Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Overpower
Action 2023

Overpower

52%
Playable Your system meets minimum requirements.

Performance

1080p (Full HD)

Low 1080p Measured
65 FPS
Ultra 1080p Measured
31 FPS

1440p (2K / QHD)

Low 1440p Measured
58 FPS
Ultra 1440p Measured
28 FPS

4K (Ultra HD)

Low 4K Measured
49 FPS
Ultra 4K Measured
24 FPS
26.3ms Frame Time
39ms Input Latency
1440p Best Resolution

Requirements Check

Processor
Required 37,513
Your CPU 75,779
Graphics Card
Required 27,382
Your GPU 1,184

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 24 28 31 49
1440p QHD 28 34 36 58
1080p Full HD 31 38 41 65

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 38
1920x1080 Low 65
1920x1080 Medium 41
1920x1080 Ultra 31
2560x1440 High 34
2560x1440 Low 58
2560x1440 Medium 36
2560x1440 Ultra 28
3840x2160 High 28
3840x2160 Low 49
3840x2160 Medium 31
3840x2160 Ultra 24

Performance Analysis: Overpower on Your System

The AMD Ryzen 9 9950X3D pairs with the Intel Arc B370 in a configuration that is heavily weighted toward processor capability, while the graphics side is a low-power integrated solution. For the game Overpower, an action title released in 2023, the recorded data shows that this combination struggles to maintain smooth frame rates at higher resolutions and settings. The CPU posts strong multi-threaded scores, placing it in the 95th percentile among all processors tested, but the GPU sits in the 5th percentile, with a 3DMark Steel Nomad DX12 score of 1184. The bottleneck is clearly the graphics component, as the measured performance in Overpower falls below the 60 FPS playable threshold at most configurations tested.

FAQ

Q: What is the highest average frame rate this combination achieves in Overpower?

A: The highest recorded average FPS is 65, observed at 1920x1080 resolution with Low settings. This is the only configuration that clears the 60 FPS playable threshold.

Q: Is Overpower playable at 2560x1440 with this CPU and GPU?

A: No. At 2560x1440, the best recorded average is 58 FPS on Low settings, which falls short of the 60 FPS threshold. The verdict data lists no playable settings for this resolution.

Q: How does the CPU benchmark compare to its nearest rivals?

A: The Ryzen 9 9950X3D has an average benchmark score of 75779, which is 0.1% ahead of the AMD Ryzen 7 PRO 9755 and the AMD Ryzen 7 PRO 9755X3D, 0.3% ahead of the AMD EPYC 8224P, and 0.4% ahead of the Intel Core Ultra 9 285.

Q: What is the GPU's performance percentile?

A: The Intel Arc B370 sits in the 5th percentile among all GPUs, with an average benchmark score of 1184 from the 3DMark Steel Nomad DX12 test. Its nearest rival, the ATI Mobility Radeon HD 5570, scores 1186, which is 0.2% higher.

Q: Does the combination rank well among all tested combos for this game?

A: The combo ranks 3427 out of 3713 tested combinations for Overpower, placing it in the lower portion of the database. This indicates that most other combinations deliver higher frame rates.

Q: What is the minimum FPS recorded at 1920x1080 Medium settings?

A: At 1920x1080 with Medium settings, the average FPS is 41, with a minimum of 34 FPS and a maximum of 47 FPS. This shows significant frame dips below the average.

Similar Performance Alternatives

Looking at the CPU side, the Ryzen 9 9950X3D's average benchmark score of 75779 places it extremely close to several other processors. The AMD Ryzen 7 PRO 9755 scores 75738, a delta of just 0.1%, meaning the two chips will behave nearly identically in most workloads. Similarly, the AMD Ryzen 7 PRO 9755X3D scores 75716, also a 0.1% difference, and the AMD EPYC 8224P scores 75582, a 0.3% difference. The Intel Core Ultra 9 285 is the furthest among the listed rivals, with a score of 75488, a 0.4% difference. For Overpower, any of these CPUs would provide essentially the same processor-side performance, suggesting that the gameplay experience would be unchanged if one of these alternatives were installed.

