Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Overpower
Action 2023

Overpower

52%
Playable Your system meets minimum requirements.

Performance

1080p (Full HD)

Low 1080p Measured
65 FPS
Ultra 1080p Measured
31 FPS

1440p (2K / QHD)

Low 1440p Measured
58 FPS
Ultra 1440p Measured
28 FPS

4K (Ultra HD)

Low 4K Measured
49 FPS
Ultra 4K Measured
24 FPS
26.3ms Frame Time
39ms Input Latency
1440p Best Resolution

Requirements Check

Processor
Required 37,513
Your CPU 54,762
Graphics Card
Required 27,382
Your GPU 1,184

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 24 28 31 49
1440p QHD 28 34 36 58
1080p Full HD 31 38 41 65

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 38
1920x1080 Low 65
1920x1080 Medium 41
1920x1080 Ultra 31
2560x1440 High 34
2560x1440 Low 58
2560x1440 Medium 36
2560x1440 Ultra 28
3840x2160 High 28
3840x2160 Low 49
3840x2160 Medium 31
3840x2160 Ultra 24

Performance Analysis: Overpower on Your System

Measured FPS Breakdown

The recorded data for Overpower with the AMD Ryzen 9 9900X3D and Intel Arc B370 shows a clear pattern across resolutions and presets. At 3840x2160, the highest resolution tested, the frame rates are consistently below the 60 FPS playable threshold. The Low preset delivers an average of 49 FPS, while Medium drops to 31 FPS with a minimum of 26 FPS and a maximum of 35 FPS. High settings produce 28 FPS on average, and Ultra falls further to 24 FPS. No min or max values were recorded for Low, High, or Ultra at this resolution, only the Medium preset includes those figures.

Moving down to 2560x1440, performance improves but remains shy of the playable threshold across all presets. The Low preset reaches an average of 58 FPS, just two frames short of 60. Medium averages 36 FPS with a range of 31 to 42 FPS. High settings produce 34 FPS on average, and Ultra drops to 28 FPS. As with 4K, only Medium includes min and max values in the recorded data.

At 1920x1080, the picture changes meaningfully. The Low preset is the only configuration that clears the 60 FPS mark, averaging 65 FPS. Medium averages 41 FPS with a minimum of 34 and a maximum of 47. High settings average 38 FPS, and Ultra averages 31 FPS. The scaling from 1440p to 1080p is modest for the lower presets: Low improves from 58 to 65 FPS, while Medium, High, and Ultra each gain roughly 5 to 7 FPS.

The gap between presets is consistent. Across all resolutions, Low performs substantially better than Medium, and Medium outperforms High by a small margin, while Ultra sits at the bottom. At 4K, the spread from Low to Ultra is 49 down to 24 FPS, a 25 FPS difference. At 1440p, the spread is 58 to 28 FPS, a 30 FPS difference. At 1080p, the spread is 65 to 31 FPS, a 34 FPS difference. The preset scaling becomes more pronounced as resolution decreases, indicating that the GPU has more headroom to show setting-level differences at lower pixel counts.

CPU and GPU Roles

The data indicates that the Intel Arc B370 is the limiting component for Overpower in this configuration. The Ryzen 9 9900X3D is a high-end desktop processor with 12 cores, 24 threads, and a boost clock of 5.50 GHz, placing it in the 91st percentile among all CPUs in the database. Its average benchmark score of 54762 puts it just 0.6% behind the Intel Core Ultra 5 245KF and 1.3% ahead of the Intel Core Ultra 5 245K. This is not a processor that would bottleneck an integrated graphics solution.

The Arc B370, by contrast, sits in the 5th percentile among all GPUs, with an average benchmark score of 1184 from the 3DMark Steel Nomad DX12 test. Its nearest rivals include the ATI Mobility Radeon HD 5570 (0.2% faster), the ATI Radeon HD 5770 (0.5% faster), and the AMD Radeon HD 7650M (0.7% faster). This is entry-level integrated graphics territory. The GPU has 1280 shading units, 40 texture mapping units, and 20 raster output units, with a boost clock of 2400 MHz and a TDP of 25 W.

The resolution scaling in the measured FPS confirms the GPU-bound nature of this pairing. From 1080p Low to 1440p Low, the average drops from 65 to 58 FPS, a 10.8% reduction. From 1440p Low to 4K Low, it drops from 58 to 49 FPS, a 15.5% reduction. These are substantial losses that track with pixel count increases, which is typical when the graphics processor is the constraint. If the CPU were the bottleneck, the frame rate would remain relatively flat as resolution increases, since the CPU work per frame stays roughly constant. The data does not show that pattern.

The preset scaling reinforces the same conclusion. At 1080p, moving from Low to Medium costs 24 FPS (65 to 41), and from Medium to High costs another 3 FPS (41 to 38). At 4K, the same Low-to-Medium transition costs 18 FPS (49 to 31). The GPU is doing the heavy lifting for every setting change, and its modest compute resources (6.144 TFLOPS FP32) are quickly saturated.

For this game, the CPU is effectively a bystander. Even at 1080p Low, where the GPU is least stressed, the Arc B370 cannot push past 65 FPS. The Ryzen 9 9900X3D's single-thread performance, measured at 1269 in 3DMark single-thread and 6739 in Cinebench R23 single-core, is far beyond what Overpower requires at these frame rates. The database shows no scenario where the CPU becomes the limiting factor.

FAQ

Q: Can this combination run Overpower at 60 FPS in 1080p?

A: Yes, but only on the Low preset. The measured average at 1920x1080 with Low settings is 65 FPS. Medium, High, and Ultra all fall below 60 FPS, with averages of 41, 38, and 31 FPS respectively.

Q: What is the best playable setting at 2560x1440?

