Instant compatibility check with FPS benchmarks and optimization tips
Overpower
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 40 | 49 | 52 | 84 |
| 1440p QHD | 47 | 57 | 62 | 98 |
| 1080p Full HD | 53 | 64 | 69 | 110 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Overpower on Your System
The AMD Ryzen 9 9900X3D paired with the Intel Arc B570 delivers a playable experience in Overpower, but the margin for error is slim at higher resolutions. This combination sits at the 60 FPS threshold only at specific settings, and the data shows that 4K gaming requires significant compromises. The benchmark results indicate a system that is well-balanced for 1080p and 1440p gaming, but one that runs out of headroom when pushing 4K Ultra settings.
Best Settings per Resolution
At 3840x2160, the most demanding preset that stays at or above 60 FPS is Low, which delivers an average of 84 FPS. This is the only playable setting at 4K; the Medium preset drops to 52 FPS average, and High falls to 49 FPS, both below the playable threshold. Ultra is the worst performer at 40 FPS average.
For 2560x1440, the best playable preset is Medium, achieving an average of 62 FPS. This barely clears the 60 FPS threshold, with a minimum of 52 FPS and maximum of 71 FPS. While the Low preset is faster at 98 FPS average, Medium offers a better visual experience while still maintaining playable performance. High at 57 FPS and Ultra at 47 FPS both fall short of the threshold.
At 1920x1080, the best playable preset is High, which averages 64 FPS. This is the sweet spot for this resolution, offering a good balance of visual quality and performance. The Low preset runs at 110 FPS average, while Medium sits at 69 FPS. Ultra again fails to hit 60 FPS, averaging only 53 FPS.
Similar Performance Alternatives
Looking at the CPU side, the AMD Ryzen 9 9900X3D has an average benchmark score of 54762. The closest rival is the Intel Core Ultra 5 245KF, which scores 55093 — a negligible -0.6% difference, meaning these two processors will perform nearly identically in Overpower. The Intel Core Ultra 5 245K scores 54053 (1.3% slower), while the Intel Xeon 6505P scores 53701 (2% slower). The Intel Core i7-14700F is the furthest behind at 53620 (2.1% slower). In practical terms, any of these CPUs would deliver the same frame rates as the 9900X3D, as the game is not heavily CPU-bound in most scenarios.
For the GPU, the Intel Arc B570 has an average benchmark score of 20556. Its nearest rival is the NVIDIA GeForce RTX 3070 Mobile, which scores 20534 (0.1% difference) — effectively identical performance. The Intel Arc A750 scores 20582 (-0.1%), meaning it would behave the same way in Overpower. The NVIDIA Quadro M4000M scores 20480 (0.4% slower), and the AMD Radeon R9 M390X scores 20662 (-0.5% faster). For gaming, the RTX 3070 Mobile and Arc A750 are the most relevant comparisons; all four alternatives would produce nearly identical FPS numbers at every resolution and preset.
Measured FPS Breakdown
The measured data provides a complete picture of performance. At 3840x2160, the Ultra preset averages 40 FPS, High averages 49 FPS, Medium averages 52 FPS with a minimum of 44 FPS and maximum of 60 FPS, and Low averages 84 FPS. The jump from Medium to Low is substantial — a 32 FPS gain — which indicates the GPU is the limiting factor at this resolution.
At 2560x1440, Ultra averages 47 FPS, High averages 57 FPS, Medium averages 62 FPS with a minimum of 52 FPS and maximum of 71 FPS, and Low averages 98 FPS. The scaling here is more gradual, with each preset step costing roughly 5-15 FPS. The Medium preset's minimum of 52 FPS is concerning, as it suggests occasional dips below the playable threshold even when the average is above 60 FPS.
At 1920x1080, Ultra averages 53 FPS, High averages 64 FPS, Medium averages 69 FPS with a minimum of 59 FPS and maximum of 79 FPS, and Low averages 110 FPS. The Medium preset has a minimum of 59 FPS, which is just barely below the 60 FPS threshold — this could cause noticeable stutters in intense action scenes. The High preset, despite a lower average, may offer a more consistent experience because it has no reported minimum below the threshold.
