Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Overpower
Action 2023

Overpower

69%
Playable Your system meets minimum requirements.

Performance

1080p (Full HD)

Low 1080p Measured
170 FPS
Ultra 1080p Measured
130 FPS

1440p (2K / QHD)

Low 1440p Measured
163 FPS
Ultra 1440p Measured
123 FPS

4K (Ultra HD)

Low 4K Measured
154 FPS
Ultra 4K Measured
110 FPS
7.3ms Frame Time
11ms Input Latency
4K Best Resolution

Requirements Check

Processor
Required 37,513
Your CPU 14,185
Graphics Card
Required 27,382
Your GPU 60,347

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 110 124 131 154
1440p QHD 123 133 137 163
1080p Full HD 130 137 140 170

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 137
1920x1080 Low 170
1920x1080 Medium 140
1920x1080 Ultra 130
2560x1440 High 133
2560x1440 Low 163
2560x1440 Medium 137
2560x1440 Ultra 123
3840x2160 High 124
3840x2160 Low 154
3840x2160 Medium 131
3840x2160 Ultra 110

Performance Analysis: Overpower on Your System

# Measured FPS Breakdown

The recorded data for the Intel Core i5-10400F paired with the NVIDIA GeForce RTX 4090 in Overpower shows strong performance across all tested configurations. The game runs well above the 60 FPS playability threshold in every scenario, with the lowest average recorded at 109.6 FPS. This means the combination never dips into uncomfortable territory, even at maximum settings and 4K resolution.

Starting with 3840x2160, the average frame rates are 109.6 FPS at Ultra, 123.5 FPS at High, 130.7 FPS at Medium, and 153.8 FPS at Low. The gap between Low and Ultra is 44.2 FPS, which indicates that the visual settings have a meaningful impact on performance at this resolution. The scaling is not perfectly linear: moving from Low to Medium costs 23.1 FPS, from Medium to High costs 7.2 FPS, and from High to Ultra costs 13.9 FPS. This suggests that the Medium to High step is relatively inexpensive, while the Low to Medium step is the most demanding relative gain.

At 2560x1440, the averages are 123.1 FPS at Ultra, 132.7 FPS at High, 136.5 FPS at Medium, and 163.2 FPS at Low. The difference between Low and Ultra here is 40.1 FPS. The step from High to Ultra is only 9.6 FPS, which is modest, while the jump from Medium to High is 3.8 FPS, and from Low to Medium is 26.7 FPS. Interestingly, the Low to Medium transition costs more at 1440p than at 4K, which may reflect how the CPU and GPU interact at different render loads.

For 1920x1080, the averages are 129.5 FPS at Ultra, 136.9 FPS at High, 139.7 FPS at Medium, and 169.9 FPS at Low. The Low to Ultra spread is 40.4 FPS. The step from Medium to High is just 2.8 FPS, making it nearly free in performance terms. High to Ultra costs 7.4 FPS, and Low to Medium costs 30.2 FPS. This pattern mirrors the other resolutions: the biggest performance hit comes when moving from Low to Medium, while the upper tiers are comparatively gentle.

Across all resolutions, the min and max FPS values were not recorded in the database, so the analysis relies on average frame rates. The data shows consistent behavior: the RTX 4090 delivers high frame rates at every setting, and the CPU appears capable of feeding the GPU adequately at 1080p and 1440p. At 4K, the GPU becomes the primary driver, and the frame rates remain well above 100 FPS even at Ultra.

# Similar Performance Alternatives

Looking at the nearest rivals in the database, the CPU and GPU each have close performance neighbors. For the Intel Core i5-10400F, the average benchmark score is 14185. Its closest competitors are the Intel Xeon 6756E with an average score of 14163 (0.2% higher), the Intel Core 7 160UL at 14232 (0.3% lower), the AMD EPYC 7552 at 14115 (0.5% higher), and the AMD Ryzen 3 7320C at 14277 (0.6% lower). These deltas are all within a single percentage point, so any of these CPUs would produce nearly identical frame rates in Overpower when paired with the same GPU. The practical takeaway is that the i5-10400F sits in a performance band where small differences in synthetic benchmarks do not translate into visible FPS changes in this game.

