Instant compatibility check with FPS benchmarks and optimization tips
Overpower
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Your GPU supports ray tracing.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 55 | 69 | 72 | 117 |
| 1440p QHD | 65 | 77 | 83 | 139 |
| 1080p Full HD | 74 | 86 | 95 | 155 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Overpower on Your System
The Intel Core i5-11400F and NVIDIA GeForce RTX 4060 combination delivers a consistent 60 FPS or higher experience across nearly every setting and resolution tested for Overpower. The only exception is the Ultra preset at 4K, which falls just short of the playability threshold.
Similar Performance Alternatives
The database places the Intel Core i5-11400F at the 71st percentile among all tested CPUs, with an average benchmark score of 17177. Its closest rivals are tightly clustered, which means users upgrading from one of these parts would see almost no difference in CPU-bound scenarios. The AMD EPYC 7H12 scores 17120, a mere 0.3% behind the i5-11400F. The Intel Core i5-12450H is 0.4% ahead with a score of 17239. The AMD Ryzen 3 PRO 8300G leads the group by 0.6% at 17278, while the Intel Core Ultra 7 164U trails by 0.6% at 17074. For gaming performance in Overpower, these four processors are effectively interchangeable with the i5-11400F; none of them would move the frame rate needle in a meaningful way.
On the graphics side, the RTX 4060 holds the 61st percentile among all GPUs, with an average benchmark score of 17639. Its nearest rivals are an unusual mix of legacy and integrated parts. The AMD Radeon HD 7790 scores 17666, which is 0.2% higher. The AMD Radeon 780M integrated graphics score 17588, 0.3% lower. The AMD Radeon Pro 560 sits 0.5% behind at 17551, and the AMD Radeon Pro 460 trails by 0.7% at 17509. The small deltas here indicate that, at least in synthetic benchmarks, the RTX 4060 behaves very similarly to these cards. However, the RTX 4060 brings modern feature support and 8 GB of GDDR6 memory, which the older Radeon parts lack, and that matters for a 2023 action title like Overpower.
CPU and GPU Roles
The recorded FPS data shows how the workload shifts between the CPU and GPU as resolution changes. At 1920x1080, the RTX 4060 has ample headroom, and the i5-11400F becomes the limiting factor. The Low preset reaches 155.2 FPS, while Ultra drops to 74.4 FPS. The spread between presets is large, which indicates the GPU is doing progressively more work as settings increase, but the CPU is still able to feed the card at these frame rates.
Moving to 2560x1440, the frame rates compress slightly. Low runs at 138.5 FPS, Medium at 83 FPS, High at 76.8 FPS, and Ultra at 64.8 FPS. The drop from Low to Medium is substantial, suggesting the GPU is now taking on more rendering load, but the CPU still delivers enough throughput to keep the average above 60 FPS even at Ultra.
At 3840x2160, the GPU is clearly the dominant component. Low hits 116.5 FPS, but Medium drops to 71.5 FPS and High to 68.9 FPS. Ultra falls below the playable threshold at 54.5 FPS. The i5-11400F has no trouble keeping up at 4K; the RTX 4060 simply runs out of pixel-pushing capacity at the highest settings. The scaling pattern across resolutions confirms that this combo is balanced at 1080p and 1440p, but at 4K the GPU dictates the outcome.
Best Settings per Resolution
At 1920x1080, the most demanding preset that stays at or above 60 FPS is Ultra, which averages 74.4 FPS. This is the straightforward recommendation for 1080p gaming. There is no reason to lower settings when the card handles the maximum preset with room to spare.
At 2560x1440, Ultra also remains playable, averaging 64.8 FPS. That is above the 60 FPS threshold, though the margin is thinner than at 1080p. Players who want a buffer against demanding scenes could step down to High at 76.8 FPS, but the data supports Ultra as the best visual setting that maintains playability.
