Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Overpower
Action 2023

Overpower

52%
Playable Your system meets minimum requirements.

Performance

1080p (Full HD)

Low 1080p Measured
72 FPS
Ultra 1080p Measured
35 FPS

1440p (2K / QHD)

Low 1440p Measured
64 FPS
Ultra 1440p Measured
31 FPS

4K (Ultra HD)

Low 4K Measured
54 FPS
Ultra 4K Measured
26 FPS
23.8ms Frame Time
36ms Input Latency
1440p Best Resolution

Requirements Check

Processor
Required 37,513
Your CPU 75,779
Graphics Card
Required 27,382
Your GPU 1,482

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 26 32 34 54
1440p QHD 31 37 40 64
1080p Full HD 35 42 45 72

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 42
1920x1080 Low 72
1920x1080 Medium 45
1920x1080 Ultra 35
2560x1440 High 37
2560x1440 Low 64
2560x1440 Medium 40
2560x1440 Ultra 31
3840x2160 High 32
3840x2160 Low 54
3840x2160 Medium 34
3840x2160 Ultra 26

Performance Analysis: Overpower on Your System

# Measured FPS Breakdown

The recorded data for Overpower on this platform shows a consistent pattern: the AMD Ryzen 9 9950X3D and Intel Arc B390 combination delivers playable frame rates only at the lowest settings, and only at 1080p and 1440p. At 4K, no preset reaches the 60 FPS threshold.

At 3840x2160, the measured averages are as follows. Low settings produce 54 FPS average, which is the highest result at this resolution, but it still falls short of the 60 FPS target. Medium settings drop to 34 FPS average, with a minimum of 29 FPS and a maximum of 39 FPS. High settings yield 32 FPS average, while Ultra settings bring the average down to 26 FPS. The gap between Low and Ultra at 4K is a 28 FPS difference, or roughly 108% higher performance on Low. None of these results are playable per the 60 FPS threshold.

At 2560x1440, the situation improves marginally. Low settings deliver 64 FPS average, crossing the 60 FPS line. Medium settings produce 40 FPS average, with a minimum of 34 FPS and a maximum of 46 FPS. High settings yield 37 FPS average, and Ultra settings pull 31 FPS average. The difference between Low and Ultra here is 33 FPS, meaning Low is more than double the frame rate of Ultra. Only Low clears the playable threshold at this resolution.

At 1920x1080, the same hierarchy holds. Low settings reach 72 FPS average, the highest recorded figure across all resolutions and presets. Medium settings produce 45 FPS average, with a minimum of 38 FPS and a maximum of 52 FPS. High settings yield 42 FPS average, and Ultra settings deliver 35 FPS average. The scaling from 1440p to 1080p at Low settings is a 12.5% improvement (from 64 to 72 FPS), indicating that resolution scaling helps but does not transform the experience.

The recorded data includes min and max frames only for the Medium preset at each resolution. At 4K Medium, the range is 29 to 39 FPS; at 1440p Medium, it is 34 to 46 FPS; at 1080p Medium, it is 38 to 52 FPS. The frame pacing appears tight within those ranges, but the average stays far below the playable target. Across all resolutions, the Low preset consistently outperforms the next-best Medium preset by a wide margin: 59% higher at 4K (54 vs 34), 60% higher at 1440p (64 vs 40), and 60% higher at 1080p (72 vs 45).

# Similar Performance Alternatives

The CPU in this combination ranks in the 95th percentile among all tested processors, with an average benchmark score of 75779. Its nearest rivals in the database are all within a fraction of a percent. The AMD Ryzen 7 PRO 9755 scores 75738, a delta of 0.1% behind. The AMD Ryzen 7 PRO 9755X3D scores 75716, also 0.1% behind. The AMD EPYC 8224P scores 75582, a 0.3% gap. The Intel Core Ultra 9 285 scores 75488, a 0.4% gap. These four alternatives would behave nearly identically to the 9950X3D in CPU-bound scenarios, meaning any differences in game performance would be negligible.

The GPU tells a very different story. The Intel Arc B390 sits in the 9th percentile among all tested graphics cards, with an average benchmark score of 1482 based on the 3DMark Steel Nomad DX12 test. Its nearest rivals are all older, low-end NVIDIA parts. The NVIDIA GeForce GT 520MX scores 1463, a 1.3% gap. The NVIDIA GeForce 800M scores 1460, a 1.5% gap. The NVIDIA GeForce GT 625 OEM scores 1446, a 2.5% gap. The NVIDIA GeForce GT 710 scores 1443, a 2.7% gap. These parts are within a few percent of the Arc B390, so in practical terms, any of these GPUs would produce nearly identical frame rates in Overpower.