For the NVIDIA GeForce RTX 4090, the average benchmark score is 60347. Its nearest rivals include the Intel Arc Pro A60 at 60326 (0% difference), the AMD Radeon Pro Vega 48 at 60140 (0.3% higher), the AMD Radeon Pro W6600M at 61896 (2.5% lower), and the AMD Radeon PRO V710 at 58657 (2.9% higher). The Arc Pro A60 and Radeon Pro Vega 48 are essentially identical in average score, so they would deliver nearly the same performance in Overpower. The W6600M is slightly faster on average, while the V710 is a bit slower, but the differences are small enough that real-world FPS would be very close.

What this means for a builder is that the i5-10400F plus RTX 4090 combination is not unique in its performance class. Swapping the CPU for any of the four listed rivals would not change the playable experience meaningfully. Similarly, swapping the GPU for the Arc Pro A60 or the Radeon Pro Vega 48 would produce almost identical frame rates. The W6600M might give a few extra FPS in theory, and the V710 might cost a few, but the measured averages would likely stay within the same range across all tested settings.

The data also shows that the RTX 4090 has a percentile rank of 88 among all GPUs, while the i5-10400F has a percentile rank of 68 among all CPUs. This means the GPU is far more capable relative to its peers than the CPU is relative to its own peers. In Overpower, this imbalance matters because the game appears to be GPU-bound at higher resolutions, but the CPU still needs to keep up at lower settings.

# Best Settings per Resolution

The database records the most demanding preset that stays at or above 60 FPS at each resolution. For all three tested resolutions, that preset is Ultra. The average FPS at Ultra is 109.6 at 3840x2160, 123.1 at 2560x1440, and 129.5 at 1920x1080. Since the playability threshold is 60 FPS, and the lowest average (109.6 at 4K Ultra) is well above that threshold, every setting from Low through Ultra is playable at every resolution.

If a user wants the best visual quality without sacrificing smoothness, Ultra is the clear choice at all resolutions. The margin is comfortable: at 4K, there is 49.6 FPS of headroom above the threshold; at 1440p, there is 63.1 FPS; and at 1080p, there is 69.5 FPS. These margins mean that even if there are occasional frame drops in busy scenes, the average would have to fall by a large amount before hitting 60 FPS.

For users with high refresh rate displays, the choice depends on the resolution. At 1080p, even Ultra settings exceed 120 FPS, so a 144 Hz monitor would be well served. At 1440p, Ultra also stays above 120 FPS, making it suitable for high refresh gaming. At 4K, Ultra averages 109.6 FPS, which is above 100 FPS but below 120 FPS, so a 120 Hz 4K display would not be fully saturated. Dropping to High at 4K raises the average to 123.5 FPS, which would satisfy a 120 Hz display.

The data suggests that the most demanding preset, Ultra, is always the best choice unless a specific frame rate target above 60 FPS is required. For a 144 Hz 4K display, the user would need to drop to Medium (130.7 FPS) or Low (153.8 FPS) to get closer to 144 FPS, but the measured averages show that even Medium at 4K exceeds 130 FPS.

# FAQ

Q: Can this combination run Overpower at 4K Ultra?

A: Yes. The measured average FPS at 3840x2160 with Ultra settings is 109.6 FPS, which is well above the 60 FPS playability threshold.

Q: What is the best setting for 1440p?

A: Ultra is the best setting because it delivers an average of 123.1 FPS at 2560x1440. All other settings also exceed 60 FPS, but Ultra offers the highest visual quality.

Q: How much performance is lost when moving from Low to Ultra at 1080p?

A: At 1920x1080, the average FPS at Low is 169.9, and at Ultra it is 129.5. The difference is 40.4 FPS, or roughly 24% of the Low value.

Q: Is the RTX 4090 overkill for this game?

A: The data shows that the RTX 4090 produces frame rates from 109.6 to 169.9 FPS across all tested settings and resolutions. Since even the lowest average is far above 60 FPS, the GPU has substantial headroom, but it does not bottleneck the experience.

Q: Does the i5-10400F limit the RTX 4090 in this game?

A: The recorded scores show the CPU is in the 68th percentile among all CPUs, while the GPU is in the 88th percentile. At 1080p and 1440p, the frame rates are high, suggesting the CPU can keep up. At 4K, the GPU becomes the primary factor, and the CPU is less likely to be a limitation.

Q: Are there other GPUs that perform similarly to the RTX 4090 in this game?

A: Based on average benchmark scores, the Intel Arc Pro A60 (60326) and AMD Radeon Pro Vega 48 (60140) are within 0.3% of the RTX 4090's 60347 score. The AMD Radeon Pro W6600M is 2.5% lower, and the AMD Radeon PRO V710 is 2.9% higher.

