Instant compatibility check with FPS benchmarks and optimization tips
Overpower
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Your GPU supports ray tracing.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 77 | 92 | 102 | 162 |
| 1440p QHD | 90 | 110 | 117 | 188 |
| 1080p Full HD | 102 | 122 | 135 | 196 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Overpower on Your System
Measured FPS Breakdown
Starting with 4K at 3840x2160, the Intel Core i5-11400F and NVIDIA GeForce RTX 4070 combination delivers an average of 91.6 FPS on High settings. Dropping to Medium settings yields 102.3 FPS, while Low settings push the average to 162.4 FPS. The most demanding preset, Ultra, still maintains a solid 77.2 FPS average. This means even at the highest resolution tested, every preset clears the 60 FPS playability threshold with room to spare.
Moving down to 2560x1440, the frame rates scale upward noticeably. High settings produce 110.4 FPS average, Medium reaches 116.6 FPS, and Low jumps to 187.5 FPS. Ultra settings at 1440p deliver 89.9 FPS average, which is nearly 13 FPS higher than the same preset at 4K. The gap between Medium and High at this resolution is relatively small at 6.2 FPS, suggesting the settings curve flattens in the mid-range.
At 1920x1080, the performance ceiling becomes apparent. Low settings hit 196.4 FPS average, the highest recorded figure across the entire test matrix. Medium settings produce 134.8 FPS, High settings yield 122.4 FPS, and Ultra settings maintain 101.6 FPS. The delta between Medium and High at 1080p is 12.4 FPS, while the delta between High and Ultra is 20.8 FPS, indicating that the Ultra preset imposes a more significant performance cost than the step from Medium to High.
The recorded data does not include minimum or maximum frame times, so the analysis relies on average FPS values. Across all nine resolution and preset combinations, the lowest average is 77.2 FPS (4K Ultra) and the highest is 196.4 FPS (1080p Low). No configuration in the measured set falls below the 60 FPS playability threshold.
CPU and GPU Roles
The scaling pattern across resolutions reveals how the workload shifts between the Intel Core i5-11400F and the NVIDIA GeForce RTX 4070. At 1080p, the CPU has more influence on frame rates because the GPU can render frames quickly enough to expose processor limitations. The jump from Low to Ultra at 1080p costs 94.8 FPS (from 196.4 down to 101.6), which is a 48% reduction. This steep drop suggests that higher presets add geometry, lighting, and shading work that stresses both components, but the CPU must feed the GPU efficiently to sustain those high Low-preset numbers.
At 1440p, the resolution increase shifts more burden onto the GPU. The difference between Low and Ultra is 97.6 FPS (187.5 down to 89.9), a 52% reduction. The fact that this percentage is larger than at 1080p indicates the GPU is becoming the primary bottleneck as pixel count rises. The CPU still matters, but its relative influence diminishes because the GPU takes longer to process each frame.
At 4K, the GPU dominates the performance equation. The spread from Low to Ultra is 85.2 FPS (162.4 down to 77.2), a 52.5% reduction. Interestingly, the absolute delta between Low and Ultra is smaller at 4K than at 1440p, but the percentage reduction is similar. This pattern shows that the RTX 4070 is the limiting factor at 4K, while the i5-11400F has enough headroom to avoid becoming the primary constraint even at lower resolutions.
The data also shows diminishing returns when raising settings. At every resolution, the step from Low to Medium produces a smaller FPS drop than the step from High to Ultra. For example, at 4K, Low to Medium costs 60.1 FPS, while High to Ultra costs 14.4 FPS. This indicates that the Ultra preset includes features that are disproportionately expensive relative to their visual impact, while the jump from Low to Medium is more costly because it enables foundational rendering features.
Similar Performance Alternatives
Looking at the CPU's nearest rivals in the database, the AMD EPYC 7H12 scores 17120 on average, just 0.3% below the i5-11400F's 17177 average benchmark score. A system with this EPYC processor would deliver nearly identical CPU-bound performance. The Intel Core i5-12450H scores 17239, which is 0.4% higher than the i5-11400F, making it effectively a match for gaming workloads that depend on processor throughput. The AMD Ryzen 3 PRO 8300G scores 17278, 0.6% higher, and the Intel Core Ultra 7 164U scores 17074, 0.6% lower. All four rivals sit within a tight 1.2% band, so swapping in any of them would produce indistinguishable frame rates in CPU-limited scenarios.
For the GPU side, the NVIDIA Tesla P4 scores 37628 on average, just 0.1% below the RTX 4070's 37648. The AMD Radeon RX Vega 56 scores 37507, 0.4% lower. The NVIDIA GeForce RTX 4080 Mobile scores 38135, which is 1.3% higher, and the AMD Radeon PRO W6400 scores 37157, 1.3% lower. These deltas are all within 1.3%, meaning the RTX 4070's nearest rivals would produce very similar GPU-bound frame rates in Overpower. A system pairing the i5-11400F with any of these GPU alternatives would land within a few FPS of the measured results.
