Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Overpower
Action 2023

Overpower

48%
Not Recommended Your system may struggle with this game.

Performance

1080p (Full HD)

Low 1080p Measured
153 FPS
Ultra 1080p Measured
74 FPS

1440p (2K / QHD)

Low 1440p Measured
137 FPS
Ultra 1440p Measured
66 FPS

4K (Ultra HD)

Low 4K Measured
116 FPS
Ultra 4K Measured
56 FPS
11.2ms Frame Time
17ms Input Latency
4K Best Resolution

Requirements Check

Processor
Required 37,513
Your CPU 14,185
Graphics Card
Required 27,382
Your GPU 17,639

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 56 67 73 116
1440p QHD 66 79 85 137
1080p Full HD 74 89 96 153

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 89
1920x1080 Low 153
1920x1080 Medium 96
1920x1080 Ultra 74
2560x1440 High 79
2560x1440 Low 137
2560x1440 Medium 85
2560x1440 Ultra 66
3840x2160 High 67
3840x2160 Low 116
3840x2160 Medium 73
3840x2160 Ultra 56

Performance Analysis: Overpower on Your System

Measured FPS Breakdown

The recorded data for Overpower with the Intel Core i5-10400F and NVIDIA GeForce RTX 4060 shows a clear pattern of performance that scales predictably with resolution and settings. At 1920x1080, the lowest settings produce an average of 153 FPS, which is the highest frame rate recorded for this combination across all tested configurations. Moving up to Medium settings at this resolution, the average drops to 96 FPS, with a minimum of 81 FPS and a maximum of 110 FPS. High settings at 1920x1080 yield an average of 89 FPS, while Ultra settings bring the average down to 74 FPS. The data shows that even at the most demanding preset for this resolution, the average remains comfortably above the 60 FPS playable threshold.

At 2560x1440, the performance scales down in a predictable manner. Low settings produce an average of 137 FPS, which remains exceptionally high. Medium settings reduce the average to 85 FPS, with a recorded minimum of 73 FPS and a maximum of 98 FPS. High settings at this resolution deliver 79 FPS on average, and Ultra settings still manage to hold at 66 FPS. The minimum frame rate for Medium at this resolution, 73 FPS, indicates that even during demanding scenes, the system does not dip below the playable threshold. Ultra at 2560x1440, while the lowest average among the presets here, still clears the 60 FPS mark by a measurable margin.

Moving to 3840x2160, the highest resolution tested, the results show a more pronounced impact from the settings menu. Low settings produce an average of 116 FPS, which is a substantial figure for 4K gaming. Medium settings reduce the average to 73 FPS, with a minimum of 62 FPS and a maximum of 84 FPS. High settings follow closely with an average of 67 FPS. Ultra settings at this resolution are the only configuration that falls below the 60 FPS playable threshold, with an average of 56 FPS. The minimum frame rate of 62 FPS at Medium settings suggests that the system can maintain a steady experience in most scenarios, though the Ultra preset clearly exceeds the capabilities of this hardware at 4K.

CPU and GPU Roles

The benchmark results indicate that the RTX 4060 plays the dominant role in shaping frame rates as resolution increases. The scaling from 1920x1080 to 2560x1440 shows an average reduction in FPS across all presets, which is typical for a GPU-bound workload. For instance, at High settings, the average drops from 89 FPS at 1080p to 79 FPS at 1440p, a reduction of approximately 11 percent. At Ultra settings, the drop is from 74 FPS to 66 FPS, which is around 11 percent as well. This consistent scaling suggests that the GPU is the limiting factor at these resolutions, as the CPU has sufficient headroom to keep up with the increased pixel count.

The transition from 2560x1440 to 3840x2160 further emphasizes the GPU's role. At High settings, the average falls from 79 FPS to 67 FPS, a reduction of about 15 percent. At Medium settings, the average drops from 85 FPS to 73 FPS, which is a 14 percent decrease. The Ultra preset at 4K, with an average of 56 FPS, is the only configuration that fails to meet the 60 FPS threshold, reinforcing that the RTX 4060 is the primary constraint at this resolution. The CPU, with its 6 cores and 12 threads, does not appear to bottleneck the system in this title, as the frame rate differences between presets are consistent with GPU-bound scaling.

The settings presets themselves also reveal the GPU's influence. At 1920x1080, the difference between Low and Ultra is 79 FPS, from 153 FPS down to 74 FPS. This wide gap indicates that the GPU is heavily utilized across the entire settings range. At 3840x2160, the gap between Low and Ultra is 60 FPS, from 116 FPS down to 56 FPS. The data shows that the RTX 4060 is the component that determines whether the system can maintain playable frame rates, particularly at higher resolutions. The Core i5-10400F, while not the fastest processor in the database, provides enough computational power to avoid becoming the primary bottleneck in this title.

Similar Performance Alternatives

The nearest rivals for the Intel Core i5-10400F, based on average benchmark scores, include the Intel Xeon 6756E, the Intel Core 7 160UL, the AMD EPYC 7552, and the AMD Ryzen 3 7320C. The Xeon 6756E scores 0.2 percent lower than the i5-10400F, with an average score of 14163 compared to 14185. The Core 7 160UL scores 0.3 percent higher, at 14232. The EPYC 7552 is 0.5 percent lower, at 14115, and the Ryzen 3 7320C is 0.6 percent higher, at 14277. These deltas are minimal, indicating that any of these processors would deliver nearly identical frame rates in Overpower when paired with the same GPU. The differences are well within the margin of error for real-world gaming performance.

