Instant compatibility check with FPS benchmarks and optimization tips
Overpower
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Your GPU supports ray tracing.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 60 | 72 | 77 | 124 |
| 1440p QHD | 70 | 85 | 91 | 146 |
| 1080p Full HD | 79 | 95 | 102 | 164 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Overpower on Your System
Best Settings per Resolution
At 3840x2160, the most demanding preset that stays at or above 60 FPS is Ultra, with an average of 60 FPS. This is exactly at the playable threshold, so while it clears the bar, the margin is slim. High and Medium also remain playable, at 72 FPS and 77 FPS respectively, but Ultra is the highest quality option that still meets the 60 FPS requirement.
At 2560x1440, the best preset is also Ultra, delivering an average of 70 FPS. This provides a 10 FPS cushion over the playable threshold, making it a more comfortable experience than at 4K. The step down to High drops to 85 FPS, but Ultra remains the recommended choice for maximum visual fidelity while staying above 60 FPS.
At 1920x1080, Ultra again is the best setting, with an average of 79 FPS. This is the strongest result of the three resolutions, offering nearly 20 FPS of headroom above the playable floor. The data shows a clear pattern: this combination can run Overpower at the highest preset across all tested resolutions, with performance scaling downward as resolution increases.
CPU and GPU Roles
The recorded measurements reveal how the balance of CPU and GPU workload shifts across resolutions. At 1920x1080, the average FPS ranges from 164 at Low settings to 79 at Ultra. At 2560x1440, the same settings span from 146 to 70. At 3840x2160, the range compresses to 124 at Low and 60 at Ultra. This scaling pattern indicates that the GPU becomes progressively more dominant as resolution rises.
The delta between Low and Ultra at 1080p is 85 FPS (164 minus 79). At 1440p, that delta narrows to 76 FPS (146 minus 70). At 4K, it narrows further to 64 FPS (124 minus 60). This compression suggests that at lower resolutions, the CPU has more influence on frame rates, since the GPU is less saturated and can respond to settings changes more dramatically. As resolution climbs, the GPU workload increases, and the frame rate becomes more tightly bound to graphics processing.
Looking at the CPU and GPU benchmark data, the Intel Core i5-11400F scores 14,340 in Cinebench R23 multi-core and 2,024 in single-core, with a 71st percentile ranking among all CPUs. The NVIDIA GeForce RTX 5060 has a Passmark G3D score of 20,891 and a 72nd percentile among all GPUs. Both components sit in similar percentile ranges, suggesting a balanced pairing. However, the FPS scaling across resolutions points to the GPU as the limiting factor at 4K, where Ultra lands exactly at 60 FPS. At 1080p, the CPU has more headroom to drive higher frame rates, as evidenced by the 164 FPS Low setting result.
Measured FPS Breakdown
1920x1080:
- Low: 164 FPS average
- Medium: 102 FPS average, 87 FPS minimum, 118 FPS maximum
- High: 95 FPS average
- Ultra: 79 FPS average
The minimum and maximum values are only recorded for Medium settings, showing a spread of 31 FPS between the floor and peak. This suggests consistent frame pacing without severe dips.
2560x1440:
- Low: 146 FPS average
- Medium: 91 FPS average, 77 FPS minimum, 105 FPS maximum
- High: 85 FPS average
- Ultra: 70 FPS average
At 1440p, the Medium preset shows a 28 FPS spread (77 to 105). The drop from Low to Medium is 55 FPS, while the drop from High to Ultra is 15 FPS. The settings scaling is not linear; the largest performance hit comes from moving from Low to Medium.
3840x2160:
- Low: 124 FPS average
- Medium: 77 FPS average, 66 FPS minimum, 89 FPS maximum
- High: 72 FPS average
- Ultra: 60 FPS average
At 4K, the Medium preset records a 23 FPS spread (66 to 89). The gap between Low and Medium is 47 FPS, which is the largest single-step drop at this resolution. The gap between High and Ultra is 12 FPS. Every preset at 4K remains above 60 FPS on average, with Ultra being the only one that lands exactly on the threshold.
Across all resolutions, the Medium preset is the only one with recorded minimum and maximum values. This indicates that the database captures frame time variance for this setting, while other presets are summarized by average only. The minimum FPS values at Medium are 87 at 1080p, 77 at 1440p, and 66 at 4K, all of which remain above the playable threshold.