A: None of the presets at 1440p reach the 60 FPS threshold. The closest is Low, which averages 58 FPS. Medium averages 36 FPS, High 34 FPS, and Ultra 28 FPS. The verdict data lists no playable settings for this resolution.

Q: How does the GPU compare to its nearest rivals?

A: The Intel Arc B370 has an average benchmark score of 1184. The ATI Mobility Radeon HD 5570 scores 1186 (0.2% faster), the ATI Radeon HD 5770 scores 1190 (0.5% faster), and the AMD Radeon HD 7650M scores 1192 (0.7% faster). The AMD FirePro M2000 scores 1168 (1.4% slower). This places the Arc B370 in the 5th percentile of all GPUs in the database.

Q: Is the Ryzen 9 9900X3D holding back the frame rate?

A: No. The CPU ranks in the 91st percentile among all CPUs with an average benchmark score of 54762. Its nearest rival, the Intel Core Ultra 5 245KF, scores 55093, just 0.6% higher. The frame rate scaling between resolutions shows the GPU is the limiting component.

Q: What frame rate can I expect at 4K with Medium settings?

A: The recorded average is 31 FPS, with a minimum of 26 FPS and a maximum of 35 FPS. This is well below the 60 FPS playable threshold, and the verdict data lists no playable settings at 3840x2160.

Q: How much performance is lost when going from Ultra to Low at 1080p?

A: The average frame rate more than doubles. Ultra averages 31 FPS, while Low averages 65 FPS. That is a 34 FPS difference, or roughly 110% higher performance on Low compared to Ultra.

Similar Performance Alternatives

For the CPU, the nearest rivals in the database are all Intel parts with similar average scores. The Intel Core Ultra 5 245KF scores 55093, which is 0.6% higher than the Ryzen 9 9900X3D's 54762. The Intel Core Ultra 5 245K scores 54053, 1.3% lower. The Intel Xeon 6505P scores 53701, 2% lower. The Intel Core i7-14700F scores 53620, 2.1% lower. Any of these processors would deliver essentially identical frame rates in Overpower when paired with the Arc B370, since the GPU is the bottleneck.

For the GPU, the nearest rivals are older discrete and mobile parts. The ATI Radeon HD 5770 scores 1190, which is 0.5% higher than the Arc B370's 1184. The ATI Mobility Radeon HD 5570 scores 1186, 0.2% higher. The AMD Radeon HD 7650M scores 1192, 0.7% higher. The AMD FirePro M2000 scores 1168, 1.4% lower. In practical terms, these are all within a couple of percent of each other, so the frame rates in Overpower would be nearly identical across this group. The Arc B370 is an integrated graphics part with a 25 W TDP, and its performance class matches these legacy discrete GPUs from over a decade ago.

If a builder were considering a different GPU in the same performance class, the expected Overpower frame rates would track the 3DMark Steel Nomad scores closely. A GPU scoring 1192 instead of 1184 would likely produce a 1 FPS improvement at most, which is within measurement noise. The differences among these rivals are negligible for gameplay purposes.

How This Combo Ranks

The combination of the AMD Ryzen 9 9900X3D and Intel Arc B370 ranks 3427 out of 3713 tested combos in Overpower. This places it in the bottom 7.7% of all configurations in the database. The ranking reflects the severe imbalance between a top-tier CPU and a bottom-tier GPU. The processor alone ranks in the 91st percentile among CPUs, but the GPU's 5th percentile standing drags the overall combo down.

Within the context of the database, this combo is not competitive for Overpower at higher settings. The 3713 total combos include many with midrange and high-end graphics cards, and the Arc B370's integrated-class performance cannot keep pace. The rank of 3427 means that roughly 386 tested combinations perform worse. Those are likely pairings with even older or weaker integrated graphics or very low-end discrete parts.

The data suggests that the CPU choice has almost no bearing on this ranking. If the Ryzen 9 9900X3D were replaced with any of its nearest rivals, the combo rank would shift by only a few positions at most, since the GPU would still produce the same frame rates. The ranking is effectively a measure of the GPU's performance in this game, with the CPU contributing little.

The Verdict

This PC can run Overpower, but only under narrow conditions. The verdict data lists exactly one playable configuration: 1920x1080 with Low settings, which averages 65 FPS. That clears the 60 FPS threshold by 5 frames. Every other combination of resolution and preset falls short.

At 2560x1440, no preset reaches 60 FPS. The closest is Low at 58 FPS, which is technically below the playable threshold. At 3840x2160, the situation is worse: Low averages 49 FPS, Medium 31 FPS, High 28 FPS, and Ultra 24 FPS. None of these are playable by the 60 FPS standard used in the database.

For a practical recommendation: if you own this combination and want to play Overpower, set the resolution to 1080p and the preset to Low. That is the only configuration that delivers a smooth experience. Anything higher in resolution or settings will result in frame rates that are visibly stuttery, particularly during action sequences where the minimum frame rate on Medium at 1080p drops to 34 FPS.

The bottleneck is unambiguous. The Ryzen 9 9900X3D is a 12-core, 24-thread processor with a 5.50 GHz boost clock and a 128 MB L3 cache. It is not the problem. The Intel Arc B370, with its 1280 shading units and 6.144 TFLOPS FP32 throughput, is the constraint. Its 25 W TDP and integrated nature make it suitable for basic productivity or light gaming, but Overpower at high settings is beyond its reach.

If the goal is 60 FPS at higher presets or resolutions, the GPU must be upgraded. The data does not suggest any driver or setting tweak that would close a gap of this magnitude. The Arc B370 is simply in a different performance class than what Overpower demands for a high-refresh experience. For 1080p Low, this combo works. For anything else, it falls short.