Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Overpower
Action 2023

Overpower

48%
Not Recommended Your system may struggle with this game.

Performance

1080p (Full HD)

Low 1080p Measured
118 FPS
Ultra 1080p Measured
60 FPS

1440p (2K / QHD)

Low 1440p Measured
103 FPS
Ultra 1440p Measured
52 FPS

4K (Ultra HD)

Low 4K Measured
89 FPS
Ultra 4K Measured
41 FPS
14.3ms Frame Time
21ms Input Latency
1440p Best Resolution

Requirements Check

Processor
Required 37,513
Your CPU 17,177
Graphics Card
Required 27,382
Your GPU 15,290

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 41 55 55 89
1440p QHD 52 63 65 103
1080p Full HD 60 70 74 118

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 70
1920x1080 Low 118
1920x1080 Medium 74
1920x1080 Ultra 60
2560x1440 High 63
2560x1440 Low 103
2560x1440 Medium 65
2560x1440 Ultra 52
3840x2160 High 55
3840x2160 Low 89
3840x2160 Medium 55
3840x2160 Ultra 41

Performance Analysis: Overpower on Your System

Measured FPS Breakdown

The recorded data for Overpower on the Intel Core i5-11400F with the NVIDIA GeForce RTX 2060 covers three resolutions and four quality presets. All figures are average FPS, as minimum and maximum frame rates were not captured in the measurements.

At 3840x2160, the highest resolution tested, the game is demanding on this combination. The Low preset delivers an average of 88.8 FPS, which is the only playable setting at this resolution. Medium and High both land at exactly 55.1 FPS, a significant drop from Low. Ultra falls further to 40.5 FPS. The jump from Low to Medium represents a 33.7 FPS loss, showing that even the middle preset substantially increases the load at 4K. High matches Medium exactly at 55.1 FPS, which suggests the bottleneck at this resolution shifts between the CPU and GPU in a way that keeps the average identical.

At 2560x1440, the picture improves. Low reaches 102.6 FPS, which is a smooth experience. Medium follows at 65.1 FPS, and High is slightly lower at 63.4 FPS. Ultra drops to 51.7 FPS, which falls short of the 60 FPS threshold. The spread between Low and Medium is 37.5 FPS, while the gap between Medium and High is only 1.7 FPS. This indicates that the High preset is not much more demanding than Medium at this resolution, but Ultra is a different story, with a 13.4 FPS penalty over High.

At 1920x1080, the system shows its strongest performance. Low averages 117.8 FPS, Medium 74 FPS, and High 70.1 FPS. Ultra still clears the playable threshold at 60.1 FPS, though it barely does so. The difference between Low and Medium is 43.8 FPS, which is the largest single-preset gap in the entire dataset. Medium to High costs only 3.9 FPS, and High to Ultra costs 10 FPS. At 1080p, even the most demanding preset stays above 60 FPS, which makes this resolution the most flexible for this hardware.

Best Settings per Resolution

For each resolution, the best settings are defined as the most demanding preset that still maintains an average of at least 60 FPS.

At 3840x2160, the only preset that clears 60 FPS is Low, with an average of 88.8 FPS. Medium and High both fall to 55.1 FPS, and Ultra drops to 40.5 FPS. So the best playable setting at 4K is Low, and it does so with a comfortable margin above the threshold.

At 2560x1440, the best settings are High, which averages 63.4 FPS. This is just above the 60 FPS line, so it is playable but leaves little headroom. Medium runs slightly faster at 65.1 FPS, and Low is much faster at 102.6 FPS, but High is the highest quality preset that remains playable. Ultra at 51.7 FPS is not an option for a steady 60 FPS experience.

At 1920x1080, Ultra is the best playable setting, averaging 60.1 FPS. This is essentially at the threshold, so gameplay will be smooth in most scenes but could dip below 60 during heavy moments. High at 70.1 FPS and Medium at 74 FPS offer more headroom, but Ultra is technically viable.

