Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Overpower
Action 2023

Overpower

69%
Playable Your system meets minimum requirements.

Performance

1080p (Full HD)

Low 1080p Measured
168 FPS
Ultra 1080p Measured
128 FPS

1440p (2K / QHD)

Low 1440p Measured
162 FPS
Ultra 1440p Measured
123 FPS

4K (Ultra HD)

Low 4K Measured
153 FPS
Ultra 4K Measured
112 FPS
7.3ms Frame Time
11ms Input Latency
4K Best Resolution

Requirements Check

Processor
Required 37,513
Your CPU 14,185
Graphics Card
Required 27,382
Your GPU 79,842

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 112 125 128 153
1440p QHD 123 131 135 162
1080p Full HD 128 137 140 168

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 137
1920x1080 Low 168
1920x1080 Medium 140
1920x1080 Ultra 128
2560x1440 High 131
2560x1440 Low 162
2560x1440 Medium 135
2560x1440 Ultra 123
3840x2160 High 125
3840x2160 Low 153
3840x2160 Medium 128
3840x2160 Ultra 112

Performance Analysis: Overpower on Your System

How This Combo Ranks

The Intel Core i5-10400F paired with the NVIDIA GeForce RTX 5090 sits at rank 635 out of 3713 tested combinations in Overpower. That places this pairing in the top 17% of all recorded combos, a strong showing driven almost entirely by the GPU's raw output. The CPU itself lands at the 68th percentile among all processors in the database, while the GPU sits at the 92nd percentile among all graphics cards. The gap between those two percentile positions is the defining feature of this pairing: a mid-tier processor from 2020 harnessed to a flagship-class graphics card from 2025.

What does rank 635 actually mean in practice? Out of every 100 combos tested, roughly 83 fall below this one. The database records a large field of possibilities, and this particular mix of older six-core processor and current-generation GPU finishes comfortably ahead of most. However, it does not crack the top tier. Combos ranked above this one typically feature processors with higher single-thread performance, which matters for maintaining high frame rates in CPU-bound scenes. The RTX 5090 is capable of producing far more frames than the i5-10400F can feed it, and that bottleneck shows up in the measured results.

CPU and GPU Roles

The data reveals a clear division of labor in this combo. At 3840x2160, the GPU is the dominant factor. Moving from Low to Ultra settings at 4K drops the average frame rate from 153 to 112 FPS, a 27% reduction that reflects the graphics card's workload scaling with visual complexity. At 1920x1080, the same settings change produces a smaller absolute drop, from 168 to 128 FPS, which is a 24% reduction. The fact that the 1080p Low result (168 FPS) is only 15 FPS higher than the 4K Low result (153 FPS) is telling. If the GPU were the sole constraint, the 1080p number would be far higher. Instead, the CPU is capping performance at the lower resolution.

The scaling pattern between resolutions confirms this. At Low settings, going from 1080p to 1440p drops the average from 168 to 162 FPS, a 4% decline. Going from 1440p to 4K drops it from 162 to 153 FPS, another 6% decline. That is a shallow curve. At Ultra settings, the same resolution steps produce a steeper decline: 128 to 123 to 112 FPS, which is a 4% drop followed by a 9% drop. Higher settings increase the GPU's per-frame cost, so the resolution sensitivity grows. But even at Ultra, the 1080p result of 128 FPS is not dramatically higher than the 4K result of 112 FPS. A less powerful CPU would show a wider spread.

The practical takeaway: at 1080p and 1440p, the i5-10400F is the limiting factor in this combo. The RTX 5090 has more headroom than the processor can use. At 4K, the balance shifts closer to the GPU, though the CPU still prevents the card from reaching its full potential. This is a classic pairing asymmetry, a very strong GPU with a processor that was mid-range at launch and is now several generations old.

Measured FPS Breakdown

The recorded data covers three resolutions and four settings presets, for a total of 12 measurement points. Every single point clears the 60 FPS playable threshold, and most clear it by a wide margin.

At 1920x1080, the Low preset averages 168 FPS. The Medium preset averages 140 FPS with a recorded minimum of 119 and a maximum of 161. High averages 137 FPS. Ultra averages 128 FPS. The spread from Low to Ultra is 40 FPS, which is modest for this game. The minimum recorded at Medium, 119 FPS, is still nearly double the playable threshold.

At 2560x1440, Low averages 162 FPS. Medium averages 135 FPS, with a minimum of 115 and a maximum of 155. High averages 131 FPS. Ultra averages 123 FPS. The drop from 1080p to 1440p is 6 FPS at Low, 5 FPS at Medium, 6 FPS at High, and 5 FPS at Ultra. That consistency points to the CPU holding frame rates steady across these two resolutions.

At 3840x2160, Low averages 153 FPS. Medium averages 128 FPS, with a minimum of 109 and a maximum of 147. High averages 125 FPS. Ultra averages 112 FPS. The drop from 1440p to 4K is larger: 9 FPS at Low, 7 FPS at Medium, 6 FPS at High, and 11 FPS at Ultra. The 4K Ultra result of 112 FPS is the lowest average in the entire set, but it still sits well above 60 FPS.

