Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Overpower
Action 2023

Overpower

48%
Not Recommended Your system may struggle with this game.

Performance

1080p (Full HD)

Low 1080p Measured
166 FPS
Ultra 1080p Measured
87 FPS

1440p (2K / QHD)

Low 1440p Measured
155 FPS
Ultra 1440p Measured
76 FPS

4K (Ultra HD)

Low 4K Measured
132 FPS
Ultra 4K Measured
63 FPS
9.7ms Frame Time
15ms Input Latency
1440p Best Resolution

Requirements Check

Processor
Required 37,513
Your CPU 14,185
Graphics Card
Required 27,382
Your GPU 17,208

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 63 77 81 132
1440p QHD 76 91 97 155
1080p Full HD 87 103 111 166

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 103
1920x1080 Low 166
1920x1080 Medium 111
1920x1080 Ultra 87
2560x1440 High 91
2560x1440 Low 155
2560x1440 Medium 97
2560x1440 Ultra 76
3840x2160 High 77
3840x2160 Low 132
3840x2160 Medium 81
3840x2160 Ultra 63

Performance Analysis: Overpower on Your System

The Intel Core i5-10400F paired with the NVIDIA GeForce RTX 3070 is a mid-range desktop combination built around hardware from the same era: a six-core, twelve-thread Comet Lake processor on Intel Socket 1200 and an Ampere-based GA104 graphics card. Overpower, an Action title released in August 2023, was put through the database's measured testing across three resolutions and four presets, and the recorded results show this pairing clearing the 60 FPS playable threshold in every single configuration tested. The data shows a combination that is GPU-limited at higher resolutions but comfortably capable everywhere, with average framerates ranging from 63.4 FPS at 4K Ultra up to 165.9 FPS at 1080p Low.

Measured FPS Breakdown

All numbers below are measured average framerates recorded by the database. Frame-time minimums and maximums were not captured for these runs, so the analysis rests on averages, which is sufficient here given the margins involved.

At 1920x1080, the results scale cleanly with the preset:

  • Low: 165.9 FPS
  • Medium: 111.2 FPS
  • High: 102.9 FPS
  • Ultra: 86.6 FPS

Even at the Ultra preset, the average sits more than 26 frames above the 60 FPS threshold. Dropping from Low to Ultra costs roughly 79 frames at this resolution, a wide spread that indicates the presets carry substantial visual weight.

At 2560x1440, the numbers compress downward:

  • Low: 154.6 FPS
  • Medium: 96.8 FPS
  • High: 91.3 FPS
  • Ultra: 75.8 FPS

The Medium-to-High gap narrows to just 5.5 frames at 1440p, compared to 8.3 frames at 1080p, while the Ultra preset still clears 60 FPS with a margin of almost 16 frames.

At 3840x2160, the most demanding scenario:

  • Low: 132.3 FPS
  • Medium: 80.5 FPS
  • High: 77.1 FPS
  • Ultra: 63.4 FPS

The 4K results are the tightest of the set. Ultra averages 63.4 FPS, which clears the threshold but with only a 3.4-frame cushion. Medium and High land at 80.5 and 77.1 FPS respectively, and even Low holds above 132 FPS, meaning players at 4K can pick almost any preset and stay playable, though Ultra leaves the least headroom for demanding scenes.

CPU and GPU Roles

The scaling pattern between resolutions identifies the limiting component at each step. Moving from 1080p to 1440p at Ultra drops the average from 86.6 to 75.8 FPS, a decline of about 12 percent for a 78 percent increase in pixel count. From 1440p to 4K, the average falls further from 75.8 to 63.4 FPS. This shallow framerate decline relative to the sharp jump in rendered pixels is the classic signature of GPU-bound behavior: the RTX 3070 is the component doing the heavy lifting at 1440p and 4K, and the i5-10400F is not the constraint.

At 1080p the picture shifts somewhat. Low-settings framerates at 1080p (165.9 FPS) versus 1440p (154.6 FPS) differ by only 11.3 frames, a small change for such a large resolution difference, which suggests the CPU begins to bound the ceiling at high framerates. The i5-10400F sits at the 68th percentile of all CPUs in the database, with a single-thread score of 1451 in Cinebench R23 and a multi-thread score of 10283, plus a Geekbench single-core result of 1420 and multi-core result of 6257. Those are solid mid-range figures, and for a game like Overpower they are clearly sufficient: no configuration tested dips below 60 FPS, and the highest recorded average is 165.9 FPS.

Within each resolution, the preset scaling is also informative. The Low-to-Medium gap is the largest single jump at every resolution: 54.7 frames at 1080p, 57.8 frames at 1440p, and 51.8 frames at 4K. The High-to-Ultra gap is comparatively modest, roughly 16 to 17 frames at 1080p and 1440p, shrinking to about 14 frames at 4K. In practice, Medium is where most of the visual cost lands, and pushing from High to Ultra buys the top-tier look for a comparatively small framerate penalty.

The RTX 3070 itself ranks in the 61st percentile of all GPUs in the database, with a PassMark G3D score of 22214, a Geekbench OpenCL score of 112821, and a Vulkan score of 21022. Its 8 GB of GDDR6 on a 256-bit bus provides 448.0 GB/s of bandwidth, and the card delivers 20.31 TFLOPS of FP32 compute across 5888 shading units. Those figures line up with what the measured data shows: strong through 1440p and still viable at 4K with care.

