Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Overpower
Action 2023

Overpower

89%
Great Match Your system meets recommended requirements.

Performance

1080p (Full HD)

Low 1080p Measured
127 FPS
Ultra 1080p Measured
61 FPS

1440p (2K / QHD)

Low 1440p Measured
109 FPS
Ultra 1440p Measured
51 FPS

4K (Ultra HD)

Low 4K Measured
95 FPS
Ultra 4K Measured
47 FPS
14.3ms Frame Time
21ms Input Latency
4K Best Resolution

Requirements Check

Processor
Required 37,513
Your CPU 41,376
Graphics Card
Required 27,382
Your GPU 23,021

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 47 58 57 95
1440p QHD 51 65 70 109
1080p Full HD 61 70 76 127

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 70
1920x1080 Low 127
1920x1080 Medium 76
1920x1080 Ultra 61
2560x1440 High 65
2560x1440 Low 109
2560x1440 Medium 70
2560x1440 Ultra 51
3840x2160 High 58
3840x2160 Low 95
3840x2160 Medium 57
3840x2160 Ultra 47

Performance Analysis: Overpower on Your System

The AMD Ryzen 9 5900X paired with the Intel Arc B580 delivers a playable experience in Overpower, but the margin for error varies sharply by resolution. At 1080p, the combo clears the 60 FPS threshold at every settings preset, including Ultra. At 1440p, it remains playable at High, Medium, and Low, but falls short at Ultra. At 4K, the system is only viable at Low settings, where it produces a comfortable 94.8 FPS average. The data shows a system that is clearly capable at mainstream resolutions but runs out of headroom when pushed to maximum fidelity at higher pixel counts.

Measured FPS Breakdown

The measured frame rates for this combination are reported as average FPS only, with no minimum or maximum values provided in the data. Across all resolutions and settings, the pattern is consistent: lower settings yield significantly higher frame rates, and higher resolutions compress the performance envelope.

At 1920x1080, the combo starts at 126.8 FPS on Low settings. Medium drops to 75.8 FPS, High to 69.8 FPS, and Ultra settles at 60.6 FPS. The drop from Low to Medium is substantial—a 51 FPS difference—while the gap from Medium to Ultra is a more modest 15.2 FPS. Notably, Ultra still clears the 60 FPS playable threshold, making 1080p the only resolution where every preset is viable.

At 2560x1440, Low settings produce 108.7 FPS, which is a 14.2% reduction compared to 1080p Low. Medium yields 70 FPS, High drops to 64.6 FPS, and Ultra falls to 50.8 FPS. The Medium-to-High transition costs 5.4 FPS, while High-to-Ultra costs 13.8 FPS. The Ultra preset here is the first clear miss, sitting 9.2 FPS below the 60 FPS playable mark.

At 3840x2160, the performance curve steepens. Low settings still deliver 94.8 FPS, which is remarkably high for 4K and indicates the game is not overly demanding at that preset. Medium falls to 57.4 FPS, High to 58.1 FPS, and Ultra to 47.3 FPS. Interestingly, High is actually 0.7 FPS faster than Medium at 4K, a minor inversion that suggests the two presets are nearly identical in cost. Both Medium and High miss the 60 FPS threshold by roughly 2-3 FPS, while Ultra trails by 12.7 FPS.

The scaling from 1080p to 4K at the same settings shows a clear trend. At Low, the drop is from 126.8 to 94.8 FPS—a 25.2% reduction. At Medium, it goes from 75.8 to 57.4 FPS, a 24.3% reduction. At High, from 69.8 to 58.1 FPS, a 16.8% reduction. At Ultra, from 60.6 to 47.3 FPS, a 21.9% reduction. The High preset exhibits the smallest relative loss, indicating that resolution scaling is not perfectly linear and that the game’s engine handles certain settings more efficiently at higher pixel counts.

How This Combo Ranks

The Ryzen 9 5900X and Arc B580 combination ranks 2829th out of 3713 tested combos for Overpower. This places it in the lower-middle portion of the database, at roughly the 76th percentile of all tested systems. The rank reflects the GPU’s position more than the CPU’s, as the Arc B580 sits at the 68th percentile among all GPUs, while the Ryzen 9 5900X sits at the 87th percentile among all CPUs.

In practical terms, this rank means that a significant majority of tested combos deliver higher frame rates in Overpower. The combo is not a top-tier performer, but it is far from the bottom. The data shows that the system can handle the game at playable levels in most scenarios, but it will not compete with high-end configurations that pair flagship CPUs with top-tier GPUs.

The rank also suggests that the Arc B580 is the limiting factor in this pairing. The GPU’s 68th percentile standing is well below the CPU’s 87th percentile, indicating that the processor has substantial headroom that the graphics card cannot fully utilize. This is consistent with the measured FPS results, where the system struggles at 4K Ultra but performs admirably at 1080p Low.

CPU and GPU Roles

In Overpower, the GPU is the dominant component at every resolution, but the CPU’s influence becomes more apparent at lower settings and lower resolutions. The data shows that the Arc B580’s performance ceiling is the primary constraint, particularly at 4K, where the gap between Low and Ultra settings is 47.5 FPS.

At 3840x2160, the GPU is almost entirely responsible for frame rates. The CPU’s 12 cores and 24 threads are more than sufficient to feed the graphics card at this resolution, as evidenced by the fact that Low settings still produce 94.8 FPS. The drop to 47.3 FPS at Ultra is entirely a GPU-bound effect, as the increased pixel workload overwhelms the Arc B580’s 2560 shading units and 80 ROPs.

