Instant compatibility check with FPS benchmarks and optimization tips
Overpower
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Your GPU supports ray tracing.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 62 | 80 | 86 | 134 |
| 1440p QHD | 74 | 89 | 100 | 158 |
| 1080p Full HD | 81 | 102 | 108 | 176 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Overpower on Your System
Can Intel Core i5-11400F + NVIDIA GeForce RTX 3070 run Overpower? The recorded data says yes, and comfortably so. Across every resolution and preset combination tested, this pairing clears the 60 FPS playability threshold, often by a wide margin. The database shows a system that is evenly matched: the CPU and GPU complement each other well, resulting in high average frame rates even at maximum settings. This analysis breaks down the measured FPS, examines the role each component plays, compares nearby alternatives, and provides a clear verdict based strictly on the benchmark results.
Measured FPS Breakdown
The measurements provide a complete picture of performance across three resolutions and four quality presets. The database records no minimum or maximum frame rate values, so this analysis focuses on the average FPS figures.
At 1920x1080, the system delivers its highest performance. With Low settings, the average FPS reaches 175.8. Moving to Medium settings drops the average to 107.9, while High settings produce 101.8 FPS. At Ultra settings, the average is 81.3 FPS. The scaling from Low to Ultra shows a predictable decline, but even the most demanding preset leaves significant headroom above the 60 FPS threshold.
At 2560x1440, performance remains strong. Low settings average 157.9 FPS, Medium settings average 100.1 FPS, and High settings average 89.4 FPS. The Ultra preset averages 73.6 FPS. The resolution increase from 1080p to 1440p costs roughly 10% to 18% performance depending on the preset, with the largest relative drop occurring at Ultra settings.
At 3840x2160, the system still maintains playable frame rates across all settings. Low settings average 134.2 FPS, which is remarkably high for 4K. Medium settings average 85.8 FPS, High settings average 79.8 FPS, and Ultra settings average 61.9 FPS. The Ultra preset at 4K is the only configuration that approaches the 60 FPS threshold, but it still clears it by nearly 2 FPS on average.
The data reveals a consistent pattern: the gap between Low and Medium settings is larger than the gap between Medium and High. For example, at 1080p, moving from Low to Medium costs 67.9 FPS, while moving from Medium to High costs only 6.1 FPS. This suggests that the Medium preset represents a significant jump in visual workload, while High adds comparatively less overhead.
CPU and GPU Roles
The benchmark data indicates that this game scales primarily with resolution and settings, which points to the GPU as the dominant performance factor. As resolution increases from 1080p to 2160p, the average FPS drops across all presets, a classic sign of GPU-bound workload. The CPU, an Intel Core i5-11400F, remains consistent in its output regardless of resolution, so the frame rate differences come from the graphics card.
The Intel Core i5-11400F provides 6 cores and 12 threads, with a base clock of 2.60 GHz and a boost clock of 4.40 GHz. Its benchmark scores are solid for a mid-range desktop processor. The Cinebench R23 multi-core score of 14340 and single-core score of 2024 indicate strong general processing capability. The PassMark single-thread score of 2981 and multithread score of 16908 confirm that this CPU can handle modern game workloads without bottlenecking the RTX 3070.
The NVIDIA GeForce RTX 3070 is the clear performance driver in this pairing. Its 8 GB of GDDR6 memory on a 256-bit bus provides 448.0 GB/s of bandwidth, and its 5888 shading units deliver substantial rasterization throughput. The GPU's PassMark G3D score of 22214 and 3DMark Steel Nomad DX12 score of 3162 reflect its capability in modern game workloads.
The scaling between presets supports this interpretation. At 1080p Low, the system achieves 175.8 FPS, which is likely near the CPU's practical limit for this game. At 4K Ultra, the average drops to 61.9 FPS, showing that the GPU is doing the heavy lifting as pixel count increases. The CPU's role becomes less significant at higher resolutions, where the GPU's fill rate and memory bandwidth determine the final frame rate.
The data also shows that the game is not heavily CPU-threaded, or the CPU is sufficiently strong that it does not become a limiting factor. The i5-11400F's 12 threads and 12 MB of shared L3 cache provide enough headroom for game logic and physics, leaving the GPU to handle the visual workload.
Similar Performance Alternatives
The database lists nearest rivals for both the CPU and GPU, providing context for how this combination compares to other hardware.
For the Intel Core i5-11400F, the nearest rivals are all within a narrow performance band. The AMD EPYC 7H12 scores 17120 on average, which is 0.3% lower than the i5-11400F's 17177. The Intel Core i5-12450H scores 17239, 0.4% higher. The AMD Ryzen 3 PRO 8300G scores 17278, 0.6% higher, and the Intel Core Ultra 7 164U scores 17074, 0.6% lower. These deltas are all under 1%, meaning a system built with any of these CPUs would produce nearly identical frame rates in Overpower. The i5-11400F sits in the middle of this group, offering essentially equivalent CPU performance to its nearest competitors.
