Instant compatibility check with FPS benchmarks and optimization tips
Overpower
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 40 | 49 | 52 | 84 |
| 1440p QHD | 47 | 57 | 62 | 98 |
| 1080p Full HD | 53 | 64 | 69 | 110 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Overpower on Your System
The AMD Ryzen 9 9950X3D and Intel Arc B570 combination delivers a nuanced performance profile in Overpower, one defined by a strong CPU paired with a mid-range GPU that becomes the limiting factor as resolution climbs. Measured data shows the pair can handle 1080p and 1440p gaming at smooth framerates, while 4K requires dropping to the Low preset to maintain playability. The following analysis breaks down the benchmark results, component roles, and optimal settings based exclusively on the measured FPS data and hardware specifications provided.
Similar Performance Alternatives
The CPU and GPU in this system each have closely matched rivals based on aggregate benchmark scores. For the AMD Ryzen 9 9950X3D, the nearest performance neighbor is the AMD Ryzen 7 PRO 9755, which scores 75,738 versus 75,779 for the 9950X3D — a delta of just 0.1%. The AMD Ryzen 7 PRO 9755X3D is essentially tied as well at 75,716 (also 0.1% delta), followed by the AMD EPYC 8224P at 75,582 (0.3% slower) and the Intel Core Ultra 9 285 at 75,488 (0.4% slower). In practical terms, any of these four CPUs would deliver nearly identical frame rates in Overpower, since the game’s performance ceiling at higher resolutions is dictated by the GPU rather than the processor.
On the GPU side, the Intel Arc B570’s average benchmark score of 20,556 places it within 0.1% of the NVIDIA GeForce RTX 3070 Mobile (20,534) and the Intel Arc A750 (20,582, which is 0.1% higher than the B570). The AMD Radeon R9 M390X trails by 0.5% (20,662), while the NVIDIA Quadro M4000M is 0.4% ahead (20,480). The Arc A750 being marginally faster than the B570 in synthetic benchmarks is notable, but the measured FPS in Overpower belongs to the B570 specifically. For users considering alternatives, swapping to any of these GPUs would produce broadly similar performance, though the RTX 3070 Mobile and Arc A750 are the closest direct substitutes. The Quadro M4000M and R9 M390X are older designs that happen to land in the same aggregate score range but may differ in driver support and feature set.
FAQ
Q: Can this system run Overpower at 60 FPS on a 4K monitor?
A: At 3840x2160, only the Low preset reaches the 60 FPS threshold, with an average of 84 FPS. Medium averages 52 FPS (with minimums of 44 and maximums of 60), High averages 49 FPS, and Ultra averages 40 FPS. So 4K is playable only on Low settings.
Q: What is the best preset for 1440p gaming with this hardware?
A: At 2560x1440, the Medium preset is the most demanding option that stays at or above 60 FPS, averaging 62 FPS with minimums of 52 and maximums of 71. Low averages 98 FPS, while High (57 FPS) and Ultra (47 FPS) fall below the 60 FPS threshold.
Q: How does the Arc B570 compare to its nearest GPU rival in synthetic tests?
A: The Intel Arc B570 has an average benchmark score of 20,556. The Intel Arc A750 scores 20,582, which is 0.1% higher, making it the closest competitor. The NVIDIA GeForce RTX 3070 Mobile is 0.1% lower at 20,534.
Q: Is the Ryzen 9 9950X3D overkill for this game?
A: The CPU’s average benchmark score of 75,779 places it in the 95th percentile among all CPUs, and its nearest rival (Ryzen 7 PRO 9755) is only 0.1% slower. However, measured FPS at 4K Ultra is just 40 FPS, indicating the GPU is the bottleneck — the CPU’s headroom is not the limiting factor in Overpower.
Q: What framerate can I expect at 1080p with High settings?
A: At 1920x1080 with High settings, the system averages 64 FPS, which clears the 60 FPS playable threshold. Medium averages 69 FPS (59 minimum, 79 maximum), and Low averages 110 FPS. Ultra drops to 53 FPS.
Q: Are the minimum FPS values available for all settings?
A: No. Minimum and maximum FPS were only recorded for Medium settings at each resolution. At 1080p Medium, the range is 59–79 FPS; at 1440p Medium, 52–71 FPS; at 4K Medium, 44–60 FPS. Other presets report only average FPS.
Best Settings per Resolution
For each resolution, the most demanding preset that maintains an average at or above 60 FPS is as follows:
- 1920x1080: High settings, averaging 64 FPS. Medium also clears the threshold at 69 FPS, but High is the highest quality option that remains playable.
- 2560x1440: Medium settings, averaging 62 FPS. Low is also playable at 98 FPS, but Medium provides better visual fidelity while staying above 60.
- 3840x2160: Low settings, averaging 84 FPS. This is the only preset at 4K that reaches the playable threshold; Medium (52 FPS), High (49 FPS), and Ultra (40 FPS) all fall short.
