Overpower

The Intel Core i3-12100F paired with the NVIDIA GeForce RTX 5080 delivers exceptionally high frame rates in Overpower, with all four tested presets at every resolution clearing the 60 FPS playability threshold by a wide margin. The benchmark data indicates that the RTX 5080's raw graphics horsepower dominates the game's rendering demands, while the quad-core i3-12100F provides sufficient instruction throughput to avoid becoming a primary bottleneck at standard gaming resolutions. The measured results show a system that is not merely playable but overwhelmingly capable, with average frame rates ranging from a low of 102 FPS at 4K Ultra to a high of 228 FPS at 1080p Low.

Best Settings per Resolution

At 3840x2160, the most demanding preset that maintains an average of at least 60 FPS is Ultra, which achieves an average of 102 FPS. This is the highest quality setting available in the benchmark data, and it still delivers a substantial margin above the 60 FPS playable threshold. The fact that Ultra is the recommended setting at 4K indicates that the RTX 5080 has considerable headroom even when rendering at the highest resolution and quality level.

For 2560x1440, the Ultra preset again qualifies as the best setting, producing an average of 120 FPS. The 1440p Ultra result sits comfortably above the 60 FPS floor, with the average exceeding the threshold by exactly double. This consistency between 4K and 1440p suggests that the GPU is the primary driver of performance at these resolutions, as the frame rate scales in a predictable manner with the pixel count reduction.

At 1920x1080, the Ultra preset delivers an average of 135 FPS, making it the recommended setting at this resolution. The 1080p Ultra frame rate is the lowest of the three Ultra results, which is counterintuitive given the lower resolution, but this pattern points to the CPU becoming more relevant as resolution decreases. Even so, 135 FPS at 1080p Ultra is far beyond the playability threshold, and the data shows no reason to compromise on visual quality at any resolution.

FAQ

Q: Can this PC run Overpower at 4K Ultra settings?

A: Yes, the benchmark data shows an average of 102 FPS at 3840x2160 with Ultra settings, which is well above the 60 FPS playable threshold.

Q: What is the highest average frame rate recorded for this combo?

A: The maximum average FPS in the measured data is 228, achieved at 1920x1080 with Low settings.

Q: Does the performance gap between Low and Ultra settings remain consistent across resolutions?

A: No, the data shows a narrowing gap as resolution decreases. At 4K, the difference between Low (207 FPS) and Ultra (102 FPS) is 105 FPS, while at 1080p the difference is 93 FPS (228 FPS vs 135 FPS).

Q: Which resolution shows the smallest difference between Medium and High settings?

A: At 3840x2160, Medium averages 133 FPS and High averages 123 FPS, a difference of 10 FPS. At 2560x1440, the difference is 11 FPS (156 vs 145), and at 1920x1080 it is 12 FPS (175 vs 163).

Q: Is the 60 FPS threshold ever at risk at any resolution or preset?

A: No. The lowest average FPS recorded across all twelve tested combinations is 102 FPS at 4K Ultra, which is 42 FPS above the threshold.

Q: How does the combo rank among all tested systems for Overpower?

A: This combination ranks 266th out of 3713 tested combos, placing it in the top 7.2% of all systems benchmarked for this game.

Measured FPS Breakdown

At 3840x2160, the RTX 5080 paired with the i3-12100F produces a clear performance hierarchy across the four settings. Low settings yield an average of 207 FPS, which is the fastest 4K result in the dataset. Medium settings drop to an average of 133 FPS, with a minimum of 113 FPS and a maximum of 153 FPS, providing the only min/max data at this resolution. High settings average 123 FPS, while Ultra settings average 102 FPS. The progression from Low to Ultra shows a steady decline of roughly 25-30 FPS per step, with the largest single drop occurring between Low and Medium at 74 FPS.

Moving to 2560x1440, the frame rates increase across the board. Low settings average 219 FPS, a 12 FPS improvement over the 4K Low result. Medium settings average 156 FPS, with a minimum of 133 FPS and a maximum of 180 FPS, representing a 23 FPS gain over the 4K Medium average. High settings average 145 FPS, and Ultra settings average 120 FPS. The scaling from 4K to 1440p is not uniform: the Low preset gains 12 FPS, while the Ultra preset gains 18 FPS, indicating that higher settings benefit slightly more from the reduced resolution.

At 1920x1080, the results show the highest frame rates in the dataset. Low settings average 228 FPS, Medium settings average 175 FPS with a minimum of 149 FPS and a maximum of 202 FPS, High settings average 163 FPS, and Ultra settings average 135 FPS. The 1080p Medium result has the widest recorded min/max spread of 53 FPS, suggesting some frame time variance even at this resolution. The overall pattern across resolutions shows that the GPU remains the dominant performance factor, as the frame rate improvements from 1440p to 1080p are smaller than the improvements from 4K to 1440p.

