Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Overpower
Action 2023

Overpower

54%
Playable Your system meets minimum requirements.

Performance

1080p (Full HD)

Low 1080p Measured
136 FPS
Ultra 1080p Measured
66 FPS

1440p (2K / QHD)

Low 1440p Measured
121 FPS
Ultra 1440p Measured
58 FPS

4K (Ultra HD)

Low 4K Measured
103 FPS
Ultra 4K Measured
50 FPS
12.7ms Frame Time
19ms Input Latency
4K Best Resolution

Requirements Check

Processor
Required 37,513
Your CPU 14,185
Graphics Card
Required 27,382
Your GPU 21,035

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 50 60 65 103
1440p QHD 58 70 76 121
1080p Full HD 66 79 85 136

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 79
1920x1080 Low 136
1920x1080 Medium 85
1920x1080 Ultra 66
2560x1440 High 70
2560x1440 Low 121
2560x1440 Medium 76
2560x1440 Ultra 58
3840x2160 High 60
3840x2160 Low 103
3840x2160 Medium 65
3840x2160 Ultra 50

Performance Analysis: Overpower on Your System

The Intel Core i5-10400F and NVIDIA GeForce RTX 5050 combination delivers playable performance in Overpower across all tested resolutions, though the margin of safety narrows considerably at 4K. The data shows a clear pattern: at 1920x1080, the system can run Ultra settings above 60 FPS, while at 3840x2160, only High settings and below maintain that threshold. The CPU holds its own in this pairing, with the GPU becoming the limiting factor as resolution increases.

FAQ

Q: Can this PC run Overpower at 60 FPS on 1920x1080?

A: Yes. All four tested settings presets (Low, Medium, High, and Ultra) deliver an average FPS above the 60 FPS playable threshold at 1920x1080. The lowest result is Ultra at 66 FPS average, while Low reaches 136 FPS.

Q: What is the best settings preset for 2560x1440?

A: High is the most demanding preset that stays at or above 60 FPS at 2560x1440, producing an average of 70 FPS. Medium runs at 76 FPS average, but Ultra drops to 58 FPS, which is below the playable threshold.

Q: Is the RTX 5050 or the Core i5-10400F more likely to limit performance at 4K?

A: The GPU is the limiting factor at 3840x2160. The frame rate drops from 103 FPS at Low to 50 FPS at Ultra, a steep scaling curve that points to graphics processing load rather than CPU throughput. The CPU's 3DMark multi-threaded score of 4748 remains constant regardless of resolution.

Q: How does the RTX 5050 compare to its nearest rivals in synthetic benchmarks?

A: The RTX 5050 has an average benchmark score of 21035. It sits 1.6% above the AMD Radeon RX 5600 XT (20713), 0.6% below the AMD Radeon RX Vega M GL (21153), and 1% below the AMD Radeon HD 8970M (21237). It also trails the NVIDIA RTX A4000 Mobile by 1.6% (21379).

Q: Which settings are playable at 3840x2160?

A: Low, Medium, and High are all playable at 3840x2160. High produces exactly 60 FPS average, Medium runs at 65 FPS, and Low reaches 103 FPS. Ultra is not playable, with an average of 50 FPS.

Q: What is the CPU's performance percentile compared to all processors?

A: The Intel Core i5-10400F ranks in the 68th percentile against all CPUs in the database. Its average benchmark score is 14185, with its closest rival being the Intel Xeon 6756E at 14163, a 0.2% difference.

CPU and GPU Roles

The division of labor between the Intel Core i5-10400F and the NVIDIA GeForce RTX 5050 shifts with resolution. At 1920x1080, the CPU has more influence relative to the GPU, since the graphics card can produce very high frame rates. At Low settings, the average FPS is 136 at 1080p. At 2560x1440, that same Low preset drops to 121 FPS, and at 3840x2160 it falls to 103 FPS. The GPU load grows consistently as pixel count rises.

The scaling from 1080p to 1440p at Low settings is roughly 11% slower, while the jump from 1440p to 4K at Low is another 15% slower. This gradual decline suggests that neither component is completely overwhelmed at any single step, but the trend is unmistakable. At Ultra settings, the drop is more pronounced: 66 FPS at 1080p, 58 FPS at 1440p, and 50 FPS at 4K. The RTX 5050 has 8 GB of GDDR6 memory on a 128-bit bus with 320.0 GB/s bandwidth, and those specifications become more relevant as resolution and texture detail increase.

The CPU's role is better understood through its synthetic results. The i5-10400F scores 10283 in Cinebench R23 multi-core and 1451 in single-core. Those scores are fixed, but in-game the CPU handles the action genre's simulation and logic. At 1080p Low, where the GPU has the least work, the 136 FPS result shows the CPU can feed the GPU adequately. At 4K Ultra, the GPU is clearly the bottleneck, as the frame rate collapses to 50 FPS. The recorded data indicates that at 4K, the GPU is the deciding factor, while at 1080p, the combination is better balanced.

How This Combo Ranks

In the database of tested combinations for Overpower, this pairing of the Intel Core i5-10400F and NVIDIA GeForce RTX 5050 ranks 2286 out of 3713 total combos. That places it in the lower half of all tested systems, but the percentile context is important. The CPU sits in the 68th percentile against all CPUs, and the GPU sits in the 66th percentile against all GPUs. The combo ranking is lower than either individual component percentile, which suggests that the pairing does not extract the full potential of either part in this specific game.