How This Combo Ranks
The combination of the Intel Core i5-11400F and NVIDIA GeForce RTX 5060 ranks 1,643 out of 3,713 tested combos for Overpower. This places it in the 44th percentile of all combinations in the database. The rank reflects the overall capability of this pairing across the game's requirements.
This mid-pack positioning is consistent with the component-level percentiles. The CPU sits at the 71st percentile against all CPUs, and the GPU sits at the 72nd percentile against all GPUs. When combined, the rank drops relative to those individual standings, which suggests that the game's workload does not fully utilize both components in a way that pushes the pairing higher. The 4K Ultra result of exactly 60 FPS indicates a system that is capable but not overprovisioned for the most demanding settings.
The rank of 1,643 means there are 1,642 combinations that perform better and 2,070 that perform worse. This is a solidly mid-tier result. For a game released in 2023 with action genre demands, this pairing delivers playable performance at all resolutions, but it does not dominate the benchmark charts.
Similar Performance Alternatives
Examining the nearest rivals for both components provides context for what other hardware would behave similarly.
CPU rivals: The Intel Core i5-11400F has an average benchmark score of 17,177. The AMD EPYC 7H12 scores 17,120, which is 0.3% lower. The Intel Core i5-12450H scores 17,239, which is 0.4% higher. The AMD Ryzen 3 PRO 8300G scores 17,278, which is 0.6% higher. The Intel Core Ultra 7 164U scores 17,074, which is 0.6% lower. These four CPUs are all within a 1.2% performance band of the i5-11400F, meaning any of them would produce nearly identical frame rates in Overpower, assuming the same GPU.
GPU rivals: The NVIDIA GeForce RTX 5060 has an average benchmark score of 26,331. The AMD Radeon 860M scores 26,401, which is 0.3% higher. The NVIDIA GeForce MX550 scores 26,421, which is 0.3% higher. The AMD Radeon RX 5700 XT 50th Anniversary scores 26,553, which is 0.8% higher. The AMD Radeon RX 6750 XT scores 26,011, which is 1.2% lower. These GPUs are all within a 2% performance band, so swapping the RTX 5060 for any of them would result in very similar FPS measurements in this game.
For a user considering upgrades or alternatives, the data indicates that the i5-11400F and RTX 5060 are closely matched by several other parts. The performance deltas are all under 1.2%, so the gaming experience in Overpower would be effectively indistinguishable among these options.
The Verdict
This PC can run Overpower. The verdict by resolution is unambiguous: all three resolutions list all four settings presets as playable.
At 3840x2160, the best playable setting is Ultra at 60 FPS average. This meets the playable threshold exactly, so it is technically playable but leaves no margin for frame rate drops. Users who prefer a safety buffer could choose High at 72 FPS or Medium at 77 FPS.
At 2560x1440, Ultra delivers 70 FPS average, providing a 10 FPS cushion. This is the recommended resolution for balanced visual quality and performance headroom.
At 1920x1080, Ultra achieves 79 FPS average, giving a 19 FPS buffer. This is the safest option for consistent frame rates, and it also offers the highest average FPS across all settings at this resolution.
The data shows a system that is fully capable of running the game at maximum settings at every resolution tested. The only caution is at 4K Ultra, where the average sits exactly at the 60 FPS threshold. For users who prioritize smoothness over visual fidelity, dropping to High at 4K adds 12 FPS, which is a meaningful improvement. For all other combinations, the performance is comfortably above the playable floor.
FAQ
Q: Can this PC run Overpower at 4K Ultra settings?
A: Yes, the average FPS is 60 at 3840x2160 Ultra, which exactly meets the playable threshold.
Q: What is the best preset at 2560x1440?
A: Ultra is the best preset, with an average of 70 FPS.
Q: How much faster is Low settings compared to Ultra at 1080p?
A: Low averages 164 FPS, while Ultra averages 79 FPS, a difference of 85 FPS.
Q: Is the RTX 5060 significantly faster than the RX 6750 XT in this game?
A: The RTX 5060 scores 26,331 on average, while the RX 6750 XT scores 26,011. The RTX 5060 is 1.2% faster, a negligible difference.
Q: What is the minimum FPS recorded for Medium settings at 1440p?
A: The minimum FPS for Medium at 2560x1440 is 77, which is still above the 60 FPS playable threshold.
Q: How does the i5-11400F compare to the i5-12450H?
A: The i5-11400F averages 17,177, while the i5-12450H averages 17,239. The i5-12450H is 0.4% faster, making the two effectively equivalent for this game.