The 71st percentile ranking for the CPU against all tested processors and the 81st percentile for the GPU against all tested graphics cards confirm that this combo sits above average in both categories. However, the close proximity of the rival scores suggests that the specific choice among these alternatives matters less than the overall platform balance.
The Verdict
Yes, this PC can run Overpower at every resolution and preset tested. The verdict data lists all four settings (Low, Medium, High, Ultra) as playable at each resolution, with the playability threshold set at 60 FPS. At 3840x2160, the best preset that stays at or above 60 FPS is Ultra, running at 77.2 FPS average. At 2560x1440, Ultra also leads with 89.9 FPS average. At 1920x1080, Ultra delivers 101.6 FPS average.
The margin above the 60 FPS threshold is comfortable across the board. The smallest margin is at 4K Ultra, where the average sits 17.2 FPS above the threshold. This means even demanding scenes that cause frame drops are unlikely to push the average below playable levels, though the absence of minimum FPS data prevents a precise worst-case analysis. For users with 4K displays who want maximum visual quality, the 77.2 FPS average provides a smooth experience. For competitive play at high refresh rates, the 1080p Low preset at 196.4 FPS average offers the headroom needed for 144Hz or higher monitors.
FAQ
Q: Can this system handle Overpower at 4K with Ultra settings?
A: Yes. The measured average FPS at 3840x2160 with Ultra settings is 77.2, which clears the 60 FPS playability threshold by 17.2 FPS.
Q: What is the highest average frame rate recorded for this combo?
A: The highest average is 196.4 FPS, achieved at 1920x1080 with Low settings.
Q: How much performance is lost when moving from 1080p to 4K at Ultra settings?
A: At 1080p Ultra, the average is 101.6 FPS. At 4K Ultra, the average is 77.2 FPS. This represents a reduction of 24.4 FPS, or roughly 24% of the 1080p value.
Q: Which component is more likely to limit performance at 1440p?
A: The GPU becomes the primary limiting factor at 1440p. The percentage reduction from Low to Ultra at 1440p (52%) is larger than at 1080p (48%), indicating the RTX 4070 is doing more of the heavy lifting as resolution increases.
Q: Are there any settings that fall below 60 FPS?
A: No. Every resolution and preset combination in the measured data stays above 60 FPS. The lowest recorded average is 77.2 FPS at 4K Ultra.
Q: How does this combo rank among all tested combinations in the database?
A: It ranks 981st out of 3713 tested combos, placing it in the upper portion of the distribution.
Best Settings per Resolution
At 3840x2160, the most demanding preset that stays at or above 60 FPS is Ultra, with an average of 77.2 FPS. This is the maximum quality option available, and it still provides a comfortable margin above the playability threshold.
At 2560x1440, Ultra is again the best choice, delivering 89.9 FPS average. The higher resolution benefits from the same settings ceiling, and the additional 12.7 FPS over 4K Ultra reflects the reduced pixel count.
At 1920x1080, Ultra settings produce 101.6 FPS average, making it the optimal choice for users who prioritize visual quality. For those targeting very high refresh rates, dropping to Low settings at 196.4 FPS average would be the alternative, but the question of "best settings" per the database definition points to Ultra as the most demanding preset that still clears 60 FPS.
Across all three resolutions, the Ultra preset is viable. This consistency indicates that the Intel Core i5-11400F and NVIDIA GeForce RTX 4070 combination has sufficient headroom to run Overpower at maximum quality without sacrificing playability, regardless of the display resolution.
How This Combo Ranks
The combo rank for this pairing is 981 out of 3713 tested combinations. This places it in the 74th percentile of all tested systems, meaning roughly three-quarters of tested combos rank below it. The CPU's 71st percentile ranking and the GPU's 81st percentile ranking both contribute to this overall position.
The rank reflects the balance between the two components. A CPU in the 71st percentile paired with a GPU in the 81st percentile produces a system that outperforms most combinations in the database, but it does not reach the top tier occupied by flagship CPUs paired with flagship GPUs. The 981st rank out of 3713 indicates that while this combo is strong, there are 980 tested combinations that deliver higher frame rates in Overpower.
The proximity of the nearest rival scores for both components suggests that small hardware changes would not dramatically alter this ranking. A swap to the Intel Core i5-12450H or the NVIDIA GeForce RTX 4080 Mobile would shift performance by less than 1.3% on average, which would likely move the combo rank only slightly. The overall position in the database is stable, and the system's ability to run Overpower at Ultra settings across all resolutions is the defining characteristic of this pairing.