How This Combo Ranks

Against the full field of tested combinations for Overpower, this pairing ranks 1583rd out of 3713 combos. That places it near the middle of the distribution, slightly below the median. Considering that the pairing clears 60 FPS in all twelve tested configurations, including 4K Ultra, the ranking indicates a deeply playable game with a wide range of configurations tested: the database includes many faster setups, but this combo sits comfortably in the playable mainstream of the results table.

The component-level rankings reinforce this mid-pack placement. The i5-10400F's average benchmark score of 14185 places it at the 68th percentile among CPUs, while the RTX 3070's average score of 17208 puts it at the 61st percentile among GPUs. Both components are above the midpoint of their respective fields, with the GPU modestly closer to the middle.

Similar Performance Alternatives

For the CPU, the database's rival list shows several parts with nearly identical aggregate scores. The Intel Xeon 6756E averages 14163, just 0.2 percent below the i5-10400F. The Intel Core 7 160UL averages 14232, 0.3 percent above. The AMD EPYC 7552 averages 14115, 0.5 percent below, and the AMD Ryzen 3 7320C averages 14277, 0.6 percent above. All four sit within a fraction of a percent of the i5-10400F's overall score, so any of them should deliver effectively the same CPU-side behavior in Overpower, a game where the processor is not the limiting factor above 1080p anyway.

For the GPU, the closest rival is the AMD Radeon RX 7600 XT with an average score of 17083, 0.7 percent behind the RTX 3070. The NVIDIA GeForce GTX 690 averages 17037, 1 percent behind, and the AMD Radeon HD 7970M averages 17019, 1.1 percent behind. On the faster side, the NVIDIA Tesla K40c averages 17468, 1.5 percent ahead. Given how tightly these aggregate scores cluster, the RX 7600 XT in particular would be expected to produce nearly indistinguishable framerates in Overpower, while the GTX 690 and HD 7970M, despite their age, land in the same performance band on paper. The practical takeaway: the RTX 3070's measured results here translate well to any GPU in this cluster.

Best Settings per Resolution

Using the database's 60 FPS playable threshold, the most demanding preset that holds at or above the line at each resolution:

  • 1920x1080: Ultra, 86.6 FPS average. There is no need to compromise at 1080p; the top preset clears the threshold with a margin of 26.6 frames.
  • 2560x1440: Ultra, 75.8 FPS average. The maximum preset remains the best choice at 1440p, with 15.8 frames of headroom.
  • 3840x2160: Ultra, 63.4 FPS average. Even at 4K the answer is Ultra, though the cushion shrinks to 3.4 frames. Players who want a larger safety margin at 4K can step down to High at 77.1 FPS or Medium at 80.5 FPS.

In short, Ultra is playable at every tested resolution, which is an uncommonly clean result for a mid-range pairing.

FAQ

Q: Can the i5-10400F + RTX 3070 run Overpower at 4K?

A: Yes. At 3840x2160 the measured averages are 63.4 FPS on Ultra, 77.1 on High, 80.5 on Medium, and 132.3 on Low. Every preset clears the 60 FPS threshold.

Q: Is the CPU or the GPU the bottleneck in this game?

A: The data points to the GPU at 1440p and 4K: framerates fall only modestly as resolution rises sharply, indicating a GPU-bound scenario. At 1080p, the small framerate difference between Low at 1080p (165.9 FPS) and Low at 1440p (154.6 FPS) suggests the CPU caps the high-framerate ceiling.

Q: What is the fastest measured framerate for this combo in Overpower?

A: 165.9 FPS, recorded at 1920x1080 on the Low preset.

Q: How does the RTX 3070 compare to similar GPUs?

A: Its average benchmark score of 17208 places it in the 61st percentile of GPUs. The Radeon RX 7600 XT is 0.7 percent behind, the GTX 690 is 1 percent behind, and the Tesla K40c is 1.5 percent ahead.

Q: Where does this combo rank among tested configurations for Overpower?

A: It ranks 1583rd out of 3713 tested combos, near the middle of the field, while remaining playable in all twelve measured configurations.

Q: Does the preset choice matter much at 4K?

A: Yes. At 3840x2160 the spread runs from 63.4 FPS on Ultra to 132.3 FPS on Low. The biggest single jump is between Low and Medium, 51.8 frames, so Medium is where most of the visual cost is paid.

The Verdict

Yes, this PC can run Overpower, and it can do so at maximum settings across the board. The verdict data confirms playable results at every resolution and every preset: 1080p Ultra averages 86.6 FPS, 1440p Ultra averages 75.8 FPS, and 4K Ultra averages 63.4 FPS, each above the 60 FPS threshold. The i5-10400F provides adequate processing headroom for an Action title that leans on the GPU at higher resolutions, and the RTX 3070, sitting in the 61st GPU percentile, carries the workload from 1080p through 4K. The one caveat is 4K Ultra, where the 3.4-frame margin is thin; High at 77.1 FPS is the safer choice there for consistent play. Everywhere else, this combination delivers a comfortable experience with no settings trade-offs required.