FAQ

Q: Can this PC run Overpower at 4K?

A: Yes, but only at Low settings. The recorded average at 3840x2160 with Low is 88.8 FPS. Medium and High both drop to 55.1 FPS, and Ultra falls to 40.5 FPS, so those presets are not playable at 4K.

Q: What is the highest quality preset that stays above 60 FPS at 1440p?

A: High is the most demanding preset that clears the threshold, with an average of 63.4 FPS. Medium is slightly faster at 65.1 FPS, and Low is much faster at 102.6 FPS, but Ultra at 51.7 FPS is below the playable line.

Q: Does the RTX 2060 handle Ultra settings at 1080p?

A: Yes, it just barely does. The average FPS at 1920x1080 with Ultra is 60.1, which is only 0.1 FPS above the 60 FPS threshold. For a more comfortable margin, High at 70.1 FPS or Medium at 74 FPS are safer choices.

Q: How much performance is lost when moving from Low to Medium at 1080p?

A: The drop is 43.8 FPS, from 117.8 FPS on Low to 74 FPS on Medium. This is the largest single-preset penalty in the entire dataset, indicating that Medium substantially increases the rendering load.

Q: Is there a big difference between Medium and High at 1440p?

A: No, the difference is small. Medium averages 65.1 FPS and High averages 63.4 FPS, a gap of only 1.7 FPS. The bigger jump is from High to Ultra, which costs 11.7 FPS.

Q: Which resolution gives the most headroom above the 60 FPS target?

A: At 1920x1080 with Low, the average is 117.8 FPS, which is 57.8 FPS above the threshold. At 2560x1440 with Low, the average is 102.6 FPS, which is 42.6 FPS above. At 3840x2160 with Low, the average is 88.8 FPS, which is 28.8 FPS above.

Similar Performance Alternatives

The CPU and GPU each have recorded benchmark scores and nearest rivals that indicate which other hardware would behave similarly in this game.

The Intel Core i5-11400F has an average benchmark score of 17177 and sits in the 71st percentile of all CPUs. Its nearest rivals are closely matched. The AMD EPYC 7H12 scores 17120, which is 0.3% lower, so it would perform nearly identically in CPU-bound scenes. The Intel Core i5-12450H scores 17239, which is 0.4% higher, meaning it would be marginally faster. The AMD Ryzen 3 PRO 8300G scores 17278, 0.6% higher, and the Intel Core Ultra 7 164U scores 17074, 0.6% lower. All four rivals are within a 1.2% band of the i5-11400F, so any of them would deliver essentially the same frame rates in Overpower when paired with the RTX 2060.

The NVIDIA GeForce RTX 2060 has an average benchmark score of 15290 and sits in the 58th percentile of all GPUs. Its nearest rivals include the NVIDIA GeForce GTX 580, which scores 15283 with a delta of 0%, meaning it is effectively identical in raw benchmark terms. The AMD Radeon 680M scores 15270, 0.1% lower, and the NVIDIA GeForce RTX 3050 OEM scores 15199, 0.6% lower. The AMD Radeon RX 7600 scores 15171, 0.8% lower. All of these GPUs fall within a 0.8% range of the RTX 2060, so swapping to any of them would produce nearly the same average FPS in Overpower at the tested settings.

For a builder considering this exact combination, the practical takeaway is that the CPU has more headroom in this game than the GPU. The i5-11400F's rivals are all within a fraction of a percent, and the RTX 2060's rivals are similarly close. The measured frame rates are therefore representative of a broad group of mid-range hardware from the same era.

CPU and GPU Roles

The measured FPS data across resolutions and presets reveals which component is more important for Overpower. The pattern is clear: at higher resolutions, the GPU becomes the limiting factor, while at lower resolutions the CPU still has enough headroom to keep up.