At 2560x1440, the balance shifts slightly. Low settings yield 108.7 FPS, which is near the GPU’s practical limit for this resolution. The CPU begins to matter more at Medium and High, where the frame rates of 70 FPS and 64.6 FPS respectively suggest that the processor is keeping pace but not bottlenecking. Ultra at 50.8 FPS is again GPU-limited.

At 1920x1080, the CPU’s role becomes most evident. Low settings produce 126.8 FPS, which is high enough that the Ryzen 9 5900X’s single-thread performance (3dmark single-thread score of 941) and multi-thread capabilities (3dmark max threads score of 10075) are being taxed. The scaling from Low to Medium (a 51 FPS drop) indicates that the GPU is still the bottleneck, but the CPU is no longer idle. At Ultra, the 60.6 FPS result shows that the combo is just barely keeping the GPU fed enough to maintain playability.

The CPU’s benchmark scores reinforce this interpretation. The Ryzen 9 5900X posts a Cinebench R23 multi-core score of 16262 and a single-core score of 1527, placing it at the 87th percentile among all CPUs. These scores suggest that the processor is capable of handling any game engine workload Overpower presents, but the GPU’s 68th percentile ranking and 13.67 TFLOPS FP32 throughput cap the overall frame rate.

The Verdict

The verdict is clear: this PC can run Overpower at playable frame rates in most configurations, but not all. The playable threshold is defined as 60 FPS average, and the data shows which settings and resolutions meet that bar.

At 1920x1080, all four settings presets—Low, Medium, High, and Ultra—are playable. Ultra produces 60.6 FPS, which barely clears the threshold, while Low delivers 126.8 FPS for a highly fluid experience. The best settings for this resolution are Ultra, as it offers the highest visual quality while still maintaining playability.

At 2560x1440, three presets are playable: Low (108.7 FPS), Medium (70 FPS), and High (64.6 FPS). Ultra is not playable, falling to 50.8 FPS. The best settings are High, which provides the highest visual quality among the playable options at 64.6 FPS.

At 3840x2160, only Low is playable, producing 94.8 FPS. Medium (57.4 FPS), High (58.1 FPS), and Ultra (47.3 FPS) all miss the 60 FPS threshold. The best settings are Low, which is the only preset that clears the bar at this resolution.

For users prioritizing visual fidelity, 1080p Ultra is the sweet spot. For those seeking higher resolutions, 1440p High is the best balance of quality and performance. 4K is only viable at Low settings, which may not be acceptable for players who expect high-end visuals at that resolution.

Similar Performance Alternatives

The nearest rivals for the CPU and GPU provide context for what other hardware would behave similarly. For the AMD Ryzen 9 5900X, the closest competitors by average benchmark score are the Intel Core Ultra 7 366H (0.3% faster), Intel Core Ultra 7 356H (0.4% faster), AMD Ryzen AI 5 PRO 440 (0.4% faster), and Intel Core i7-14650HX (0.5% slower). These processors would deliver nearly identical CPU-bound performance in Overpower, meaning that any of them paired with the Arc B580 would produce similar frame rates in CPU-limited scenarios.

For the Intel Arc B580, the nearest rivals are the AMD Radeon RX 580 2048SP (0.2% faster), NVIDIA GeForce RTX 2080 (0.6% faster), NVIDIA GeForce RTX 3080 (0.7% slower), and NVIDIA P106-100 (1% slower). The RTX 2080 and RTX 3080 are particularly notable, as they represent older high-end GPUs that would deliver comparable or slightly better performance in Overpower at the same settings. The RX 580 2048SP is a much older card but still lands within 0.2% of the Arc B580’s average score, indicating that the Intel GPU’s performance is roughly equivalent to a mid-range card from several generations ago.

In practice, a system with a Ryzen 9 5900X and any of these rival GPUs would produce frame rates within a few percentage points of the measured results. The RTX 3080, being 0.7% slower on average, would likely see nearly identical FPS numbers, while the RTX 2080, at 0.6% faster, might edge out the Arc B580 by a frame or two in GPU-bound scenes. The CPU rivals would have no meaningful impact on Overpower’s frame rates, as the game is not particularly CPU-intensive at the settings tested.

FAQ

Q: Can this combo run Overpower at 4K Ultra settings?

A: No. At 3840x2160 Ultra, the average FPS is 47.3, which is 12.7 FPS below the 60 FPS playable threshold. Only Low settings are playable at 4K, with an average of 94.8 FPS.

Q: What is the best settings preset for 1440p?

A: High is the best playable preset at 2560x1440, producing 64.6 FPS average. Ultra is not playable at 50.8 FPS, while Medium and Low are also playable but offer lower visual quality.

Q: How does the Arc B580 compare to the RTX 3080 in this game?

A: The Arc B580 has an average benchmark score 0.7% lower than the RTX 3080. In Overpower, this translates to nearly identical frame rates, with the RTX 3080 potentially being a frame or two faster in GPU-bound scenarios.

Q: Is the Ryzen 9 5900X a bottleneck for the Arc B580?

A: No. The CPU ranks at the 87th percentile among all CPUs, while the GPU ranks at the 68th percentile. The GPU is the limiting factor at all resolutions, as evidenced by the fact that frame rates scale significantly with settings changes but less so with resolution changes at the same settings.

Q: What is the playable threshold and how does this combo fare?

A: The playable threshold is 60 FPS average. The combo clears this at 1080p all presets, 1440p Low/Medium/High, and 4K Low. It fails at 1440p Ultra and 4K Medium/High/Ultra.

Q: What settings should I use for 1080p if I want the best visual quality?

A: Ultra is the best choice, as it produces 60.6 FPS average, which barely clears the 60 FPS threshold. This provides the highest fidelity while remaining playable.