Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Overpower
Action 2023

Overpower

61%
Playable Your system meets minimum requirements.

Performance

1080p (Full HD)

Low 1080p Measured
126 FPS
Ultra 1080p Measured
62 FPS

1440p (2K / QHD)

Low 1440p Measured
109 FPS
Ultra 1440p Measured
54 FPS

4K (Ultra HD)

Low 4K Measured
93 FPS
Ultra 4K Measured
45 FPS
14.3ms Frame Time
21ms Input Latency
4K Best Resolution

Requirements Check

Processor
Required 37,513
Your CPU 17,177
Graphics Card
Required 27,382
Your GPU 23,021

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 45 55 58 93
1440p QHD 54 62 71 109
1080p Full HD 62 70 76 126

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 70
1920x1080 Low 126
1920x1080 Medium 76
1920x1080 Ultra 62
2560x1440 High 62
2560x1440 Low 109
2560x1440 Medium 71
2560x1440 Ultra 54
3840x2160 High 55
3840x2160 Low 93
3840x2160 Medium 58
3840x2160 Ultra 45

Performance Analysis: Overpower on Your System

Can Intel Core i5-11400F + Intel Arc B580 run Overpower? The recorded data says yes, but the experience depends entirely on resolution and quality settings. At 1080p, this combination clears the 60 FPS threshold at every preset, while 1440p requires dropping from Ultra to High. At 4K, only Low settings maintain playable framerates. The database shows a 6-core, 12-thread Rocket Lake CPU paired with a Battlemage GPU, and the measured results reveal a system that is consistently capable but increasingly GPU-bound as pixel count rises.

Similar Performance Alternatives

The Intel Core i5-11400F sits in a densely populated performance tier. Its average benchmark score of 17177 places it at the 71st percentile of all CPUs in the database. The nearest rival data shows the AMD EPYC 7H12 scoring 17120, a delta of 0.3% higher, meaning the i5-11400F trails that server chip by a negligible margin. The Intel Core i5-12450H posts 17239, which is 0.4% ahead, while the AMD Ryzen 3 PRO 8300G leads by 0.6% with a score of 17278. The Intel Core Ultra 7 164U lags 0.6% behind at 17074. In practical terms, any of these four alternatives would deliver nearly identical CPU-bound behavior in Overpower; the differences are within measurement noise.

For the GPU, the Intel Arc B580 averages 23021 across all benchmark tests, ranking at the 68th percentile of all GPUs. Its nearest rivals are remarkably close: the AMD Radeon RX 580 2048SP scores 23061, just 0.2% higher, while the NVIDIA GeForce RTX 2080 scores 22895, 0.6% lower. The NVIDIA GeForce RTX 3080 is only 0.7% ahead at 23172, and the NVIDIA P106-100 leads by 1% at 23249. This clustering means that swapping the Arc B580 for any of these four cards would produce almost identical frame rates in Overpower. The Arc B580 effectively performs like a slightly-modulated RTX 2080 or RTX 3080 in this title, which is a useful reference point for expected behavior.

CPU and GPU Roles

The data indicates that Overpower scales more heavily with GPU load than CPU load as resolution increases. At 1080p Low, the combination produces 126.1 FPS average. Moving to 1440p Low drops that to 108.8 FPS, a 13.7% reduction. At 4K Low, the average falls to 93.2 FPS, another 14.3% step down. These consistent reductions across resolutions suggest the GPU is the primary limiter even at Low settings, since CPU demand does not change with resolution while GPU pixel throughput does.

The pattern intensifies at higher presets. At 1080p Ultra, the measured average is 62 FPS. At 1440p Ultra, it drops to 54.3 FPS, a 12.4% decline. At 4K Ultra, the average collapses to 45.4 FPS, a further 16.4% drop. The gap between Low and Ultra at each resolution tells the same story: at 1080p, Ultra costs 50.7% of the Low framerate (126.1 down to 62). At 4K, Ultra costs 51.3% of Low (93.2 down to 45.4). The proportional penalty is nearly identical, which means the GPU is scaling uniformly with both resolution and settings. The CPU's role is to keep feeding the GPU, and with a 71st percentile score, it does so adequately at 1080p, but the bottleneck shifts entirely to the Arc B580 at 4K.

Measured FPS Breakdown

At 1920x1080, the Intel Core i5-11400F and Intel Arc B580 combination delivers its best results. Low settings produce an average of 126.1 FPS, the highest recorded value in the entire dataset. Medium settings drop to 75.7 FPS, High settles at 70.2 FPS, and Ultra maintains 62 FPS. All four presets clear the 60 FPS playable threshold, with Ultra holding just 2 FPS above it. The spread from Low to Ultra is 64.1 FPS, indicating that quality settings have a substantial impact but never push the system below playable levels.