These selections prioritize the highest visual quality without sacrificing the 60 FPS target. The gap between Medium and High at 1440p is narrow (62 vs 57 FPS), but only Medium meets the criterion.
The Verdict
This PC can run Overpower, but the playable settings depend heavily on resolution. The verdict by resolution is clear:
At 1920x1080, the system clears 60 FPS on High, Low, and Medium presets. High is the best choice with an average of 64 FPS. Ultra falls below at 53 FPS.
At 2560x1440, Low and Medium are playable. Medium is the best setting at 62 FPS average, while High (57 FPS) and Ultra (47 FPS) do not meet the threshold.
At 3840x2160, only Low is playable, averaging 84 FPS. Medium (52 FPS), High (49 FPS), and Ultra (40 FPS) all miss the 60 FPS mark.
The overall pattern shows the Arc B570 is the limiting factor: as resolution increases, the CPU’s potential remains untapped while the GPU struggles to maintain framerates. The system is best suited for 1080p or 1440p gaming, with 4K relegated to Low settings for a playable experience.
Measured FPS Breakdown
The measured FPS data provides a complete picture of performance across all resolution and settings combinations:
3840x2160:
- Low: 84 FPS average
- Medium: 52 FPS average, 44 minimum, 60 maximum
- High: 49 FPS average
- Ultra: 40 FPS average
2560x1440:
- Low: 98 FPS average
- Medium: 62 FPS average, 52 minimum, 71 maximum
- High: 57 FPS average
- Ultra: 47 FPS average
1920x1080:
- Low: 110 FPS average
- Medium: 69 FPS average, 59 minimum, 79 maximum
- High: 64 FPS average
- Ultra: 53 FPS average
The data shows consistent scaling: dropping from Ultra to Low roughly doubles the framerate at each resolution. At 1080p, the jump from Ultra (53 FPS) to Low (110 FPS) is a 57 FPS improvement. At 1440p, the same preset change goes from 47 to 98 FPS. At 4K, it goes from 40 to 84 FPS. The Medium preset’s minimum FPS values are worth noting: at 1080p, the minimum of 59 FPS is just below the 60 FPS threshold, though the average of 69 FPS suggests only brief dips.
How This Combo Ranks
Among all tested combinations in the benchmark database, this AMD Ryzen 9 9950X3D + Intel Arc B570 pairing ranks 2,987 out of 3,713 combos for Overpower. This places it in the bottom 20% of tested systems, which aligns with the GPU’s modest performance class. The Arc B570 sits in the 65th percentile among all GPUs, while the CPU is in the 95th percentile — the stark contrast between these positions explains the ranking. The system is effectively a high-end CPU paired with a mid-range GPU, and Overpower’s performance reflects the GPU’s limitations rather than the CPU’s strengths.
The rank of 2,987 suggests that most other tested combinations deliver higher framerates in this game. This is not surprising given that the Arc B570’s aggregate benchmark score (20,556) is comparable to older or mobile GPUs like the RTX 3070 Mobile, rather than current desktop flagship cards. For users prioritizing Overpower performance, the GPU would need to be upgraded to move significantly up this ranking.
CPU and GPU Roles
The division of labor between the Ryzen 9 9950X3D and Arc B570 in Overpower is clear from the scaling data. At 1080p, the CPU has the most influence: the system achieves 110 FPS on Low settings, suggesting the processor can push high framerates when the GPU is not heavily taxed. However, even at this resolution, Ultra settings drop to 53 FPS, indicating the GPU becomes a constraint as graphical load increases.
At 1440p, the GPU’s role grows. Low settings still deliver 98 FPS, but High drops to 57 FPS and Ultra to 47 FPS. The gap between Low and Ultra is 51 FPS, compared to 57 FPS at 1080p — the GPU is starting to dominate the performance curve.
At 4K, the GPU is almost entirely responsible for performance. Low settings produce 84 FPS, but Medium falls to 52 FPS and Ultra to 40 FPS. The narrowing range from Low to Ultra (44 FPS spread) shows the GPU hitting its bandwidth and compute limits. The CPU’s 16 cores and 32 threads, with a boost clock of 5.70 GHz, are simply not exercised at this resolution because the Arc B570 cannot feed frames fast enough.
The resolution scaling tells the story: from 1080p Low to 4K Low, the average FPS drops from 110 to 84 (a 24% reduction), while from 1080p Ultra to 4K Ultra, it drops from 53 to 40 (a 25% reduction). The consistent percentage decline across presets indicates the GPU’s memory bandwidth of 380.0 GB/s and 10 GB of GDDR6 memory are the primary constraints at higher resolutions. The CPU’s 128 MB of L3 cache and 89.6 GB/s memory bandwidth are ample for this game, but they cannot compensate for the GPU’s limitations once resolution scales past 1440p. For optimal performance, users should treat this as a 1080p or 1440p gaming system and reserve 4K for Low settings only.