On the GPU front, the Intel Arc B370 has a very low average score of 1184. Its nearest rivals are all older or lower-end parts: the ATI Mobility Radeon HD 5570 scores 1186, which is 0.2% higher; the ATI Radeon HD 5770 scores 1190, a 0.5% difference; the AMD Radeon HD 7650M scores 1192, a 0.7% difference; and the AMD FirePro M2000 scores 1168, which is 1.4% lower. These delta values are all within a couple of percent, meaning the Arc B370 and these alternatives would deliver similar graphics performance in Overpower. Users coming from any of these GPUs would observe comparable frame rates, with the Arc B370 being slightly slower than the HD 5570, HD 5770, and HD 7650M, and slightly faster than the FirePro M2000.

Given the GPU's low scores, the practical takeaway is that this combo behaves like a system with a very modest integrated graphics solution. The CPU's high scores do little to lift the gaming experience because Overpower is limited by the graphics pipeline. The data shows this pairing aligns with other low-end GPU configurations rather than the high-end CPU performance.

How This Combo Ranks

In the database of tested combinations for Overpower, this specific pairing of the AMD Ryzen 9 9950X3D and Intel Arc B370 ranks 3427 out of 3713 total combinations. This places it in the bottom 8% of all tested systems, indicating that the vast majority of other CPU and GPU pairings achieve better frame rates in this action game. The rank reflects the GPU's severe limitation, as the CPU's high percentile does not translate into playable performance when paired with such a weak graphics component.

To contextualize the rank, consider that the combo sits near the lower end of the distribution. With 3713 total combinations, a rank of 3427 means there are only 286 combinations that perform worse. The data indicates that this system is not suited for Overpower at higher presets, and even at the lowest settings, it barely scrapes past the 60 FPS threshold only at 1080p. The combo's position in the database suggests that users seeking a playable experience would need to either lower expectations to 1080p Low or consider a different graphics solution entirely.

The recorded FPS values reinforce this ranking. At 3840x2160, the average frame rates range from 24 FPS on Ultra to 49 FPS on Low, none of which approach the 60 FPS target. At 2560x1440, the range is 28 FPS on Ultra to 58 FPS on Low, with the Low setting still missing 60 FPS by 2 frames. Only at 1920x1080 does the system hit the threshold, and only on Low settings, with an average of 65 FPS. These numbers align with the combo's low rank, confirming that it is one of the weaker configurations in the database for this game.

The Verdict

Can this PC run Overpower? The verdict by resolution is clear: at 3840x2160, there are no playable settings, meaning no preset achieves an average of 60 FPS. The best result at this resolution is 49 FPS on Low, which is below the threshold. At 2560x1440, the same situation applies: no playable settings exist, with the highest average being 58 FPS on Low. Only at 1920x1080 does the system become playable, and only with the Low preset, which delivers an average of 65 FPS.

The verdict data lists the best settings for 1920x1080 as Low, with an average FPS of 65. For both 2560x1440 and 3840x2160, there is no best settings entry because no configuration reaches 60 FPS. This means that for a smooth experience, the user must run the game at 1080p with all graphical options set to Low. Any increase in resolution or preset level will result in frame rates below the playable threshold, with the lowest recorded average being 24 FPS at 4K Ultra.

The practical conclusion is that this combination is only viable for Overpower at the lowest possible settings and resolution. It cannot handle medium, high, or ultra presets at any resolution without dropping below 60 FPS. For users with a 1080p monitor, the game will run, but with minimal visual fidelity. For those with higher-resolution displays, the system will not meet the playable criteria.

Measured FPS Breakdown

The measured FPS data provides a detailed picture of performance across three resolutions and four settings. At 3840x2160, the averages are as follows: High settings yield 28 FPS, Low settings yield 49 FPS, Medium settings yield 31 FPS with a minimum of 26 and a maximum of 35, and Ultra settings yield 24 FPS. The gap between Low and High is 21 FPS, showing that the GPU's limited capabilities are heavily taxed by increased graphical demands. No minimum or maximum values are recorded for High, Low, or Ultra at this resolution, but the Medium setting shows a range of 26 to 35 FPS, indicating some variability.

Moving to 2560x1440, the averages improve but remain below the threshold. High settings produce 34 FPS, Low settings produce 58 FPS, Medium settings produce 36 FPS with a minimum of 31 and a maximum of 42, and Ultra settings produce 28 FPS. The Low setting at 1440p is the closest to 60 FPS across all higher resolutions, but it still falls short by 2 FPS. The difference between Low and Ultra at this resolution is 30 FPS, highlighting the steep cost of higher presets.