The combination of a top-tier CPU with a bottom-tier GPU creates a situation where the GPU is the clear bottleneck. The CPU's nearest rivals would not change the outcome, while the GPU's nearest rivals would maintain the same performance ceiling. For users considering similar hardware, the data suggests that swapping the CPU for any of its four nearest rivals would not alter the FPS results, but swapping the GPU for any of its nearest rivals would also not improve matters. The performance envelope is defined almost entirely by the GPU's low standing.

# Best Settings per Resolution

The playable threshold in the database is 60 FPS. The measured data only includes presets labeled Low, Medium, High, and Ultra, with no custom or mixed settings. At each resolution, the most demanding preset that stays at or above 60 FPS is the best option.

At 3840x2160, no preset reaches 60 FPS. The highest average is 54 FPS on Low settings, which falls 6 FPS short. Medium, High, and Ultra all sit far below the threshold. There is no playable setting at 4K for this configuration.

At 2560x1440, the Low preset achieves 64 FPS average, which clears the threshold by 4 FPS. Medium settings produce 40 FPS, High produces 37 FPS, and Ultra produces 31 FPS. The best playable setting is Low, with an average of 64 FPS. No other preset is viable.

At 1920x1080, the Low preset delivers 72 FPS average, exceeding the threshold by 12 FPS. Medium settings produce 45 FPS, High produces 42 FPS, and Ultra produces 35 FPS. The best playable setting is Low, with an average of 72 FPS. This is the only resolution where the margin above 60 FPS is comfortable.

The data shows that the step from Low to Medium costs 19 FPS at 1080p (from 72 to 45), 24 FPS at 1440p (from 64 to 40), and 20 FPS at 4K (from 54 to 34). The visual quality increase from Low to Medium is substantial, but the frame rate penalty is too large for any resolution to remain playable. Users who prioritize smoothness over visuals must stay on Low, and even then, only at 1440p and 1080p.

# FAQ

Q: Can this PC run Overpower at 4K?

A: No. The highest average frame rate at 3840x2160 is 54 FPS on Low settings, which falls below the 60 FPS playable threshold. Medium, High, and Ultra all produce averages in the 26 to 34 FPS range.

Q: What is the best playable setting at 1440p?

A: Low settings are the only playable option at 2560x1440, delivering 64 FPS average. Medium settings drop to 40 FPS, High to 37 FPS, and Ultra to 31 FPS.

Q: What is the best playable setting at 1080p?

A: Low settings are the only playable option at 1920x1080, delivering 72 FPS average. Medium settings drop to 45 FPS, High to 42 FPS, and Ultra to 35 FPS.

Q: How does the CPU compare to its nearest rivals?

A: The AMD Ryzen 9 9950X3D scores 75779 on average. Its nearest rivals are the AMD Ryzen 7 PRO 9755 (75738, 0.1% behind), the AMD Ryzen 7 PRO 9755X3D (75716, 0.1% behind), the AMD EPYC 8224P (75582, 0.3% behind), and the Intel Core Ultra 9 285 (75488, 0.4% behind). These differences are negligible for gaming.

Q: How does the GPU compare to its nearest rivals?

A: The Intel Arc B390 scores 1482 on the 3DMark Steel Nomad DX12 test. Its nearest rivals are the NVIDIA GeForce GT 520MX (1463, 1.3% behind), the NVIDIA GeForce 800M (1460, 1.5% behind), the NVIDIA GeForce GT 625 OEM (1446, 2.5% behind), and the NVIDIA GeForce GT 710 (1443, 2.7% behind). All are within a small margin.

Q: Does the CPU or GPU limit performance in Overpower?

A: The GPU is the limiting factor. The CPU ranks in the 95th percentile among all processors, while the GPU ranks in the 9th percentile among all graphics cards. The frame rates are consistently low across all resolutions, which points to the GPU as the bottleneck.

# CPU and GPU Roles

The recorded data shows a clear division of responsibility. The AMD Ryzen 9 9950X3D is a high-end processor with 16 cores, 32 threads, and a 128 MB L3 cache. It scores 42018 in Cinebench R23 multi-core and 2259 in single-core. In the database, it ranks in the 95th percentile among all CPUs, with an average benchmark score of 75779. The Intel Arc B390, by contrast, is a low-end integrated-style GPU with 1536 shading units, 48 TMUs, and 24 ROPs. It scores 1482 in the 3DMark Steel Nomad DX12 test and ranks in the 9th percentile among all GPUs.