At 3840x2160, the GPU is clearly the bottleneck. Low averages 88.8 FPS, but Medium and High both drop to 55.1 FPS. This is an unusual result, as Medium and High produce identical averages. The likely explanation is that at 4K, the rendering load is so heavy that the GPU is saturated, and the additional work from High over Medium does not change the average because the GPU is already at its limit. Ultra drops further to 40.5 FPS, confirming that the RTX 2060 cannot keep pace with the higher preset demands at this resolution. The CPU, with a 71st percentile score and six cores, is not the limiting factor here.

At 2560x1440, the balance shifts. Low runs at 102.6 FPS, which is high enough that the CPU must feed the GPU quickly. Medium drops to 65.1 FPS, and High to 63.4 FPS. The small gap between Medium and High (1.7 FPS) suggests that the GPU is starting to become the constraint, but the CPU is still able to supply frames. Ultra at 51.7 FPS shows a larger penalty, indicating that the GPU is overwhelmed by the combined effect of resolution and preset quality.

At 1920x1080, the CPU's role becomes more visible. Low reaches 117.8 FPS, which is the highest recorded average in the dataset. The CPU, with a boost clock of 4.40 GHz and a Cinebench R23 multicore score of 14340, is capable of driving high frame rates at 1080p. Medium drops to 74 FPS, a 43.8 FPS penalty, which is the largest single-preset drop in the measurements. This suggests that the GPU is now the primary limit, as the CPU has enough performance to maintain high frame rates but the RTX 2060 cannot keep up with the increased preset demands. Ultra at 60.1 FPS is just at the threshold, confirming that the GPU is the limiting factor at 1080p with high presets.

The resolution scaling tells a similar story. At Low settings, the average FPS drops from 117.8 at 1080p to 102.6 at 1440p (a 15.2 FPS loss), and then to 88.8 at 4K (a further 13.8 FPS loss). This scaling shows the GPU's load increasing with resolution. At Ultra settings, the drop from 1080p to 1440p is 8.4 FPS (60.1 to 51.7), and from 1440p to 4K is 11.2 FPS (51.7 to 40.5). The CPU is not the primary constraint in any of these scenarios, because the frame rates scale downward as resolution increases, which is the signature of a GPU-bound workload.

The one exception is the identical 55.1 FPS at Medium and High at 4K. This could indicate a CPU limit at that specific point, but given that Low at 4K reaches 88.8 FPS, the CPU is clearly capable of higher frame rates. The more likely explanation is that the GPU reaches a saturation point at Medium and High at 4K, and the extra work in High does not translate to a measurable FPS difference because the GPU is already fully utilized.

The Verdict

The verdict by resolution is clear from the recorded data.

At 3840x2160, this PC can run Overpower, but only at Low settings. The average FPS at Low is 88.8, which is well above the 60 FPS threshold. Medium and High both average 55.1 FPS, which is below the playable line, and Ultra averages 40.5 FPS. So at 4K, the best playable preset is Low.

At 2560x1440, the system is more capable. High averages 63.4 FPS, which is above the 60 FPS threshold, and Medium at 65.1 FPS is also playable. Low at 102.6 FPS is the fastest option. Ultra at 51.7 FPS is not playable. The best settings at 1440p are High, with a slim margin of 3.4 FPS over the threshold.

At 1920x1080, every preset clears the 60 FPS line. Low averages 117.8 FPS, Medium 74 FPS, High 70.1 FPS, and Ultra 60.1 FPS. Ultra is technically playable, though the margin is only 0.1 FPS. For a more reliable experience, High or Medium would be better choices, but the data confirms that Ultra is within reach.

This PC is a capable match for Overpower at 1080p and 1440p, with the RTX 2060 and i5-11400F working well together. At 4K, users will need to accept Low settings for a smooth experience. The combination ranks 2886th out of 3713 tested configurations in this game, which places it in the lower-middle portion of the field, but the measured results show that it handles the game at mainstream resolutions without major compromises.