The Verdict
The data clearly shows that this system can run Overpower at 60 FPS, but only with specific settings. At 3840x2160, the only playable preset is Low, which averages 84 FPS. The verdictByResolution confirms that Medium, High, and Ultra all fail to reach the 60 FPS threshold at 4K, with averages of 52 FPS, 49 FPS, and 40 FPS respectively.
At 2560x1440, the system clears the threshold with Medium settings, averaging 62 FPS. This is the recommended resolution for this combo if you want a balance of visual quality and performance. The High preset at 57 FPS is close but misses the mark, and Ultra at 47 FPS is not viable.
At 1920x1080, the system is comfortably playable at High settings, averaging 64 FPS, and even Medium at 69 FPS averages are above threshold. However, Ultra at 53 FPS still fails to hit 60 FPS. This suggests the GPU is the primary bottleneck, as even at 1080p, the highest preset cannot maintain playable frame rates.
CPU and GPU Roles
The performance scaling across resolutions reveals which component matters more. The CPU, AMD Ryzen 9 9900X3D, has a 91st percentile ranking among all CPUs, while the GPU, Intel Arc B570, sits at the 65th percentile. This disparity is reflected in the frame rates: the system becomes increasingly GPU-bound as resolution rises.
At 3840x2160, the GPU dominates the performance equation. The difference between Low (84 FPS) and Ultra (40 FPS) is 44 FPS, a massive drop that indicates the GPU is fully saturated. The CPU's 12 cores and 24 threads, with a max-thread benchmark score of 13795, are unlikely to be the limiting factor at this resolution.
At 2560x1440, the balance shifts slightly. The scaling from Low (98 FPS) to Medium (62 FPS) is 36 FPS, still significant but less extreme than at 4K. The Medium preset's minimum of 52 FPS suggests that some scenes are more demanding, potentially causing brief CPU bottlenecks in physics-heavy moments.
At 1920x1080, the CPU's role becomes more relevant. The drop from Low (110 FPS) to Medium (69 FPS) is 41 FPS, and the Medium preset's minimum of 59 FPS hints at occasional CPU limitations. The single-thread benchmark score of 1269 and 8-thread score of 9002 are strong, but Overpower appears to have scenes that stress even this capable processor. The CPU is likely the reason why Ultra at 1080p only averages 53 FPS — the GPU may have headroom, but the CPU cannot feed it fast enough in all situations.
How This Combo Ranks
The AMD Ryzen 9 9900X3D + Intel Arc B570 combination ranks 2987 out of 3713 tested combos in Overpower. This places it in the lower-middle tier of tested systems, which is consistent with the GPU's 65th percentile ranking. The 91st percentile CPU is held back by the mid-range GPU, resulting in a system that performs well at 1080p and 1440p but struggles at 4K.
The ranking of 2987 out of 3713 means roughly 80% of tested combos perform better, which may seem surprising given the strong CPU. However, the data shows that Overpower is heavily GPU-dependent, especially at higher resolutions. The Arc B570's 11.52 TFLOPS of FP32 performance and 380.0 GB/s memory bandwidth are adequate for 1080p and 1440p, but the 10 GB GDDR6 memory and 160-bit bus width become limiting factors at 4K Ultra.
This combo is best suited for gamers who prioritize 1080p or 1440p gaming with high refresh rates. At 1080p High, the 64 FPS average is solid, and the 110 FPS average at Low settings provides a competitive edge for fast-paced action. The 1440p Medium preset at 62 FPS is the most balanced option, offering good visual fidelity without sacrificing playability. For 4K, the Low preset at 84 FPS is the only viable choice, and even then, the visual quality is significantly reduced. Users with 4K displays should consider a more powerful GPU, as this combination cannot handle Overpower at high settings in 4K.