolutions, the GPU is the clear bottleneck. For example, at 4K Ultra, the system produces 111.2 FPS, which is the lowest recorded value. At 4K Low, it produces 182.2 FPS, showing that reducing the preset frees up GPU resources and yields a 71 FPS improvement. This pattern indicates that the GPU is heavily utilized at 4K, and the CPU is not the limiting factor.

At 1080p, the situation changes. The difference between Low (197.7 FPS) and Ultra (148.5 FPS) is 49.2 FPS, which is smaller than the 71 FPS gap at 4K. This suggests that at 1080p Low, the CPU is starting to cap the frame rate. The i5-11400F has a passmark single-thread score of 2981 and a passmark multithread score of 16908, which are respectable but not top-tier. When the GPU can produce nearly 200 FPS, the CPU's per-core performance becomes the constraint.

The scaling between resolutions at the same preset further clarifies this. At Low settings, moving from 1080p to 1440p costs only 4.8 FPS (197.7 to 192.9), and moving to 4K costs 15.5 FPS (192.9 to 182.2). This shallow scaling curve indicates that at Low settings, the CPU is the primary limiter even at 4K. At Ultra settings, moving from 1080p to 1440p costs 16.3 FPS (148.5 to 132.2), and moving to 4K costs 21 FPS (132.2 to 111.2). This steeper curve shows that the GPU becomes more influential at Ultra.

The verdict is clear: for this pairing, the GPU dominates at Ultra and High presets across all resolutions, while the CPU becomes the limiting factor at Low and Medium presets, especially at 1080p and 1440p. The i5-11400F is a 6-core, 12-thread processor with a boost clock of 4.40 GHz, and its 3DMark single-thread score of 868 and Cinebench R23 single-core score of 2024 are adequate for 60-100 FPS gaming, but they are not sufficient to fully feed the RTX 5090 at frame rates above 150 FPS.

FAQ

Q: Can this combo run Overpower at 4K Ultra settings?

A: Yes. The recorded average FPS at 3840x2160 Ultra is 111.2 FPS, which is well above the 60 FPS playability threshold. The database lists Ultra as the best settings for 4K, and all presets are marked as playable.

Q: What is the highest FPS this combo can achieve in Overpower?

A: The highest recorded average is 197.7 FPS at 1920x1080 with Low settings. At 2560x1440 Low, the average is 192.9 FPS, and at 3840x2160 Low, it is 182.2 FPS.

Q: How does this combo rank compared to other tested configurations?

A: The combo ranks 287th out of 3713 tested combos in Overpower, placing it in the top 8 percent of all configurations. The GPU is at the 92nd percentile against all GPUs, while the CPU is at the 71st percentile against all CPUs.

Q: Is the CPU or GPU the bigger factor in this game?

A: At Ultra and High presets, the GPU is the dominant factor, as shown by the larger FPS drops when increasing resolution. At Low and Medium presets, the CPU becomes the limiting factor, particularly at 1080p where the GPU is capable of nearly 200 FPS.

Q: What settings should I use for a 144 Hz monitor at 1440p?

A: At 2560x1440, Ultra settings average 132.2 FPS, which is close to 144 Hz but not quite there. High settings average 154.6 FPS, which would more consistently hit a 144 Hz refresh rate. Medium settings are nearly identical at 155.4 FPS.

Q: Are there any settings where the combo drops below 60 FPS?

A: No. The lowest recorded average is 111.2 FPS at 3840x2160 Ultra. Every preset at every resolution exceeds the 60 FPS threshold by a substantial margin.