For the NVIDIA GeForce RTX 3070, the nearest rivals show slightly larger deltas. The AMD Radeon RX 7600 XT scores 17083, which is 0.7% lower than the RTX 3070's 17208. The NVIDIA GeForce GTX 690 scores 17037, 1% lower. The AMD Radeon HD 7970M scores 17019, 1.1% lower. The NVIDIA Tesla K40c scores 17468, which is 1.5% higher. These are all small margins, but the RTX 3070 holds a consistent edge over three of its four nearest rivals. A system with an RX 7600 XT would deliver frame rates within about 1% of the RTX 3070, making it a viable alternative for this game.
Combining these results, a system with an Intel Core i5-12450H and an AMD Radeon RX 7600 XT would behave almost identically to the tested configuration. The CPU deltas are under 1%, and the GPU delta is 0.7%, so the overall performance difference would be negligible. On the other hand, a pairing with an AMD EPYC 7H12 and a Tesla K40c would be slightly faster on the GPU side but slightly slower on the CPU side, resulting in a similar overall experience.
The Verdict
The verdict is straightforward: this PC can run Overpower at every resolution and preset combination tested. The recorded data shows that all twelve configurations exceed the 60 FPS playability threshold, and the best playable settings are Ultra at every resolution.
At 3840x2160, the best settings are Ultra with an average FPS of 61.9. This is the tightest margin in the entire dataset, but it still clears the threshold. Players who prefer a larger safety margin can drop to High settings for 79.8 FPS or Medium for 85.8 FPS, while Low settings provide 134.2 FPS.
At 2560x1440, the best settings are Ultra with an average FPS of 73.6. This provides 13.6 FPS of headroom above the 60 FPS threshold, which is comfortable for most players. High settings increase the average to 89.4 FPS, Medium to 100.1 FPS, and Low to 157.9 FPS.
At 1920x1080, the best settings are Ultra with an average FPS of 81.3. This gives 21.3 FPS of headroom, making it the most comfortable resolution for maxed-out visuals. High settings average 101.8 FPS, Medium averages 107.9 FPS, and Low averages 175.8 FPS.
For players targeting 60 FPS as the minimum acceptable performance, this system delivers at all settings. For those with high refresh rate monitors, the 1080p and 1440p Low and Medium presets provide frame rates well above 100 FPS, which would suit 120 Hz or 144 Hz displays. At 4K, the Ultra preset is playable but leaves little margin for demanding scenes or future patches.
FAQ
Q: Can this system run Overpower at 4K Ultra settings?
A: Yes. The measured average FPS at 3840x2160 with Ultra settings is 61.9, which exceeds the 60 FPS playability threshold.
Q: What is the best preset to use at 1440p?
A: The best playable settings at 2560x1440 are Ultra, with an average FPS of 73.6. High settings average 89.4 FPS if a higher frame rate is preferred.
Q: How much performance is lost when moving from 1080p to 4K?
A: At Ultra settings, the average FPS drops from 81.3 at 1920x1080 to 61.9 at 3840x2160, a reduction of 19.4 FPS. At Low settings, the drop is from 175.8 to 134.2, a reduction of 41.6 FPS.
Q: Is the CPU or GPU more important for this game?
A: The data indicates the GPU is the primary performance driver. Frame rates scale significantly with resolution and settings, while the CPU's performance remains constant across those changes.
Q: What GPU is closest in performance to the RTX 3070 for this game?
A: The AMD Radeon RX 7600 XT is the nearest rival, with an average benchmark score 0.7% lower than the RTX 3070. Frame rates would be nearly identical.
Q: Does this system ever drop below 60 FPS in the tested configurations?
A: No. The lowest recorded average FPS is 61.9 at 3840x2160 with Ultra settings. Every other configuration averages higher.
How This Combo Ranks
The combination of the Intel Core i5-11400F and NVIDIA GeForce RTX 3070 ranks 1557 out of 3713 tested combos in Overpower. This places the system in the upper portion of the database, roughly in the 58th percentile of all tested combinations. The rank reflects the balanced nature of this pairing: the CPU sits at the 71st percentile among all CPUs, and the GPU sits at the 61st percentile among all GPUs.
The ranking indicates that while this is not a top-tier enthusiast system, it outperforms the majority of tested configurations. The high frame rates at 1080p and 1440p, combined with playable 4K performance, make this a versatile gaming setup. The nearest rival CPUs and GPUs cluster tightly around the same performance level, so the rank is not sensitive to small hardware changes. A system with an i5-12450H and an RX 7600 XT would rank similarly, as would a system with an EPYC 7H12 and a Tesla K40c.
The data shows that this combo is well suited for Overpower. It delivers playable performance at every setting tested, with the only caveat being the narrow 61.9 FPS margin at 4K Ultra. For most players, this system provides a smooth experience at high refresh rates in 1080p and 1440p, and a solid 4K experience with a modest reduction in settings.