At 3840x2160, the situation changes. Ultra averages 54.5 FPS, which misses the 60 FPS mark. The best playable preset is High, averaging 68.9 FPS. Medium also clears the threshold at 71.5 FPS, but High offers better visual quality while still staying comfortably above 60. For 4K owners, High is the target setting.
The Verdict
The verdict by resolution is clear. At 1920x1080, the combo runs every preset, including Ultra, above 60 FPS, with Ultra averaging 74.4 FPS. At 2560x1440, the same is true: all four presets clear 60 FPS, and Ultra averages 64.8 FPS. At 3840x2160, three of the four presets are playable: Low at 116.5 FPS, Medium at 71.5 FPS, and High at 68.9 FPS. Only Ultra falls short at 54.5 FPS.
This PC can run Overpower at 1080p and 1440p with maximum settings, and it can run the game at 4K with high settings. The single weak point is 4K Ultra, where the RTX 4060 does not have enough performance to hold 60 FPS. For anyone playing at 1440p or below, this is a no-compromise setup. For 4K users, dialing back from Ultra to High restores playability without a dramatic visual penalty.
Measured FPS Breakdown
The measured FPS data covers three resolutions and four settings per resolution, with average FPS recorded for each combination.
At 1920x1080, the Low preset averages 155.2 FPS. Medium averages 95 FPS. High averages 86.4 FPS. Ultra averages 74.4 FPS. The step from Low to Medium is the largest single drop, a 60.2 FPS reduction, which shows the cost of enabling medium-quality effects. The gap between Medium and High is 8.6 FPS, and the gap between High and Ultra is 12 FPS.
At 2560x1440, Low averages 138.5 FPS. Medium averages 83 FPS. High averages 76.8 FPS. Ultra averages 64.8 FPS. The Low-to-Medium drop is 55.5 FPS, again the largest step. Medium to High costs 6.2 FPS, and High to Ultra costs 12 FPS. The overall scaling from 1080p to 1440p reduces frame rates by roughly 11% to 13% across the lower presets, but Ultra only drops from 74.4 FPS to 64.8 FPS, a 12.9% reduction.
At 3840x2160, Low averages 116.5 FPS. Medium averages 71.5 FPS. High averages 68.9 FPS. Ultra averages 54.5 FPS. The Low-to-Medium drop is 45 FPS, which is the most severe single preset change in the entire dataset. Medium to High is a small 2.6 FPS difference. High to Ultra costs 14.4 FPS, pushing the game below the 60 FPS threshold. The 4K results show that the RTX 4060 handles low settings easily, but the transition to medium-quality rendering at 4K is where the GPU starts to strain.
The pattern across all resolutions is consistent: the Low-to-Medium transition is the most expensive, while Medium-to-High is often relatively minor. The High-to-Ultra step varies, with the largest impact at 4K.
How This Combo Ranks
Among the 3713 tested CPU and GPU combinations in the database for Overpower, this pairing ranks 2050th. That places it in the middle of the pack, which aligns with the measured FPS results. The combo is neither a top-tier 4K powerhouse nor a low-end budget setup; it sits in a comfortable mid-range position where 1080p and 1440p gaming are fully covered.
The rank of 2050 out of 3713 means roughly 55% of tested combos perform better. That is not a flattering position, but the practical results tell a better story. The 60 FPS threshold is the relevant metric for playability, and this combo clears it at every resolution except 4K Ultra. Many higher-ranked combos achieve their position through extreme multi-core CPU scores or high-end GPUs that cost considerably more, yet the i5-11400F and RTX 4060 deliver a smooth experience in this specific game across most of the tested configurations.
The CPU's 71st percentile ranking and the GPU's 61st percentile ranking are both solidly above average, but neither component is exceptional on its own. Together, they produce a balanced system that handles Overpower well at mainstream resolutions. The 2050th rank reflects the overall competitive field rather than a weakness in this pairing. For a 6-core, 12-thread processor and an 8 GB mid-range GPU, the combination performs as expected, with the only meaningful limitation being 4K Ultra settings.