# CPU and GPU Roles

The data shows a clear pattern in how the CPU and GPU contribute to Overpower's performance across resolutions. At 1920x1080, the average FPS ranges from 129.5 at Ultra to 169.9 at Low. At 2560x1440, the range is 123.1 to 163.2. At 3840x2160, the range is 109.6 to 153.8. The spread between Low and Ultra narrows slightly as resolution increases: 40.4 FPS at 1080p, 40.1 FPS at 1440p, and 44.2 FPS at 4K. This similarity suggests that the GPU is the dominant factor at all resolutions, because the cost of higher settings is roughly consistent regardless of pixel count.

However, the resolution scaling tells a more nuanced story. Comparing Low settings, the average FPS drops from 169.9 at 1080p to 163.2 at 1440p (a 6.7 FPS loss) and then to 153.8 at 4K (a 9.4 FPS loss from 1440p). For Ultra settings, the drop from 1080p to 1440p is 6.4 FPS (129.5 to 123.1), and from 1440p to 4K it is 13.5 FPS (123.1 to 109.6). The larger drop from 1440p to 4K at Ultra settings indicates that the GPU is working harder at the highest visual quality and resolution, while the CPU's role becomes relatively smaller.

At 1080p, the frame rates are high enough that the CPU could be a limiting factor in some scenes, but the recorded averages do not show a bottleneck. The i5-10400F has a passmark single-thread score of 2541 and a multithread score of 12115, which are modest by modern standards, yet the game still reaches 169.9 FPS at Low settings. This suggests that Overpower is not heavily CPU-threaded, or that the CPU is sufficient for the game's demands.

At 4K, the GPU is clearly the primary driver. The RTX 4090 has a passmark G3D score of 38194 and a GPU compute score of 26613, and the measured FPS at 4K Ultra is 109.6. The fact that 4K Ultra is only 20.1 FPS slower than 1080p Ultra (129.5 to 109.6) indicates that the GPU has enough headroom to handle the increased pixel count without collapsing. The CPU's influence is less pronounced because the GPU is doing most of the heavy lifting.

The scaling between presets also highlights the GPU's role. At 1080p, moving from Low to Medium costs 30.2 FPS, which is the largest single-step drop. At 1440p, the same step costs 26.7 FPS, and at 4K it costs 23.1 FPS. This pattern suggests that the GPU is more sensitive to settings changes at lower resolutions, where the CPU is less likely to be a bottleneck. At higher resolutions, the GPU is already under load, so the relative cost of increasing settings is smaller.

Overall, the data indicates that the RTX 4090 is the dominant component in this pairing for Overpower. The CPU provides adequate support at all resolutions, but it does not appear to be the limiting factor. The frame rates are consistently high across the board, and the performance scales predictably with resolution and settings.

# How This Combo Ranks

In the database, this combination of the Intel Core i5-10400F and NVIDIA GeForce RTX 4090 ranks 631st out of 3713 tested combos for Overpower. This places it in the top 17% of all combinations in the database. The rank reflects the overall performance across the game's tested settings, and given that the average FPS never drops below 109.6, the high rank is expected.

The percentile ranks of the individual components provide context. The CPU is in the 68th percentile among all CPUs, and the GPU is in the 88th percentile among all GPUs. The combined rank of 631 out of 3713 suggests that the GPU's strong performance lifts the combo higher than the CPU's percentile alone would imply. The GPU is the higher-performing component, and it carries the combo to a better overall position.

Compared to other combos in the database, this pairing is well above the median. The rank of 631 means that 3082 combos are slower, and only 630 are faster. The fact that the RTX 4090 has an average benchmark score of 60347, which is near the top of the GPU distribution, supports this result. Even with a mid-range CPU like the i5-10400F, the GPU's capability ensures that the combo ranks high in a GPU-intensive game like Overpower.

The data also shows that the CPU's nearest rivals are all within 0.6% of its average score, which means that swapping in any of those CPUs would not significantly change the combo's rank. Similarly, the GPU's nearest rivals are within 2.9% of its average score, so the rank would shift only slightly with a different GPU in the same performance class. The overall ranking is robust to small changes in component selection.

For a builder considering this combo, the rank indicates that it is a strong performer for Overpower, but not the absolute best in the database. The top 630 combos likely include faster CPUs paired with the same or similar GPUs, which could push frame rates even higher in CPU-bound scenarios. However, the measured averages show that the i5-10400F does not hold the RTX 4090 back in a meaningful way, and the combo remains highly playable at all settings and resolutions.