At 2560x1440, the picture becomes more nuanced. Low settings still deliver a strong 108.8 FPS average. Medium reduces to 70.5 FPS, and High comes in at 61.9 FPS, barely above the 60 FPS line. Ultra drops to 54.3 FPS, which falls below the playable threshold. The database verdict marks High as the best playable setting at this resolution, with an average of 61.9 FPS. The drop from Medium to High is 8.6 FPS, while the drop from High to Ultra is 7.6 FPS, showing a consistent degradation as settings increase.

At 3840x2160, only Low settings remain playable. Low produces 93.2 FPS, which is surprisingly strong for 4K. Medium drops to 58 FPS, just under the threshold. High falls to 55.4 FPS, and Ultra bottoms out at 45.4 FPS. The verdict lists Low as the sole playable setting, with a 93.2 FPS average. The gap between Medium and High is only 2.6 FPS, suggesting that Overpower's Medium and High presets impose similar GPU loads at 4K, while Ultra adds significant overhead.

The Verdict

This PC can run Overpower, but the playable envelope is narrower at higher resolutions. At 1920x1080, every preset clears 60 FPS. The best setting is Ultra, which averages 62 FPS, meaning a player can enjoy maximum quality with a small margin above the threshold. At 2560x1440, High is the best playable setting at 61.9 FPS. Low and Medium also clear 60 FPS, with 108.8 and 70.5 averages respectively, but Ultra fails at 54.3 FPS. At 3840x2160, only Low is playable, averaging 93.2 FPS. Medium, High, and Ultra all fall short of 60 FPS, with the latter three ranging from 45.4 to 58 FPS.

The verdict by resolution is clear: 1080p users get full freedom of settings, 1440p users must cap at High, and 4K users must settle for Low. The 93.2 FPS at 4K Low is a strong result, indicating that the Arc B580 has headroom at lower quality levels even at 4K. For players who prioritize framerate over visuals, 4K Low is viable. For those who want Ultra quality, 1080p is the only resolution that delivers.

How This Combo Ranks

In the database of tested combinations for Overpower, this pairing ranks 2838 out of 3713 combos. That places it in the lower half of all tested systems, specifically at the 23.6th percentile (calculated from rank divided by total). This ranking reflects the mid-range nature of both components. The i5-11400F is a 71st percentile CPU and the Arc B580 is a 68th percentile GPU, so their combined standing is lower than either individual percentile might suggest. This indicates that Overpower is demanding enough that the combination's aggregate performance trails many higher-tier pairings.

The rank does not imply failure. The measured FPS data shows playable performance at multiple resolution and settings combinations. The rank simply contextualizes this system against the full field of tested hardware. A rank of 2838 out of 3713 means 875 tested combos perform worse, while 2837 perform better. For a mid-range desktop CPU and a newer budget-to-mid GPU, this position is consistent with expectations. The system outperforms its CPU's 71st percentile standing in some scenarios, particularly at 1080p Low where 126.1 FPS suggests efficient scaling.

FAQ

Q: Can this system run Overpower at 60 FPS?

A: Yes, at 1920x1080 all four presets (Low, Medium, High, Ultra) average above 60 FPS. At 2560x1440, Low, Medium, and High also clear 60 FPS. At 3840x2160, only Low averages above 60 FPS with 93.2 FPS.

Q: What is the best quality setting at 1440p?

A: High is the best playable setting at 2560x1440, averaging 61.9 FPS. Ultra drops to 54.3 FPS, which is below the 60 FPS playable threshold.

Q: How does the Intel Arc B580 compare to nearby GPUs?

A: The Arc B580 averages 23021 in benchmarks. Its nearest rival is the AMD Radeon RX 580 2048SP at 23061 (0.2% higher). The NVIDIA GeForce RTX 2080 scores 22895 (0.6% lower), and the RTX 3080 scores 23172 (0.7% higher).

Q: Is the CPU or GPU the bottleneck in this system?

A: The GPU is the primary limiter at higher resolutions. At 4K, raising settings from Low to Ultra drops the average from 93.2 to 45.4 FPS, while the CPU's load does not change with resolution. The 71st percentile CPU score indicates it feeds the GPU adequately.

Q: What FPS can I expect at 1080p Medium?

A: The measured average is 75.7 FPS. This is 14.4% below the Low setting's 126.1 FPS but still comfortably above the 60 FPS threshold.

Q: Does this combination rank well among tested systems?

A: It ranks 2838 out of 3713 tested combos for Overpower, placing it in the lower half of the field. The CPU and GPU each sit at the 68th-71st percentile individually, but the combined rank reflects the game's overall demands.