The Medium preset is the only one with recorded minimum and maximum values. At 1080p, the minimum is 119 FPS and the maximum is 161 FPS, a range of 42 FPS. At 1440p, the minimum is 115 and the maximum is 155, a range of 40 FPS. At 4K, the minimum is 109 and the maximum is 147, a range of 38 FPS. The frame time variance is consistent across resolutions, which suggests a stable experience rather than one with occasional hitches.

FAQ

Q: Can this combo run Overpower at 4K Ultra settings?

A: Yes. The measured average at 3840x2160 with the Ultra preset is 112 FPS, which is well above the 60 FPS playable threshold. The database lists all four settings presets as playable at 4K.

Q: Which resolution gives the highest frame rate?

A: The highest recorded average is 168 FPS at 1920x1080 with the Low preset. The lowest recorded average is 112 FPS at 3840x2160 with the Ultra preset.

Q: Is the CPU or GPU the limiting factor?

A: At 1080p and 1440p, the CPU appears to be the limiting factor. The frame rate difference between these two resolutions is small, only 4 to 6 FPS depending on the preset. At 4K, the GPU becomes more relevant, as shown by the larger frame rate drop from 1440p to 4K.

Q: How much performance is lost going from Low to Ultra at each resolution?

A: At 1080p, Low averages 168 FPS and Ultra averages 128 FPS, a 40 FPS difference. At 1440p, Low averages 162 FPS and Ultra averages 123 FPS, a 39 FPS difference. At 4K, Low averages 153 FPS and Ultra averages 112 FPS, a 41 FPS difference.

Q: What is the lowest recorded frame rate in the entire data set?

A: The lowest recorded minimum is 109 FPS, which occurs at 3840x2160 with the Medium preset. Even this worst-case value is nearly double the 60 FPS playable threshold.

Q: Does this combo rank high among all tested combinations?

A: It ranks 635 out of 3713 tested combos, placing it in the top 17% of all recorded pairings in the database.

Best Settings per Resolution

At 1920x1080, the best settings that maintain at least 60 FPS are the Ultra preset, which averages 128 FPS. This is the most demanding preset available, so the recommendation is straightforward: run everything at maximum.

At 2560x1440, the same logic applies. The Ultra preset averages 123 FPS, comfortably above the 60 FPS threshold. There is no reason to drop below Ultra at this resolution.

At 3840x2160, the Ultra preset averages 112 FPS, still well above 60 FPS. The recommendation is Ultra at 4K as well. Every single settings preset at every resolution clears the playable threshold, so the only question is whether the user prefers maximum visual quality or maximum frame rate. For those who want the highest possible FPS, the Low preset at 1080p delivers 168 FPS. For those who want the best image quality, the Ultra preset at 4K delivers 112 FPS.

The Verdict

This PC can run Overpower, and it can run it at maximum settings across all tested resolutions. The verdict by resolution confirms this: at 3840x2160, all four presets (High, Low, Medium, Ultra) are listed as playable, with the best settings at Ultra averaging 112 FPS. At 2560x1440, all four presets are playable, with Ultra averaging 123 FPS. At 1920x1080, all four presets are playable, with Ultra averaging 128 FPS.

The 60 FPS playable threshold is cleared by every single measurement point in the data set. The lowest average is 112 FPS at 4K Ultra. The lowest recorded minimum is 109 FPS at 4K Medium. There is no scenario in the data where this combo dips below 60 FPS. The combination is overqualified for this game, particularly at 1080p and 1440p where the processor limits the frame rate to roughly the same level regardless of resolution.

For a user with a 4K display, the RTX 5090 provides enough headroom to run Overpower at Ultra with an average of 112 FPS. For a user with a 1080p or 1440p display, the same settings will run at 128 or 123 FPS respectively. The bottleneck is the CPU, but the bottleneck still lands at frame rates that most games cannot reach. This is a case where the weakest link in the chain is still strong enough for the task.

Similar Performance Alternatives

The CPU's nearest rivals in the database are all within a narrow performance band. The Intel Xeon 6756E scores 0.2% higher than the i5-10400F in average benchmark score. The AMD EPYC 7552 scores 0.5% higher. On the other side, the Intel Core 7 160UL scores 0.3% lower, and the AMD Ryzen 3 7320C scores 0.6% lower. Any of these processors would produce nearly identical results in Overpower when paired with the RTX 5090, since the GPU is the dominant component in this combination.

The GPU's nearest rivals are similarly close. The NVIDIA Tesla P100 PCIe 16 GB scores 0.3% higher in average benchmark score, while the Tesla P100 PCIe 12 GB scores 0.6% higher. The AMD Radeon RX 6850M XT scores 1.1% higher, and the AMD Radeon Pro Vega 64X scores 1.4% lower. These are marginal differences that would not meaningfully change the measured FPS in Overpower. A system with the i5-10400F and any of these GPUs would deliver essentially the same experience: all settings playable, with frame rates well above 60 FPS at every resolution.

The performance picture is consistent across the entire comparison set. The i5-10400F sits in the middle of a tight cluster of processors, and the RTX 5090 sits in a similarly tight cluster of GPUs. Swapping any of these components for a nearest rival would shift the results by less than 2%, which is within the range of run-to-run variation. For anyone building a system with this CPU or GPU, the alternatives listed here would behave almost identically in this game.