At 1920x1080, the only playable configuration appears. High settings average 38 FPS, Low settings average 65 FPS, Medium settings average 41 FPS with a minimum of 34 and a maximum of 47, and Ultra settings average 31 FPS. The Low preset is the sole entry that exceeds 60 FPS, and it does so by a margin of 5 FPS. The Medium setting's minimum of 34 FPS shows that even at 1080p, moderate settings cause significant drops below the average. The data shows a consistent pattern: as resolution decreases or settings are lowered, frame rates rise, but only the lowest combination reaches playable levels.

Best Settings per Resolution

For each resolution, the best settings are defined as the most demanding preset that maintains an average of at least 60 FPS. At 3840x2160, no preset meets this criterion. The highest average is 49 FPS on Low, which is 11 FPS below the target. Therefore, there are no best settings at this resolution, and the system cannot deliver a playable experience.

At 2560x1440, similarly, no preset reaches 60 FPS. The Low setting averages 58 FPS, which is 2 FPS short of the threshold. Since the playable threshold is 60 FPS, this resolution has no best settings. Users would need to accept a frame rate below 60 FPS, which the database does not classify as playable.

At 1920x1080, the Low setting is the only one that clears 60 FPS, with an average of 65 FPS. This is the best settings choice for this resolution. The next step up, Medium, averages 41 FPS, which is far below the threshold, so there is no option to increase quality while maintaining playability. The data indicates that 1080p Low is the ceiling for this system in Overpower.

CPU and GPU Roles

In this configuration, the CPU and GPU play distinctly different roles depending on the resolution and settings. The Ryzen 9 9950X3D is a high-end processor with a PassMark multithread score of 70255, a Cinebench R23 multicore score of 42018, and a single-core Geekbench score of 3064. These scores place it in the 95th percentile among all CPUs, indicating that it is more than capable of handling the computational demands of Overpower. However, the Intel Arc B370 is an integrated graphics solution with a 3DMark Steel Nomad score of 1184, placing it in the 5th percentile. Its FP32 throughput is 6.144 TFLOPS, and it has 1280 shading units, 40 texture mapping units, and 20 raster output units.

The data shows that the GPU is the limiting factor at all resolutions. At 3840x2160, the average FPS drops from 49 on Low to 24 on Ultra, a decrease of 25 FPS, which is a 51% reduction. This scaling is attributable to the GPU's inability to handle the increased pixel count and shading demands. The CPU, with its high single-thread and multi-thread scores, is not the bottleneck; even at 4K, the processor has ample headroom. The GPU's low pixel rate of 48.00 GPixel/s and texture rate of 96.00 GTexel/s constrain the output.

At 2560x1440, the pattern continues. Low settings average 58 FPS, while Ultra averages 28 FPS, a 30 FPS difference. The GPU is still the dominant factor, as the CPU's performance is unchanged across these settings. The GPU's boost clock of 2400 MHz and base clock of 300 MHz do not compensate for its limited architecture, which is based on Xe3-LPG with 10 ray tracing cores but only 6.144 TFLOPS of FP32 performance.

At 1920x1080, the GPU's limitations become slightly less severe, but it remains the primary constraint. Low settings reach 65 FPS, but Medium drops to 41 FPS, a 24 FPS reduction. The CPU's role is minimal here; the processor's 16 cores and 32 threads are more than sufficient for the game's logic, but the GPU cannot render frames fast enough at higher presets. The scaling between resolutions shows this: at Low settings, going from 1080p to 1440p reduces FPS from 65 to 58, a drop of 7 FPS; going from 1080p to 4K reduces it from 65 to 49, a drop of 16 FPS. These declines are directly tied to the GPU's fill rate and memory bandwidth, which is system-shared and system-dependent.

The CPU's high performance does not translate into better frame rates because the GPU is the bottleneck. The data shows that at every resolution, the difference between Low and Ultra settings is large, indicating that graphical workload, not CPU workload, drives the frame rate. For Overpower, this means that upgrading the GPU would yield significant improvements, while the CPU would remain underutilized. The recorded scores confirm this: the CPU's average benchmark score is 75779, while the GPU's is 1184, a disparity that highlights the imbalance in this pairing.