For the GPU, the nearest rivals to the RTX 4060 include the AMD Radeon HD 7790, the AMD Radeon 780M, the AMD Radeon Pro 560, and the AMD Radeon Pro 460. The HD 7790 scores 0.2 percent higher than the RTX 4060, with an average score of 17666 versus 17639. The Radeon 780M is 0.3 percent lower, at 17588. The Radeon Pro 560 is 0.5 percent lower, at 17551, and the Radeon Pro 460 is 0.7 percent lower, at 17509. These small percentage differences suggest that, in terms of raw benchmark scores, these GPUs would produce very similar performance in Overpower. However, the RTX 4060 offers features like ray tracing cores and DLSS support, which are not reflected in these average scores but could affect real-world settings in other titles. For this specific game, the data shows that these alternatives would likely land within a few FPS of the RTX 4060 at any given resolution and preset.

The Verdict

Based on the verdictByResolution data, the Intel Core i5-10400F and NVIDIA GeForce RTX 4060 combination can run Overpower at all three tested resolutions, with one notable exception. At 1920x1080, all four presets are playable, including Ultra, which averages 74 FPS. The best settings at this resolution are Ultra, and the average FPS at those settings is 74, which clears the 60 FPS threshold by 14 frames. At 2560x1440, all four presets are also playable, with Ultra averaging 66 FPS. The best settings at 1440p are Ultra as well, and the average FPS is 66, which is 6 frames above the playable threshold.

At 3840x2160, the situation is slightly more nuanced. Three of the four presets are playable: High, Low, and Medium. High averages 67 FPS, Low averages 116 FPS, and Medium averages 73 FPS, with a minimum of 62 FPS that still stays above the 60 FPS mark. Ultra, however, averages 56 FPS, which falls below the playable threshold. The best settings at 4K are High, with an average FPS of 67. This means that the system can deliver a smooth experience at 4K as long as the user avoids the Ultra preset. The data shows that this combination is capable of running Overpower at high frame rates across most configurations, with the only exception being 4K Ultra, which requires a more powerful GPU to maintain 60 FPS.

FAQ

Q: Can this PC run Overpower at 1920x1080 with Ultra settings?

A: Yes. The average FPS at 1080p Ultra is 74, which is above the 60 FPS playable threshold. All other presets at this resolution also exceed 60 FPS.

Q: What is the highest resolution at which Ultra settings remain playable?

A: The highest resolution with playable Ultra settings is 2560x1440, where the average FPS is 66. At 3840x2160, Ultra drops to 56 FPS on average, which is below the playable threshold.

Q: Are there any settings at 3840x2160 that fail to reach 60 FPS?

A: Yes. The Ultra preset at 4K averages 56 FPS, which is the only configuration across all tested resolutions and presets that falls below the 60 FPS threshold.

Q: How does the frame rate drop when moving from 1080p to 1440p at High settings?

A: The average FPS drops from 89 at 1080p High to 79 at 1440p High, a reduction of 10 frames per second. The system remains well above the playable threshold in both cases.

Q: What is the minimum frame rate recorded for this combination?

A: The lowest minimum FPS recorded is 62, which occurs at 3840x2160 with Medium settings. This is still above the 60 FPS playable threshold.

Q: Which component is more important for performance at 4K?

A: The GPU is the primary limiting factor at 4K. The RTX 4060 determines whether the frame rate stays above 60 FPS, as evidenced by the Ultra preset averaging 56 FPS at this resolution.

Best Settings per Resolution

At 1920x1080, the most demanding preset that stays at or above 60 FPS is Ultra, with an average FPS of 74. This is the highest quality setting available and still provides a comfortable margin above the playable threshold. At 2560x1440, the most demanding preset that stays at or above 60 FPS is also Ultra, with an average FPS of 66. The margin is smaller than at 1080p, but it remains playable. At 3840x2160, the most demanding preset that stays at or above 60 FPS is High, with an average FPS of 67. The Ultra preset at this resolution averages 56 FPS and is therefore not recommended for a smooth experience. These settings represent the optimal balance between visual quality and performance based on the recorded data.

How This Combo Ranks

The combination of the Intel Core i5-10400F and NVIDIA GeForce RTX 4060 ranks 2005 out of 3713 tested combos in Overpower. This places it in the lower half of the database, but the ranking should be interpreted in context. The combo achieves playable frame rates at the vast majority of tested configurations, including 4K High settings. The rank reflects the overall performance relative to other hardware pairings, many of which include more powerful CPUs and GPUs. The RTX 4060, with a percentile of 61 among all GPUs, and the Core i5-10400F, with a percentile of 68 among all CPUs, both sit in the upper half of their respective categories. The combo rank of 2005 out of 3713 indicates that while this system is not at the top of the performance curve, it delivers solid results for the hardware involved. The data shows that the primary weakness is the 4K Ultra preset, which is the only configuration that fails to meet the 60 FPS threshold. For users targeting 1080p or 1440p, this combination performs admirably, with headroom at Ultra settings at both resolutions.