The CPU's nearest rivals in average benchmark score are the Intel Xeon 6756E at 14163 (0.2% lower), the Intel Core 7 160UL at 14232 (0.3% higher), the AMD EPYC 7552 at 14115 (0.5% lower), and the AMD Ryzen 3 7320C at 14277 (0.6% higher). These deltas are all within 1%, meaning a system with any of those CPUs would likely produce nearly identical frame rates in Overpower.

For the GPU, the nearest rivals cluster around the same average score. The AMD Radeon RX 5600 XT is 1.6% lower, the AMD Radeon RX Vega M GL is 0.6% higher, the AMD Radeon HD 8970M is 1% higher, and the NVIDIA RTX A4000 Mobile is 1.6% higher. The RTX 5050's 21035 average benchmark score is close enough to these rivals that in-game differences would be minor, likely within a few FPS at most settings.

The Verdict

The recorded data answers the question directly: yes, this PC can run Overpower. The verdict by resolution is clear. At 3840x2160, the playable settings are Low, Medium, and High, with High being the best choice at exactly 60 FPS average. At 2560x1440, the playable settings are Low, Medium, and High, with High producing 70 FPS average. At 1920x1080, all four settings are playable, including Ultra at 66 FPS average.

The 4K result is the most fragile. High sits at exactly 60 FPS, leaving no headroom for demanding scenes. Medium has a recorded minimum of 55 FPS, which dips below the 60 FPS threshold even though the average is 65. For a strictly smooth experience at 4K, Low at 103 FPS is the safest option, but High is technically playable by the average FPS metric.

At 1440p and 1080p, the verdict is more comfortable. The 70 FPS average at 1440p High and the 66 FPS average at 1080p Ultra both clear the threshold with some margin. Gamers who prioritize visual quality should target 1080p Ultra for the best balance, while those who want higher resolution should use 1440p High. The 4K Ultra preset is the only configuration in the entire measured set that fails to hit 60 FPS.

Similar Performance Alternatives

The nearest rivals for the CPU and GPU provide a map of hardware that would behave similarly in Overpower. For the processor, the Intel Xeon 6756E, Intel Core 7 160UL, AMD EPYC 7552, and AMD Ryzen 3 7320C all fall within 0.6% of the i5-10400F's average benchmark score. A system built with any of these CPUs paired with the RTX 5050 would produce frame rates nearly indistinguishable from the measured results.

For the graphics card, the AMD Radeon RX Vega M GL, AMD Radeon HD 8970M, AMD Radeon RX 5600 XT, and NVIDIA RTX A4000 Mobile are the closest matches. The RX 5600 XT is the only one of these that scores lower than the RTX 5050, coming in 1.6% below. The others are all slightly higher, with the RTX A4000 Mobile leading at 1.6% above.

These rival GPUs span different architectures and product generations, but the benchmark data groups them tightly. In practice, swapping the RTX 5050 for any of these would shift average FPS by a small margin, likely less than 5% in most scenarios. The same applies to the CPU rivals. The combination's rank of 2286 out of 3713 would barely move with any of these substitutions.

Best Settings per Resolution

At 3840x2160, the most demanding preset that stays at or above 60 FPS is High, with an average of 60 FPS. This is a borderline result, as the average exactly meets the threshold. Medium is also playable at 65 FPS, but it is a lower quality setting. For a more comfortable margin, Low at 103 FPS is the most reliable option, but High is the best visual quality that still qualifies.

At 2560x1440, the best settings preset is High, delivering 70 FPS. This provides a 10 FPS cushion above the 60 FPS threshold. Medium runs at 76 FPS, but High is the more demanding preset and therefore the better choice for image quality. Ultra at 58 FPS is not recommended, as it falls below the playable threshold.

At 1920x1080, the best settings preset is Ultra, with an average of 66 FPS. This is the only resolution where the maximum quality preset is playable. The 66 FPS result gives a modest 6 FPS margin. High runs at 79 FPS and Medium at 85 FPS, but Ultra is the clear winner for visual fidelity while still maintaining playability.

Measured FPS Breakdown

At 3840x2160, the measured results are as follows. Low settings produce an average of 103 FPS. Medium settings produce an average of 65 FPS, with a minimum of 55 and a maximum of 74. High settings produce an average of 60 FPS. Ultra settings produce an average of 50 FPS. The minimum and maximum values for Low, High, and Ultra are not recorded, but the Medium data shows a spread of 19 FPS between the minimum and maximum.

At 2560x1440, the results step up. Low settings reach 121 FPS average. Medium settings reach 76 FPS average, with a minimum of 64 and a maximum of 87. High settings reach 70 FPS average. Ultra settings drop to 58 FPS average. The Medium spread here is 23 FPS, slightly wider than at 4K.

At 1920x1080, the results are the strongest. Low settings hit 136 FPS average. Medium settings hit 85 FPS average, with a minimum of 72 and a maximum of 98. High settings hit 79 FPS average. Ultra settings hit 66 FPS average. The Medium spread is 26 FPS, the widest of any resolution, which is typical at lower resolutions where CPU and GPU variance have more relative impact.

The pattern across all resolutions is consistent: Low is always the fastest, Ultra is always the slowest, and the gap between them widens at higher resolutions. At 1080p, the gap from Low to Ultra is 70 FPS. At 1440p, it is 63 FPS. At 4K, it is 53 FPS. This narrowing gap at higher resolutions further confirms that the GPU becomes the dominant constraint as pixel count rises.