The scaling between resolutions reveals the GPU's dominance. At Low settings, the average FPS goes from 54 at 4K to 64 at 1440p to 72 at 1080p. That is a 33% improvement from 4K to 1080p (from 54 to 72). If the CPU were the bottleneck, lowering the resolution would not produce such large gains, because the CPU would still be limited by its own throughput. The fact that resolution scaling yields significant FPS improvements indicates the GPU is doing most of the work and is the constraining component.

The scaling between presets reinforces this. At 1080p, dropping from Ultra to Low raises the average from 35 to 72 FPS, a 106% increase. At 1440p, the same drop raises the average from 31 to 64 FPS, a 106% increase. At 4K, the drop from Ultra to Low raises the average from 26 to 54 FPS, a 108% increase. These percentage gains are nearly identical across resolutions, which suggests the GPU's rendering workload scales linearly with settings and resolution, and the CPU has enough headroom to feed it at all tested points.

The CPU's role becomes more apparent at lower resolutions and settings. At 1080p Low, the system reaches 72 FPS, which is 20% above the 60 FPS threshold. At 1440p Low, it reaches 64 FPS, which is 6.7% above the threshold. The CPU can sustain these frame rates without issue. The lack of min/max data for Low settings prevents a full frame-time analysis, but the averages are consistent with a CPU that is not limiting. For Medium, High, and Ultra presets, the GPU is clearly the bottleneck, as even the strongest CPU cannot compensate for the GPU's low compute throughput.

# How This Combo Ranks

In the database, this combination of the AMD Ryzen 9 9950X3D and the Intel Arc B390 ranks 3301 out of 3713 tested combos for Overpower. This places it in the bottom 11% of all tested systems. The rank reflects the GPU's poor performance, as the CPU alone would rank much higher. The 4K Ultra preset averages 26 FPS, and the 1080p Low preset averages 72 FPS, which is the only result that exceeds the playable threshold by a meaningful margin.

The rank of 3301 out of 3713 means that only 412 tested combos perform worse. The vast majority of systems in the database deliver higher frame rates in Overpower. This is not surprising given the GPU's 9th percentile standing. The CPU's 95th percentile standing does not rescue the combo, because the GPU is the limiting factor in every measured scenario. The data shows that the combo is viable only for low-resolution, low-settings play, and even then, the margin above 60 FPS is thin at 1440p.

For context, the CPU's nearest rivals (the AMD Ryzen 7 PRO 9755, the AMD Ryzen 7 PRO 9755X3D, the AMD EPYC 8224P, and the Intel Core Ultra 9 285) would all produce nearly identical ranks if paired with the same GPU, since their benchmark scores are within 0.4% of the 9950X3D. The GPU's nearest rivals (the NVIDIA GeForce GT 520MX, the GeForce 800M, the GeForce GT 625 OEM, and the GeForce GT 710) would also produce similar ranks, as their scores are within 2.7% of the Arc B390. The combination's rank is driven almost entirely by the GPU's position at the bottom of the performance scale.

# The Verdict

Can this PC run Overpower? The answer depends on the resolution and preset. According to the verdict data, at 3840x2160, there are no playable settings. The highest average is 54 FPS on Low, which misses the 60 FPS threshold by 6 FPS. At 2560x1440, the only playable setting is Low, which delivers 64 FPS average. At 1920x1080, the only playable setting is Low, which delivers 72 FPS average.

The configuration is therefore suitable for 1080p Low and 1440p Low gameplay. At 1080p, the 72 FPS average provides a 20% cushion above the playable threshold. At 1440p, the 64 FPS average provides a 6.7% cushion, which is workable but less comfortable. At 4K, the system cannot maintain 60 FPS at any preset, so 4K gaming is not viable for this combination.

The root cause is the GPU. The Intel Arc B390 is a low-power integrated solution with 80 W TDP, 7.680 TFLOPS FP32 performance, and a 9th percentile ranking. The CPU, by contrast, is a 170 W desktop processor with 16 cores and a 95th percentile ranking. The imbalance is stark. Users who want to play Overpower at higher settings or resolutions would need a more capable GPU, but the database does not include data for alternative GPU pairings. Based solely on the recorded numbers, this PC can run Overpower only at Low settings, and only at 1440p or lower.