The Verdict

The benchmark data is unambiguous: this PC can run Overpower with exceptional performance at every resolution and setting combination tested. The verdictByResolution data confirms that all four playable settings — Low, Medium, High, and Ultra — are viable at each of the three resolutions, with the best settings being Ultra at every resolution. The average FPS at the best settings are 102 at 3840x2160, 120 at 2560x1440, and 135 at 1920x1080, all comfortably above the 60 FPS threshold.

The 4K Ultra result of 102 FPS is particularly notable because it demonstrates that even the most demanding configuration in the test suite leaves substantial performance headroom. There is no resolution or preset in the measured data where the system approaches the 60 FPS minimum, making this combo suitable for high-refresh-rate displays at lower resolutions and for smooth 4K gaming at maximum quality. The data indicates that the RTX 5080 is the clear performance driver, with the i3-12100F providing adequate support without dragging down frame rates to a noticeable degree.

Similar Performance Alternatives

Looking at the nearestRivals data for the CPU, the Intel Core i3-12100F has an average benchmark score of 13494, with its closest competitor being the Intel Core 3 N355 at 13492, a delta of 0%. This means the N355 would behave nearly identically in CPU-bound scenarios. The Intel Core i5-9500 scores 13452, putting it 0.3% behind the i3-12100F, while the Intel Core 5 120UL scores 13594, which is 0.7% ahead. The Intel Core i7-1250U trails by 1.1% with a score of 13351. These small deltas indicate that any of these four CPUs would produce statistically similar frame rates in Overpower when paired with the RTX 5080, particularly at higher resolutions where the GPU dominates.

For the GPU, the NVIDIA GeForce RTX 5080 has an average benchmark score of 56083, placing it in the 87th percentile of all GPUs. The nearest rival is the AMD Radeon 8060S with a score of 55757, just 0.6% behind. The AMD Radeon RX 6750 GRE 12 GB scores 55698, a 0.7% deficit, while the AMD Radeon Pro W5700X trails by 2.3% with a score of 54828. On the other side, the AMD Radeon RX 9070 GRE scores 57367, which is 2.2% ahead of the RTX 5080. Swapping the RTX 5080 for any of these GPUs would yield frame rates within a few percentage points of the measured results, assuming the CPU remains the same.

How This Combo Ranks

The combination of the Intel Core i3-12100F and NVIDIA GeForce RTX 5080 ranks 266th out of 3713 tested combos in Overpower, placing it in the top 7.2% of all systems benchmarked for this game. This ranking reflects the dominant GPU performance, as the RTX 5080's 87th percentile GPU score heavily outweighs the CPU's 68th percentile ranking. The rank of 266 suggests that most of the 265 combinations ahead of this one likely feature higher-end CPUs paired with the same or similar GPUs, but the practical impact on frame rates is minimal given the GPU-bound nature of Overpower at the tested settings.

The gap between this combo's rank and its CPU's percentile is instructive. The i3-12100F sits at the 68th percentile of all CPUs, yet the combo still achieves a top-7.2% ranking in this game. This discrepancy confirms that Overpower's performance is overwhelmingly determined by the graphics card, and the CPU's relative weakness does not meaningfully penalize the overall experience. For users considering an upgrade path, the data suggests that the RTX 5080 would continue to deliver strong performance even with a more capable processor, but the current setup already provides frame rates far above the playable threshold.

CPU and GPU Roles

The measured FPS data across resolutions and presets reveals a clear division of labor between the i3-12100F and the RTX 5080 in Overpower. At 3840x2160, the GPU is the primary performance determinant, as the frame rates scale closely with the pixel count and setting complexity. The 4K Ultra result of 102 FPS versus the 4K Low result of 207 FPS shows a 105 FPS swing driven entirely by GPU workload, with the CPU having sufficient headroom to feed the graphics card even at the lowest settings.

As resolution decreases to 2560x1440 and then 1920x1080, the CPU's role becomes more pronounced, though it does not become a limiting factor. The scaling between 4K and 1440p shows an average FPS increase of 12-18 FPS across settings, while the scaling from 1440p to 1080p shows a smaller increase of 9-15 FPS. This diminishing return as resolution drops indicates that the CPU begins to constrain the GPU's potential at 1080p, but the constraint is mild because the i3-12100F's four cores and eight threads still manage to sustain frame rates above 135 FPS at the highest settings.

The setting-to-setting scaling further illustrates this dynamic. At 4K, the drop from Low to Medium is 74 FPS, while at 1080p the same step only costs 53 FPS. This pattern suggests that at lower resolutions, the CPU's ability to issue draw calls becomes a larger share of the total frame time, reducing the GPU's capacity to translate setting changes into frame rate differences. However, the absolute numbers remain so high that the CPU never becomes a genuine bottleneck, and the RTX 5080 continues to deliver playable performance even in the most CPU-intensive scenarios.